Alan Cox wrote:
>> On my NV3 board with a Samsung SP1634N Harddisk I wrongly got
>> "drive side 80-wire cable detection failed" with the current kernel.
> 
> Does the drive cable detect correctly on a non Nvidia chipset ?
> 
I have no box here to test this - my laptop won't help.

But I did another test:

I replaced the 80-wire cable with a 40-wire cable. Then the BIOS warns 
about "no 80-wire cable connected". The kernel boot and seems to enable 
UDMA100 which leads to some BadCRC errors. After that the drive is in 
udma3-mode(hdparm) IIRC but not in udma5, as when using the right cable.

Maybe it's not that clever to add the drive to the ivb_list?

As far as I understood it, pata_acpi should fix the problem, but I'm not 
sure on the required configuration. Do I have to disable the normal 
IDE-support? How 'experimental' is the PATA support?


   Tobias
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/