Messages in this thread | | | Subject | Re: PCI riser cards and PCI irq routing, etc | From | Krzysztof Halasa <> | Date | Mon, 19 Feb 2007 21:37:00 +0100 |
| |
Udo van den Heuvel <udovdh@xs4all.nl> writes:
> At the bottom I added a dmesg output of the kernel after boot. > I more or less know that irq 20 for the DVB-S card (saa7146 (1)) is > 'working'. I know that irq 16 for saa7146 (0) (DVB-T) is not working for > i2c although the card does work perfectly for DVB-T reception (picture, > low CPU load, etc) with only reception as the bottleneck.
BTW: Can you check which device # and IRQ does the card get if plugged directly into the PCI slot on board (without the riser)?
Is it a VIA ITX board? I think I have VIA's riser card somewhere, could check what it does. -- Krzysztof Halasa - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |