Messages in this thread | | | Date | Thu, 22 Feb 2007 09:41:25 -0500 | From | Mark Lord <> | Subject | Re: [PATCH] libata: add NCQ blacklist entries from Silicon Image Windows driver |
| |
Jens Axboe wrote: >> Robert Hancock wrote: >.. >>> + /* The following blacklist entries are taken from the Windows >>> + driver .inf files for the Silicon Image 3124 and 3132. */ >>> + { "Maxtor 7B250S0", "BANC1B70", ATA_HORKAGE_NONCQ, }, >>> + { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, >>> + { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, }, >>> + { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, }, >> Do we have information that these drives fail on non-SiI controllers? >> >> Sometimes the problem can be related to a single family of controllers. > > I don't know about the Hitachi's, but the Maxtor with that firmware is > definitely broken. It _appeared_ to work if the depth was limited to 4, > but I didn't test it long enough to be absolutely certain. So the safest > is indeed to blacklist it.
Yes, broken on the Silicon Image controllers for sure. But what type of controller did you observe the failures on, Jens ? - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |