This message generated a parse failure. Raw output follows here. Please use 'back' to navigate. From devnull@lkml.org Tue Apr 23 09:53:46 2024 Delivery-date: Sun, 04 Feb 2007 21:02:17 +0000 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752557AbXBDVBk (ORCPT ); Sun, 4 Feb 2007 16:01:40 -0500 Received: from reserv6.univ-lille1.fr ([193.49.225.20]:46113 "EHLO reserv6.univ-lille1.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752556AbXBDVBi (ORCPT ); Sun, 4 Feb 2007 16:01:38 -0500 Received: from reserv1.univ-lille1.fr (root@reserv1.univ-lille1.fr [193.49.225.15]) by reserv6.univ-lille1.fr (8.13.7/jtpda-5.3.1) with ESMTP id l14L16cl009179 ; Sun, 4 Feb 2007 22:01:08 +0100 Received: from [192.168.1.10] (2.20.71-86.rev.gaoland.net [86.71.20.2] (may be forged)) (authenticated bits=0) by reserv1.univ-lille1.fr (8.13.7/8.13.7) with ESMTP id l14L1FIj020749 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Sun, 4 Feb 200 Message-Id: <45C64960.3080605@tremplin-utc.net> Date: Sun, 04 Feb 2007 22:00:16 +0100 From: Eric Piel User-Agent: Thunderbird 1.5.0.9 (X11/20070105) Mime-Version: 1.0 To: Dave Jones Cc: Wang Zhenyu , linux-kernel@vger.kernel.org, Adrian Bunk Subject: Re: 2.6.20-rc7 regression on intel-agp References: <45C6010A.9010902@tremplin-utc.net> <20070204171850.GA17171@redhat.com> In-Reply-To: <20070204171850.GA17171@redhat.com> Content-Type: multipart/mixed; boundary="------------000803070300060305050707" X-Greylist: Sender DNS name whitelisted, not delayed by milter-greylist-2.0.2 (reserv6.univ-lille1.fr [193.49.225.20]); Sun, 04 Feb 2007 22:01:08 +0100 (CET) X-USTL-MailScanner-Information: Please contact the ISP for more information X-USTL-MailScanner: Found to be clean X-USTL-MailScanner-From: eric.piel@tremplin-utc.net X-Spam-Status: No Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org This is a multi-part message in MIME format. --------------000803070300060305050707 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit 04.02.2007 18:18, Dave Jones wrote/a écrit: > On Sun, Feb 04, 2007 at 04:51:38PM +0100, Eric Piel wrote: > > Hello, > > > > I've got a regression in 2.6.20-rc7 (-rc6 was fine) due to commit > > 4b95320fc4d21b0ff2f8604305dd6c851aff6096 ([AGPGART] intel_agp: restore > > graphics device's pci space early in resume). : > > There's an ugly patch below which does the latter. Give it a try? Thanks a lot, this made the trick... to some extends at least. I can suspend to disk and resume fine. The framebuffer is not garble neither, however nothing is displayed after resuming :-S Well, it's probably enough to be applied before 2.6.20. Attached is the new dmesg, just in case you are interested. See you, Eric --------------000803070300060305050707 Content-Type: text/plain; name="i810-resume-strange.dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="i810-resume-strange.dmesg" Linux version 2.6.20-rc7-eric-usbas (eric@circle) (gcc version 4.1.2 20070115 (prerelease) (4.1.2-0.20070115.1mdv2007.1)) #12 PREEMPT Sun Feb 4 20:39:10 CET 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009f400 end: 000000000009f400 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009f400 size: 0000000000000c00 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000cc000 size: 0000000000004000 end: 00000000000d0000 type: 2 copy_e820_map() start: 00000000000e4800 size: 000000000001b800 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000001fd70000 end: 000000001fe70000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000001fe70000 size: 000000000000fc00 end: 000000001fe7fc00 type: 3 copy_e820_map() start: 000000001fe7fc00 size: 0000000000000400 end: 000000001fe80000 type: 4 copy_e820_map() start: 000000001fe80000 size: 0000000000180000 end: 0000000020000000 type: 2 copy_e820_map() start: 00000000ff800000 size: 0000000000400000 end: 00000000ffc00000 type: 2 copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e4800 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fe70000 (usable) BIOS-e820: 000000001fe70000 - 000000001fe7fc00 (ACPI data) BIOS-e820: 000000001fe7fc00 - 000000001fe80000 (ACPI NVS) BIOS-e820: 000000001fe80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 510MB LOWMEM available. Entering add_active_range(0, 0, 130672) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 130672 early_node_map[1] active PFN ranges 0: 0 -> 130672 On node 0 totalpages: 130672 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 988 pages used for memmap Normal zone: 125588 pages, LIFO batch:31 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f6550 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1fe7b9f3 ACPI: FADT (v001 Acer TM610 0x06040000 Acer 0x00000001) @ 0x1fe7fb64 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1fe7fbd8 