lkml.org 
[lkml]   [2007]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectPCI riser cards and PCI irq routing, etc
Hello,

Is there some howto information available about using PCI riser cards
(with multiple PCI slots) under Linux?
Several incarnations exist of PCI riser cards with two PCI slots where
the Device Number of one slot can be changed.
How, based on what information, does Linux assign an IRQ to each card,
plugged into the riser?
How can one tweak/influence the irq routing?
How can I make a dual riser card work so that both cards have a working
interrupt?
Or if stuff should work all by itself, what could be wrong?

Kind regards,
Udo
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-02-18 15:11    [W:0.098 / U:16.176 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site