lkml.org 
[lkml]   [2007]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: 2.6.24-rc4-mm1: hostbyte=0x01 driverbyte=0x00 (now bisected)
Alexey Dobriyan wrote:
>> git-scsi-misc.patch
>
> Apologies for not looking into the problem earlier. See
> http://marc.info/?t=119628022300005&r=1&w=2
> "2.6.24-rc3-mm2: Result: hostbyte=0x01 driverbyte=0x00\nend_request: I/O error"
> for previous installment.
>
> I've bisected it to the following patch in git-scsi-misc branch.
> Revert on top of 2.6.24-rc4-mm1 also helps.
>
> commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
> Author: Hannes Reinecke <hare@suse.de>
> Date: Tue Nov 6 09:23:40 2007 +0100
>
> [SCSI] Do not requeue requests if REQ_FAILFAST is set
>
> Any requests with the REQ_FAILFAST flag set should not be requeued
> to the requeust queue, but rather terminated directly.
> Otherwise the multipath failover will stall until the command
> timeout triggers.
>
> Signed-off-by: Hannes Reinecke <hare@suse.de>
> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
>
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index 0f44bdb..0da0dd0 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -1286,6 +1286,11 @@ int scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
> */
> if (!(req->cmd_flags & REQ_PREEMPT))
> ret = BLKPREP_DEFER;
> + /*
> + * Return failfast requests immediately
> + */
> + if (req->cmd_flags & REQ_FAILFAST)
> + ret = BLKPREP_KILL;
> break;
> default:
> /*
> @@ -1414,6 +1419,17 @@ static inline int scsi_host_queue_ready(struct request_queue *q,
> return 1;
> }
>
> +static void __scsi_kill_request(struct request *req)
> +{
> + struct scsi_cmnd *cmd = req->special;
> + struct scsi_device *sdev = cmd->device;
> +
> + cmd->result = DID_NO_CONNECT << 16;
> + atomic_inc(&cmd->device->iorequest_cnt);
> + sdev->device_busy--;
> + __scsi_done(cmd);
> +}
> +
> /*
> * Kill a request for a dead device
> */
> @@ -1527,8 +1543,16 @@ static void scsi_request_fn(struct request_queue *q)
> * accept it.
> */
> req = elv_next_request(q);
> - if (!req || !scsi_dev_queue_ready(q, sdev))
> + if (!req)
> + break;
> +
> + if (!scsi_dev_queue_ready(q, sdev)) {
> + if (req->cmd_flags & REQ_FAILFAST) {
> + scsi_kill_request(req, q);
> + continue;
> + }
> break;
> + }
>
> if (unlikely(!scsi_device_online(sdev))) {
> sdev_printk(KERN_ERR, sdev,
> @@ -1609,8 +1633,12 @@ static void scsi_request_fn(struct request_queue *q)
> * later time.
> */
> spin_lock_irq(q->queue_lock);
> - blk_requeue_request(q, req);
> - sdev->device_busy--;
> + if (unlikely(req->cmd_flags & REQ_FAILFAST))
> + __scsi_kill_request(req);
> + else {
> + blk_requeue_request(q, req);
> + sdev->device_busy--;
> + }
> if(sdev->device_busy == 0)
> blk_plug_device(q);
> out:
Yeah, sorry. That patch was bad. Please use the attached one instead.
Andrew, can you replace them?

Cheers,

Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Markus Rex, HRB 16746 (AG Nürnberg)
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 13e7e09..9ec1566 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1284,13 +1284,15 @@ int scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
/*
* If the devices is blocked we defer normal commands.
*/
- if (!(req->cmd_flags & REQ_PREEMPT))
- ret = BLKPREP_DEFER;
- /*
- * Return failfast requests immediately
- */
- if (req->cmd_flags & REQ_FAILFAST)
- ret = BLKPREP_KILL;
+ if (!(req->cmd_flags & REQ_PREEMPT)) {
+ /*
+ * Return failfast requests immediately
+ */
+ if (req->cmd_flags & REQ_FAILFAST)
+ ret = BLKPREP_KILL;
+ else
+ ret = BLKPREP_DEFER;
+ }
break;
default:
/*
\
 
 \ /
  Last update: 2007-12-06 09:33    [W:0.427 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site