ACPI: DSDT (v001 INTEL SolanoM2 0x06040000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 30000000 (gap: 20000000:df800000) Detected 698.514 MHz processor. Built 1 zonelists. Total pages: 129652 Kernel command line: BOOT_IMAGE=2.6.20-rc7-eric-usbas root=LABEL=racine lapic resume=/dev/sda7 video=i810fb:xres:1024,yres:768,hsync1:32,hsync2:48,vsync1:50,vsync2:70,vram:2,bpp:16,mtrr:1 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! mapped APIC to ffffd000 (fee00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c03e1000 soft=c03e0000 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 514104k/522688k available (1915k kernel code, 7908k reserved, 833k data, 168k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffff7000 - 0xfffff000 ( 32 kB) vmalloc : 0xe0800000 - 0xffff5000 ( 503 MB) lowmem : 0xc0000000 - 0xdfe70000 ( 510 MB) .init : 0xc03b1000 - 0xc03db000 ( 168 kB) .data : 0xc02ded89 - 0xc03af534 ( 833 kB) .text : 0xc0100000 - 0xc02ded89 (1915 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1398.93 BogoMIPS (lpj=2329490) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Pentium III (Coppermine) stepping 0a Checking 'hlt' instruction... OK. Early unpacking initramfs... done ACPI: Core revision 20060707 ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. ACPI (tbget-0297): Table [DSDT] replaced by host OS [20060707] ACPI: setting ELCR to 0200 (from 0c00) PM: Adding info for No Bus:platform NET: Registered protocol family 16 PM: Adding info for No Bus:vtcon0 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd790, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing PM: Adding info for acpi:acpi ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PM: Adding info for No Bus:pci0000:00 Boot video device is 0000:00:02.0 PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#01) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently PCI: Bus #06 (-#09) is hidden behind transparent bridge #01 (-#01) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently PCI: Bus #0a (-#0d) is hidden behind transparent bridge #01 (-#01) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:02.0 PM: Adding info for pci:0000:00:1e.0 PM: Adding info for pci:0000:00:1f.0 PM: Adding info for pci:0000:00:1f.1 PM: Adding info for pci:0000:00:1f.2 PM: Adding info for pci:0000:00:1f.3 PM: Adding info for pci:0000:00:1f.4 PM: Adding info for pci:0000:00:1f.5 PM: Adding info for pci:0000:00:1f.6 PM: Adding info for pci:0000:01:06.0 PM: Adding info for pci:0000:01:08.0 PM: Adding info for pci:0000:01:0f.0 PM: Adding info for pci:0000:01:0f.1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 7 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 7 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 7 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 7 *10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 7 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7 *10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 7 10 11) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init PM: Adding info for No Bus:pnp0 PM: Adding info for pnp:00:00 PM: Adding info for pnp:00:01 PM: Adding info for pnp:00:02 PM: Adding info for pnp:00:03 PM: Adding info for pnp:00:04 PM: Adding info for pnp:00:05 PM: Adding info for pnp:00:06 PM: Adding info for pnp:00:07 PM: Adding info for pnp:00:08 PM: Adding info for pnp:00:09 PM: Adding info for pnp:00:0a PM: Adding info for pnp:00:0b pnp: PnP ACPI: found 12 devices PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized libata version 2.00 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PM: Adding info for No Bus:mem PM: Adding info for No Bus:kmem PM: Adding info for No Bus:null PM: Adding info for No Bus:port PM: Adding info for No Bus:zero PM: Adding info for No Bus:full PM: Adding info for No Bus:random PM: Adding info for No Bus:urandom PM: Adding info for No Bus:kmsg PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bus 2, cardbus bridge: 0000:01:06.0 IO window: 00003400-000034ff IO window: 00003800-000038ff PREFETCH window: 30000000-33ffffff MEM window: 3c000000-3fffffff PCI: Bus 6, cardbus bridge: 0000:01:0f.0 IO window: 00003c00-00003cff IO window: 00001400-000014ff PREFETCH window: 34000000-37ffffff MEM window: 40000000-43ffffff PCI: Bus 10, cardbus bridge: 0000:01:0f.1 IO window: 00002800-000028ff IO window: 00002c00-00002cff PREFETCH window: 38000000-3bffffff MEM window: 44000000-47ffffff PCI: Bridge: 0000:00:1e.0 IO window: 3000-3fff MEM window: f4100000-f41fffff PREFETCH window: 30000000-3bffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:01:06.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:01:0f.