lkml.org 
[lkml]   [2007]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.20 PCI Cannot allocate resource region 2
On 2/6/07, Manu Abraham <abraham.manu@gmail.com> wrote:
> On 2/6/07, Luming Yu <luming.yu@gmail.com> wrote:
> > > dang !
> > >
> > > rebooted it into 2.6.17.7
> > >
> > > no errors, during a bootup, BIST isn't running anymore
> > > running M$ did change the status from dead to alive ??? shocked !!
> >
> > Interesting! does windows driver fixes the broken firmware/flash on this card?
>
>
> No firmware/flash on the card.
>
>
> >
> > >
> > > attached lspci output in the very same setup as earlier, no difference
> > > in anything, except that it was rebooted into windows.
> > >
> > > the PCI config dump would help ?
> > >
> >
> > I guess you would never reproduce this issue again unless you can
> > restore the broken firmware/flash on this card. :-)
> >
>
> none on the card, a flash or a firmware .. it has a 24c02 EEPROM for
> vendor information, that's all
>

You can see the same from this picture

regards,
manu
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-02-06 13:59    [W:3.474 / U:0.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site