lkml.org 
[lkml]   [2007]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: SATA problems
Marcus Haebler wrote:
> thanks for the patches! I am on an Intel P965/ICH8R.

I see. That can happen too. There was a race window where in-flight
r/w command which left SCSI midlayer but pending on libata gets executed
in the wrong mode. If possible, please verify that it doesn't happen
with the patches applied. I'm attaching combined patch against v2.6.20.

Thanks.

--
tejun
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 667acd2..348cc02 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -308,9 +308,7 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf->flags |= tf_flags;

- if ((dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ_OFF |
- ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ &&
- likely(tag != ATA_TAG_INTERNAL)) {
+ if (ata_ncq_enabled(dev) && likely(tag != ATA_TAG_INTERNAL)) {
/* yay, NCQ */
if (!lba_48_ok(block, n_block))
return -ERANGE;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 73902d3..ebb9185 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -945,29 +945,32 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev;
unsigned long flags;
- int max_depth;

- if (queue_depth < 1)
+ if (queue_depth < 1 || queue_depth == sdev->queue_depth)
return sdev->queue_depth;

dev = ata_scsi_find_dev(ap, sdev);
if (!dev || !ata_dev_enabled(dev))
return sdev->queue_depth;

- max_depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id));
- max_depth = min(ATA_MAX_QUEUE - 1, max_depth);
- if (queue_depth > max_depth)
- queue_depth = max_depth;
-
- scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth);
-
+ /* NCQ enabled? */
spin_lock_irqsave(ap->lock, flags);
- if (queue_depth > 1)
- dev->flags &= ~ATA_DFLAG_NCQ_OFF;
- else
+ dev->flags &= ~ATA_DFLAG_NCQ_OFF;
+ if (queue_depth == 1 || !ata_ncq_enabled(dev)) {
dev->flags |= ATA_DFLAG_NCQ_OFF;
+ queue_depth = 1;
+ }
spin_unlock_irqrestore(ap->lock, flags);

+ /* limit and apply queue depth */
+ queue_depth = min(queue_depth, sdev->host->can_queue);
+ queue_depth = min(queue_depth, ata_id_queue_depth(dev->id));
+ queue_depth = min(queue_depth, ATA_MAX_QUEUE - 1);
+
+ if (sdev->queue_depth == queue_depth)
+ return -EINVAL;
+
+ scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth);
return queue_depth;
}

@@ -1454,11 +1457,9 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
static int ata_scmd_need_defer(struct ata_device *dev, int is_io)
{
struct ata_port *ap = dev->ap;
+ int is_ncq = is_io && ata_ncq_enabled(dev);

- if (!(dev->flags & ATA_DFLAG_NCQ))
- return 0;
-
- if (is_io) {
+ if (is_ncq) {
if (!ata_tag_valid(ap->active_tag))
return 0;
} else {
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 91bb8ce..4e4e365 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1035,6 +1035,21 @@ static inline u8 ata_chk_status(struct ata_port *ap)
return ap->ops->check_status(ap);
}

+/**
+ * ata_ncq_enabled - Test whether NCQ is enabled
+ * @dev: ATA device to test for
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * 1 if NCQ is enabled for @dev, 0 otherwise.
+ */
+static inline int ata_ncq_enabled(struct ata_device *dev)
+{
+ return (dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ_OFF |
+ ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ;
+}

/**
* ata_pause - Flush writes and pause 400 nanoseconds.
\
 
 \ /
  Last update: 2007-02-21 04:59    [W:0.198 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site