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:01:0f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Unpacking initramfs... done Freeing initrd memory: 258k freed PM: Adding info for platform:pcspkr Simple Boot Flag at 0x36 set to 0x1 PM: Adding info for No Bus:snapshot VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler cfq registered (default) pci 0000:00:1f.2: uhci_check_and_reset_hc: legsup = 0x1f20 pci 0000:00:1f.2: Performing full reset pci 0000:00:1f.4: uhci_check_and_reset_hc: cmd = 0x00c1 pci 0000:00:1f.4: Performing full reset PM: Adding info for No Bus:pnp1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PM: Adding info for No Bus:tty PM: Adding info for No Bus:console PM: Adding info for No Bus:ptmx PM: Adding info for No Bus:tty0 PM: Adding info for No Bus:vcs PM: Adding info for No Bus:vcsa PM: Adding info for No Bus:tty1 PM: Adding info for No Bus:tty2 PM: Adding info for No Bus:tty3 PM: Adding info for No Bus:tty4 PM: Adding info for No Bus:tty5 PM: Adding info for No Bus:tty6 PM: Adding info for No Bus:tty7 PM: Adding info for No Bus:tty8 PM: Adding info for No Bus:tty9 PM: Adding info for No Bus:tty10 PM: Adding info for No Bus:tty11 PM: Adding info for No Bus:tty12 PM: Adding info for No Bus:tty13 PM: Adding info for No Bus:tty14 PM: Adding info for No Bus:tty15 PM: Adding info for No Bus:tty16 PM: Adding info for No Bus:tty17 PM: Adding info for No Bus:tty18 PM: Adding info for No Bus:tty19 PM: Adding info for No Bus:tty20 PM: Adding info for No Bus:tty21 PM: Adding info for No Bus:tty22 PM: Adding info for No Bus:tty23 PM: Adding info for No Bus:tty24 PM: Adding info for No Bus:tty25 PM: Adding info for No Bus:tty26 PM: Adding info for No Bus:tty27 PM: Adding info for No Bus:tty28 PM: Adding info for No Bus:tty29 PM: Adding info for No Bus:tty30 PM: Adding info for No Bus:tty31 PM: Adding info for No Bus:tty32 PM: Adding info for No Bus:tty33 PM: Adding info for No Bus:tty34 PM: Adding info for No Bus:tty35 PM: Adding info for No Bus:tty36 PM: Adding info for No Bus:tty37 PM: Adding info for No Bus:tty38 PM: Adding info for No Bus:tty39 PM: Adding info for No Bus:tty40 PM: Adding info for No Bus:tty41 PM: Adding info for No Bus:tty42 PM: Adding info for No Bus:tty43 PM: Adding info for No Bus:tty44 PM: Adding info for No Bus:tty45 PM: Adding info for No Bus:tty46 PM: Adding info for No Bus:tty47 PM: Adding info for No Bus:tty48 PM: Adding info for No Bus:tty49 PM: Adding info for No Bus:tty50 PM: Adding info for No Bus:tty51 PM: Adding info for No Bus:tty52 PM: Adding info for No Bus:tty53 PM: Adding info for No Bus:tty54 PM: Adding info for No Bus:tty55 PM: Adding info for No Bus:tty56 PM: Adding info for No Bus:tty57 PM: Adding info for No Bus:tty58 PM: Adding info for No Bus:tty59 PM: Adding info for No Bus:tty60 PM: Adding info for No Bus:tty61 PM: Adding info for No Bus:tty62 PM: Adding info for No Bus:tty63 intel_rng: FWH not detected Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel i815 Chipset. agpgart: detected 4MB dedicated video ram. PM: Adding info for No Bus:agpgart agpgart: AGP aperture is 64M @ 0xf8000000 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PM: Adding info for No Bus:fb0 PM: Adding info for No Bus:vtcon1 Console: switching to colour frame buffer device 128x48 I810FB: fb0 : Intel(R) 815 (Internal Graphics with AGP) Framebuffer Device v0.9.0 I810FB: Video RAM : 2048K I810FB: Monitor : H: 32-48 KHz V: 50-70 Hz I810FB: Mode : 1024x768-16bpp@60Hz PM: Adding info for No Bus:isa ata_piix 0000:00:1f.1: version 2.00ac7 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x1800 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1808 irq 15 scsi0 : ata_piix PM: Adding info for No Bus:host0 ata1.00: ATA-5, max UDMA/100, 58605120 sectors: LBA ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 scsi1 : ata_piix PM: Adding info for No Bus:host1 ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 PM: Adding info for No Bus:target0:0:0 scsi 0:0:0:0: Direct-Access ATA IC25N030ATDA04-0 DA4O PQ: 0 ANSI: 5 PM: Adding info for scsi:0:0:0:0 SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4 sd 0:0:0:0: Attached scsi disk sda PM: Adding info for No Bus:target1:0:0 scsi 1:0:0:0: CD-ROM MATSHITA UJDA710 1.00 PQ: 0 ANSI: 5 PM: Adding info for scsi:1:0:0:0 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 PM: Adding info for platform:i8042 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 PM: Adding info for serio:serio0 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 PM: Adding info for serio:serio1 mice: PS/2 mouse device common for all mice PM: Adding info for serio:serio2 TCP cubic registered NET: Registered protocol family 1 Testing NMI watchdog ... <7>PM: Adding info for serio:serio3 OK. Using IPI Shortcut mode swsusp: Resume From Partition /dev/sda7 PM: Checking swsusp image. PM: Resume from disk failed. ACPI: (supports S0 S1 S4 S5) Time: tsc clocksource has been installed. BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 168k freed Write protecting the kernel read-only data: 671k PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Adding info for serio:serio4 input: AT Translated Set 2 keyboard as /class/input/input0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: UHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: detected 2 ports uhci_hcd 0000:00:1f.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1f.2: Performing full reset uhci_hcd 0000:00:1f.2: irq 10, io base 0x00001820 usb usb1: default language 0x0409 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.20-rc7-eric-usbas uhci_hcd usb usb1: SerialNumber: 0000:00:1f.2 PM: Adding info for usb:usb1 usb usb1: uevent usb usb1: usb_probe_device PM: Adding info for No Bus:usbdev1.1_ep00 usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) PM: Adding info for usb:1-0:1.0 usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 2ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 PM: Adding info for No Bus:usbdev1.1_ep81 drivers/usb/core/inode.c: creating file '001' ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: UHCI Host Controller drivers/usb/core/inode.c: creating file '002' uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1f.4: detected 2 ports uhci_hcd 0000:00:1f.4: uhci_check_and_reset_hc: legsup = 0x2000 uhci_hcd 0000:00:1f.4: Performing full reset uhci_hcd 0000:00:1f.4: irq 11, io base 0x00001840 usb usb2: default language 0x0409 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.20-rc7-eric-usbas uhci_hcd usb usb2: SerialNumber: 0000:00:1f.4 PM: Adding info for usb:usb2 usb usb2: uevent usb usb2: usb_probe_device PM: Adding info for No Bus:usbdev2.1_ep00 usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) PM: Adding info for usb:2-0:1.0 usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 PM: Adding info for No Bus:usbdev2.1_ep81 drivers/usb/core/inode.c: creating file '001' sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 usb usb1: suspend_rh (auto-stop) usb usb2: suspend_rh (auto-stop) hub 1-0:1.0: hub_suspend usb usb1: suspend_rh usb usb1: usb auto-suspend hub 2-0:1.0: hub_suspend usb usb2: suspend_rh usb usb2: usb auto-suspend wistron_btns: BIOS signature found at c00f64f0, entry point 000FDD30 PM: Adding info for platform:wistron-bios input: Wistron laptop buttons as /class/input/input1 input: PC Speaker as /class/input/input2 speedstep: frequency transition measured seems out of range (7200 nSec), falling back to a safe one of 500000 nSec. Time: acpi_pm clocksource has been installed. Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0 Yenta: CardBus bridge found at 0000:01:06.0 [12a3:ab01] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:01:06.0, mfunc 0x01000002, devctl 0x60 input: SynPS/2 Synaptics TouchPad as /class/input/input3 Yenta: ISA IRQ mask 0x0000, PCI irq 10 Socket status: 30000059 Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05 pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff cs: IO port probe 0x3000-0x3fff: clean. pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x3bffffff Yenta: CardBus bridge found at 0000:01:0f.0 [1025:1016] Yenta O2: res at 0x94/0xD4: e8/00 Yenta O2: enabling read prefetch/write burst Yenta: ISA IRQ mask 0x00b8, PCI irq 11 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#01) from #05 to #09 pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff cs: IO port probe 0x3000-0x3fff: clean. pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x3bffffff Yenta: CardBus bridge found at 0000:01:0f.1 [1025:1016] Yenta: ISA IRQ mask 0x00b8, PCI irq 11 Socket status: 30000410 Yenta: Raising subordinate bus# of parent bus (#01) from #09 to #0d pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff cs: IO port probe 0x3000-0x3fff: clean. pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x3bffffff cs: IO port probe 0x100-0x3af: excluding 0x158-0x15f 0x278-0x27f 0x2f8-0x2ff 0x360-0x367 cs: IO port probe 0x3e0-0x4ff: excluding 0x3f8-0x3ff 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. pccard: PCMCIA card inserted into slot 0 cs: memory probe 0xf4100000-0xf41fffff: excluding 0xf4100000-0xf410ffff pcmcia: registering new device pcmcia0.0 PM: Adding info for pcmcia:0.0 orinoco 0.15 (David Gibson , Pavel Roskin , et al) cs: IO port probe 0x100-0x3af: excluding 0x158-0x15f 0x278-0x27f 0x2f8-0x2ff 0x360-0x367 cs: IO port probe 0x3e0-0x4ff: excluding 0x3f8-0x3ff 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0x100-0x3af: excluding 0x158-0x15f 0x278-0x27f 0x2f8-0x2ff 0x360-0x367 cs: IO port probe 0x3e0-0x4ff: excluding 0x3f8-0x3ff 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. orinoco_cs 0.15 (David Gibson , Pavel Roskin , et al) pcmcia: request for exclusive IRQ could not be fulfilled. pcmcia: the driver needs updating to supported shared IRQ lines. eth0: Hardware identity 0005:0002:0001:0002 eth0: Station identity 001f:0001:0008:0048 eth0: Firmware determined as Lucent/Agere 8.72 eth0: Ad-hoc demo mode supported eth0: IEEE standard IBSS ad-hoc mode supported eth0: WEP supported, 104-bit key eth0: MAC address 00:02:2D:25:7E:6C eth0: Station name "HERMES I" eth0: ready eth0: orinoco_cs at 0.0, irq 10, io 0x3040-0x307f ACPI: AC Adapter [AC] (on-line) e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 e100: eth1: e100_probe: addr 0xf4100000, irq 11, MAC addr 00:00:E2:4F:5B:1F ACPI: Battery Slot [BATA] (battery present) ACPI: Battery Slot [BATB] (battery absent) input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input5 ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /class/input/input6 ACPI: Lid Switch [LID] ACPI: CPU0 (power states: C1[C1] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (42 C) ACPI: Video Device [GRFX] (multi-head: yes rom: no post: no) pccard: PCMCIA card inserted into slot 2 cs: memory probe 0xf4100000-0xf41fffff: excluding 0xf4100000-0xf411ffff pcmcia: registering new device pcmcia2.0 PM: Adding info for pcmcia:2.0 EXT3 FS on sda5, internal journal Adding 546168k swap on /dev/sda7. Priority:-1 extents:1 across:546168k kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. loop: loaded (max 8 devices) PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 nf_conntrack version 0.5.0 (4083 buckets, 32664 max) ip_tables: (C) 2000-2006 Netfilter Core Team ata1.00: configured for UDMA/100 ata1: EH complete SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA nf_conntrack version 0.5.0 (4083 buckets, 32664 max) NET: Registered protocol family 10 process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead. PM: Adding info for No Bus:timer PCI: Enabling device 0000:00:1f.5 (0000 -> 0001) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.5 to 64 NET: Registered protocol family 17 intel8x0_measure_ac97_clock: measured 52539 usecs intel8x0: clocking to 48000 PM: Adding info for No Bus:card0 PM: Adding info for No Bus:pcmC0D1c PM: Adding info for No Bus:pcmC0D0p PM: Adding info for No Bus:pcmC0D0c PM: Adding info for ac97:0-0:ALC200,200P PM: Adding info for No Bus:controlC0 PM: Adding info for No Bus:mixer PM: Adding info for No Bus:adsp PM: Adding info for No Bus:dsp PM: Adding info for No Bus:audio ADDRCONF(NETDEV_UP): eth0: link is not ready PM: Adding info for No Bus:seq PM: Adding info for No Bus:sequencer PM: Adding info for No Bus:sequencer2 pccard: card ejected from slot 0 PM: Removing info for pcmcia:0.0 pccard: card ejected from slot 2 PM: Removing info for pcmcia:2.0 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Removing info for No Bus:vcs2 PM: Removing info for No Bus:vcsa2 PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 PM: Removing info for No Bus:vcs3 PM: Removing info for No Bus:vcsa3 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Removing info for No Bus:vcs4 PM: Removing info for No Bus:vcsa4 PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Adding info for No Bus:vcs5 PM: Adding info for No Bus:vcsa5 PM: Removing info for No Bus:vcs5 PM: Removing info for No Bus:vcsa5 PM: Adding info for No Bus:vcs5 PM: Adding info for No Bus:vcsa5 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 PM: Removing info for No Bus:vcs6 PM: Removing info for No Bus:vcsa6 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 PM: Removing info for No Bus:vcs7 PM: Removing info for No Bus:vcsa7 PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 [drm] Initialized drm 1.1.0 20060810 [drm] Initialized i810 1.4.0 20030605 on minor 0 mtrr: base(0xf8000000) is not aligned on a size(0x180000) boundary [drm] Using v1.4 init. Stopping tasks ... done. Shrinking memory... -done (0 pages freed) Freed 0 kbytes in 0.04 seconds (0.00 MB/s) Suspending console(s) ac97 0-0:ALC200,200P: freeze wistron-bios wistron-bios: freeze usbdev2.1_ep81: PM: suspend 0->1, parent 2-0:1.0 already 2 hub 2-0:1.0: PM: suspend 2-->1 hub 2-0:1.0: PM: suspend 2->1, parent usb2 already 2 usbdev2.1_ep00: PM: suspend 0->1, parent usb2 already 2 usb usb2: PM: suspend 2-->1 usbdev1.1_ep81: PM: suspend 0->1, parent 1-0:1.0 already 2 hub 1-0:1.0: PM: suspend 2-->1 hub 1-0:1.0: PM: suspend 2->1, parent usb1 already 2 usbdev1.1_ep00: PM: suspend 0->1, parent usb1 already 2 usb usb1: PM: suspend 2-->1 i8042 i8042: freeze sr 1:0:0:0: freeze sd 0:0:0:0: freeze pcspkr pcspkr: freeze pnp 00:0b: freeze pnp 00:0a: freeze pnp 00:09: freeze i8042 aux 00:08: freeze i8042 kbd 00:07: freeze pnp 00:06: freeze pnp 00:05: freeze pnp 00:04: freeze pnp 00:03: freeze system 00:02: freeze system 00:01: freeze pnp 00:00: freeze yenta_cardbus 0000:01:0f.1: freeze yenta_cardbus 0000:01:0f.0: freeze e100 0000:01:08.0: freeze ACPI: PCI interrupt for device 0000:01:08.0 disabled yenta_cardbus 0000:01:06.0: freeze pci 0000:00:1f.6: freeze Intel ICH 0000:00:1f.5: freeze ACPI: PCI interrupt for device 0000:00:1f.5 disabled uhci_hcd 0000:00:1f.4: freeze uhci_hcd 0000:00:1f.4: uhci_suspend ACPI: PCI interrupt for device 0000:00:1f.4 disabled uhci_hcd 0000:00:1f.4: --> PCI D0/legacy pci 0000:00:1f.3: freeze uhci_hcd 0000:00:1f.2: freeze uhci_hcd 0000:00:1f.2: uhci_suspend ACPI: PCI interrupt for device 0000:00:1f.2 disabled uhci_hcd 0000:00:1f.2: --> PCI D0/legacy ata_piix 0000:00:1f.1: freeze pci 0000:00:1f.0: freeze pci 0000:00:1e.0: freeze i810fb 0000:00:02.0: freeze agpgart-intel 0000:00:00.0: freeze acpi acpi: freeze PM: snapshotting memory. wistron-bios wistron-bios: LATE freeze i8042 i8042: LATE freeze pcspkr pcspkr: LATE freeze yenta_cardbus 0000:01:0f.1: LATE freeze yenta_cardbus 0000:01:0f.0: LATE freeze e100 0000:01:08.0: LATE freeze yenta_cardbus 0000:01:06.0: LATE freeze pci 0000:00:1f.6: LATE freeze Intel ICH 0000:00:1f.5: LATE freeze pci 0000:00:1f.3: LATE freeze pci 0000:00:1f.0: LATE freeze pci 0000:00:1e.0: LATE freeze agpgart-intel 0000:00:00.0: LATE freeze swsusp: critical section: swsusp: Need to copy 48215 pages swsusp: Normal pages needed: 48215 + 1024 + 14, available pages: 82455 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. agpgart-intel 0000:00:00.0: EARLY resume i810fb 0000:00:02.0: EARLY resume pci 0000:00:1e.0: EARLY resume pci 0000:00:1f.0: EARLY resume ata_piix 0000:00:1f.1: EARLY resume uhci_hcd 0000:00:1f.2: EARLY resume pci 0000:00:1f.3: EARLY resume uhci_hcd 0000:00:1f.4: EARLY resume Intel ICH 0000:00:1f.5: EARLY resume pci 0000:00:1f.6: EARLY resume yenta_cardbus 0000:01:06.0: EARLY resume e100 0000:01:08.0: EARLY resume yenta_cardbus 0000:01:0f.0: EARLY resume yenta_cardbus 0000:01:0f.1: EARLY resume pcspkr pcspkr: EARLY resume i8042 i8042: EARLY resume wistron-bios wistron-bios: EARLY resume PM: Image restored successfully. acpi acpi: resuming agpgart-intel 0000:00:00.0: resuming PM: Writing back config space on device 0000:00:02.0 at offset f (was 10b, writing 0) PM: Writing back config space on device 0000:00:02.0 at offset d (was dc, writing 0) PM: Writing back config space on device 0000:00:02.0 at offset b (was 10161025, writing 0) PM: Writing back config space on device 0000:00:02.0 at offset 5 (was f4000000, writing 0) PM: Writing back config space on device 0000:00:02.0 at offset 4 (was f8000008, writing 0) PM: Writing back config space on device 0000:00:02.0 at offset 2 (was 3000011, writing 0) PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 2b00007, writing 0) PM: Writing back config space on device 0000:00:02.0 at offset 0 (was 11328086, writing 0) agpgart: detected 4MB dedicated video ram. i810fb 0000:00:02.0: resuming pci 0000:00:1e.0: resuming PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22803030, writing 2803030) PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 40010100, writing 400d0100) PCI: Setting latency timer of device 0000:00:1e.0 to 64 pci 0000:00:1f.0: resuming ata_piix 0000:00:1f.1: resuming PCI: Setting latency timer of device 0000:00:1f.1 to 64 uhci_hcd 0000:00:1f.2: resuming uhci_hcd 0000:00:1f.2: PCI legacy resume ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: uhci_resume uhci_hcd 0000:00:1f.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1f.2: Performing full reset usb usb1: root hub lost power or was reset usb usb1: suspend_rh pci 0000:00:1f.3: resuming uhci_hcd 0000:00:1f.4: resuming uhci_hcd 0000:00:1f.4: PCI legacy resume ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: uhci_resume uhci_hcd 0000:00:1f.4: uhci_check_and_reset_hc: legsup = 0x2000 uhci_hcd 0000:00:1f.4: Performing full reset usb usb2: root hub lost power or was reset usb usb2: suspend_rh Intel ICH 0000:00:1f.5: resuming PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2800000, writing 2800001) ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.5 to 64 pci 0000:00:1f.6: resuming yenta_cardbus 0000:01:06.0: resuming PM: Writing back config space on device 0000:01:06.0 at offset f (was 34001ff, writing 5c001ff) PM: Writing back config space on device 0000:01:06.0 at offset 3 (was 24000, writing 2a808) pccard: PCMCIA card inserted into slot 0 pcmcia: registering new device pcmcia0.0 PM: Adding info for pcmcia:0.0 pcmcia: request for exclusive IRQ could not be fulfilled. pcmcia: the driver needs updating to supported shared IRQ lines. eth1: Hardware identity 0005:0002:0001:0002 eth1: Station identity 001f:0001:0008:0048 eth1: Firmware determined as Lucent/Agere 8.72 eth1: Ad-hoc demo mode supported eth1: IEEE standard IBSS ad-hoc mode supported eth1: WEP supported, 104-bit key eth1: MAC address 00:02:2D:25:7E:6C eth1: Station name "HERMES I" eth1: ready eth1: orinoco_cs at 0.0, irq 10, io 0x3040-0x307f e100 0000:01:08.0: resuming PM: Writing back config space on device 0000:01:08.0 at offset 1 (was 2900113, writing 2900117) yenta_cardbus 0000:01:0f.0: resuming PM: Writing back config space on device 0000:01:0f.0 at offset f (was 180010b, writing 580010b) PM: Writing back config space on device 0000:01:0f.0 at offset 3 (was 824000, writing 82a800) Yenta O2: res at 0x94/0xD4: e8/00 Yenta O2: enabling read prefetch/write burst yenta_cardbus 0000:01:0f.1: resuming PM: Writing back config space on device 0000:01:0f.1 at offset f (was 180010b, writing 580010b) PM: Writing back config space on device 0000:01:0f.1 at offset 3 (was 824000, writing 82a800) pccard: PCMCIA card inserted into slot 2 pcmcia: registering new device pcmcia2.0 PM: Adding info for pcmcia:2.0 pnp 00:00: resuming system 00:01: resuming system 00:02: resuming pnp 00:03: resuming pnp 00:04: resuming pnp 00:05: resuming pnp 00:06: resuming i8042 kbd 00:07: resuming pnp: Device 00:07 does not support activation. i8042 aux 00:08: resuming pnp: Device 00:08 does not support activation. pnp 00:09: resuming pnp 00:0a: resuming pnp 00:0b: resuming pcspkr pcspkr: resuming fb0: PM: resume from 0, parent 0000:00:02.0 still 1 sd 0:0:0:0: resuming ata1: soft resetting port sr 1:0:0:0: resuming ata2: soft resetting port i8042 i8042: resuming atkbd serio0: resuming serio serio1: resuming serio serio2: resuming serio serio3: resuming psmouse serio4: resuming ata1.00: configured for UDMA/100 ata1: EH complete SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: configured for UDMA/33 ata2: EH complete usb usb1: resuming usb usb1: usb resume usb usb1: finish resume hub 1-0:1.0: hub_resume usb usb1: wakeup_rh usb usb2: resuming usb usb2: usb resume usb usb2: finish resume hub 2-0:1.0: hub_resume usb usb2: wakeup_rh wistron-bios wistron-bios: resuming ac97 0-0:ALC200,200P: resuming Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 done. ADDRCONF(NETDEV_UP): eth2: link is not ready usb usb1: suspend_rh (auto-stop) usb usb2: suspend_rh (auto-stop) hub 1-0:1.0: hub_suspend usb usb1: suspend_rh usb usb1: usb auto-suspend hub 2-0:1.0: hub_suspend usb usb2: suspend_rh usb usb2: usb auto-suspend PM: Preparing system for standby sleep Stopping tasks ... done. Suspending console(s) ac97 0-0:ALC200,200P: suspend wistron-bios wistron-bios: suspend usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2 hub 2-0:1.0: PM: suspend 2-->2 hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2 usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2 usb usb2: PM: suspend 2-->2 usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2 hub 1-0:1.0: PM: suspend 2-->2 hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2 usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2 usb usb1: PM: suspend 2-->2 i8042 i8042: suspend sr 1:0:0:0: suspend sd 0:0:0:0: suspend fb0: PM: suspend 0->2, parent 0000:00:02.0 already 1 pcspkr pcspkr: suspend pnp 00:0b: suspend pnp 00:0a: suspend pnp 00:09: suspend i8042 aux 00:08: suspend i8042 kbd 00:07: suspend pnp 00:06: suspend pnp 00:05: suspend pnp 00:04: suspend pnp 00:03: suspend system 00:02: suspend system 00:01: suspend pnp 00:00: suspend pcmcia 2.0: suspend yenta_cardbus 0000:01:0f.1: suspend yenta_cardbus 0000:01:0f.0: suspend e100 0000:01:08.0: suspend orinoco_cs 0.0: suspend yenta_cardbus 0000:01:06.0: suspend pci 0000:00:1f.6: suspend Intel ICH 0000:00:1f.5: suspend ACPI: PCI interrupt for device 0000:00:1f.5 disabled uhci_hcd 0000:00:1f.4: suspend uhci_hcd 0000:00:1f.4: uhci_suspend ACPI: PCI interrupt for device 0000:00:1f.4 disabled uhci_hcd 0000:00:1f.4: --> PCI D0/legacy pci 0000:00:1f.3: suspend uhci_hcd 0000:00:1f.2: suspend uhci_hcd 0000:00:1f.2: uhci_suspend ACPI: PCI interrupt for device 0000:00:1f.2 disabled uhci_hcd 0000:00:1f.2: --> PCI D0/legacy ata_piix 0000:00:1f.1: suspend pci_set_power_state(): 0000:00:1f.1: state=3, current state=5 pci 0000:00:1f.0: suspend pci 0000:00:1e.0: suspend i810fb 0000:00:02.0: PM: suspend 1-->2 agpgart-intel 0000:00:00.0: suspend acpi acpi: suspend PM: Entering standby sleep wistron-bios wistron-bios: LATE suspend i8042 i8042: LATE suspend pcspkr pcspkr: LATE suspend yenta_cardbus 0000:01:0f.1: LATE suspend yenta_cardbus 0000:01:0f.0: LATE suspend e100 0000:01:08.0: LATE suspend yenta_cardbus 0000:01:06.0: LATE suspend pci 0000:00:1f.6: LATE suspend Intel ICH 0000:00:1f.5: LATE suspend pci 0000:00:1f.3: LATE suspend pci 0000:00:1f.0: LATE suspend pci 0000:00:1e.0: LATE suspend agpgart-intel 0000:00:00.0: LATE suspend Back to C! agpgart-intel 0000:00:00.0: EARLY resume i810fb 0000:00:02.0: EARLY resume pci 0000:00:1e.0: EARLY resume pci 0000:00:1f.0: EARLY resume ata_piix 0000:00:1f.1: EARLY resume uhci_hcd 0000:00:1f.2: EARLY resume pci 0000:00:1f.3: EARLY resume uhci_hcd 0000:00:1f.4: EARLY resume Intel ICH 0000:00:1f.5: EARLY resume pci 0000:00:1f.6: EARLY resume yenta_cardbus 0000:01:06.0: EARLY resume e100 0000:01:08.0: EARLY resume yenta_cardbus 0000:01:0f.0: EARLY resume yenta_cardbus 0000:01:0f.1: EARLY resume pcspkr pcspkr: EARLY resume i8042 i8042: EARLY resume wistron-bios wistron-bios: EARLY resume PM: Finishing wakeup. acpi acpi: resuming agpgart-intel 0000:00:00.0: resuming PM: Writing back config space on device 0000:00:02.0 at offset f (was 100, writing 0) PM: Writing back config space on device 0000:00:02.0 at offset d (was dc, writing 0) PM: Writing back config space on device 0000:00:02.0 at offset b (was 10161025, writing 0) PM: Writing back config space on device 0000:00:02.0 at offset 4 (was 8, writing 0) PM: Writing back config space on device 0000:00:02.0 at offset 2 (was 3000011, writing 0) PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 2b00004, writing 0) PM: Writing back config space on device 0000:00:02.0 at offset 0 (was 11328086, writing 0) agpgart: detected 4MB dedicated video ram. pci 0000:00:1e.0: resuming PCI: Setting latency timer of device 0000:00:1e.0 to 64 pci 0000:00:1f.0: resuming ata_piix 0000:00:1f.1: resuming PCI: Setting latency timer of device 0000:00:1f.1 to 64 uhci_hcd 0000:00:1f.2: resuming uhci_hcd 0000:00:1f.2: PCI legacy resume ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: uhci_resume pci 0000:00:1f.3: resuming uhci_hcd 0000:00:1f.4: resuming uhci_hcd 0000:00:1f.4: PCI legacy resume ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: uhci_resume uhci_hcd 0000:00:1f.4: uhci_check_and_reset_hc: legsup = 0x2f00 uhci_hcd 0000:00:1f.4: Performing full reset usb usb2: root hub lost power or was reset usb usb2: suspend_rh Intel ICH 0000:00:1f.5: resuming ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.5 to 64 pci 0000:00:1f.6: resuming yenta_cardbus 0000:01:06.0: resuming orinoco_cs 0.0: resuming e100 0000:01:08.0: resuming PM: Writing back config space on device 0000:01:08.0 at offset f (was 38080100, writing 3808010b) PM: Writing back config space on device 0000:01:08.0 at offset 5 (was 1, writing 3001) PM: Writing back config space on device 0000:01:08.0 at offset 4 (was 0, writing f4100000) PM: Writing back config space on device 0000:01:08.0 at offset 3 (was 0, writing 4208) PM: Writing back config space on device 0000:01:08.0 at offset 1 (was 2900000, writing 2900117) yenta_cardbus 0000:01:0f.0: resuming Yenta O2: res at 0x94/0xD4: ea/00 Yenta O2: enabling read prefetch/write burst yenta_cardbus 0000:01:0f.1: resuming eth2: New link status: Connected (0001) ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready pcmcia 2.0: resuming pnp 00:00: resuming system 00:01: resuming system 00:02: resuming pnp 00:03: resuming pnp 00:04: resuming pnp 00:05: resuming pnp 00:06: resuming i8042 kbd 00:07: resuming pnp: Device 00:07 does not support activation. i8042 aux 00:08: resuming pnp: Device 00:08 does not support activation. pnp 00:09: resuming pnp 00:0a: resuming pnp 00:0b: resuming pcspkr pcspkr: resuming fb0: PM: resume from 0, parent 0000:00:02.0 still 1 sd 0:0:0:0: resuming ata1: soft resetting port sr 1:0:0:0: resuming ata2: soft resetting port i8042 i8042: resuming atkbd serio0: resuming serio serio1: resuming serio serio2: resuming serio serio3: resuming psmouse serio4: resuming ata2.00: configured for UDMA/33 ata2: EH complete usbdev1.1_ep00: PM: resume from 0, parent usb1 still 2 usbdev1.1_ep81: PM: resume from 0, parent 1-0:1.0 still 2 usb usb2: resuming usb usb2: usb resume usb usb2: finish resume hub 2-0:1.0: hub_resume usb usb2: wakeup_rh wistron-bios wistron-bios: resuming ac97 0-0:ALC200,200P: resuming Restarting tasks ... <7>hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 done. ata1.00: configured for UDMA/100 ata1: EH complete SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA input: AT Translated Set 2 keyboard as /class/input/input7 Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0 usb usb2: suspend_rh (auto-stop) input: SynPS/2 Synaptics TouchPad as /class/input/input8 hub 2-0:1.0: hub_suspend usb usb2: suspend_rh usb usb2: usb auto-suspend eth2: New link status: AP Out of Range (0004) eth2: no IPv6 routers present eth2: New link status: AP In Range (0005) --------------000803070300060305050707-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/