lkml.org 
[lkml]   [2007]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.24-rc3-mm1: usb mouse doesn't work
On [Wed, 21.11.2007 14:22], Andrew Morton wrote:
> On Wed, 21 Nov 2007 20:23:46 +0200
> "Kirill A. Shutemov" <k.shutemov@velesys.com> wrote:
>
> > USB mouse(Logitech M-BT58) doesn't work. TouchPad works.
> > dmesg after rmmod usbcore && modprobe uhci_hcd:
> >
> > usbcore: registered new interface driver usbfs
> > usbcore: registered new interface driver hub
> > usbcore: registered new device driver usb
> > USB Universal Host Controller Interface driver v3.0
> > ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKE] -> GSI 10 (level, low)
> > -> IRQ 10
> > PCI: Setting latency timer of device 0000:00:1d.0 to 64
> > uhci_hcd 0000:00:1d.0: UHCI Host Controller
> > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
> > uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000bf80
> > usb usb1: configuration #1 chosen from 1 choice
> > hub 1-0:1.0: USB hub found
> > hub 1-0:1.0: 2 ports detected
> > usb usb1: new device found, idVendor=0000, idProduct=0000
> > usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
> > usb usb1: Product: UHCI Host Controller
> > usb usb1: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
> > usb usb1: SerialNumber: 0000:00:1d.0
> > ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKF] -> GSI 11 (level, low)
> > -> IRQ 11
> > PCI: Setting latency timer of device 0000:00:1d.1 to 64
> > uhci_hcd 0000:00:1d.1: UHCI Host Controller
> > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
> > uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf60
> > usb usb2: configuration #1 chosen from 1 choice
> > hub 2-0:1.0: USB hub found
> > hub 2-0:1.0: 2 ports detected
> > usb usb2: new device found, idVendor=0000, idProduct=0000
> > usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
> > usb usb2: Product: UHCI Host Controller
> > usb usb2: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
> > usb usb2: SerialNumber: 0000:00:1d.1
> > ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKG] -> GSI 9 (level, low)
> > -> IRQ 9
> > PCI: Setting latency timer of device 0000:00:1d.2 to 64
> > uhci_hcd 0000:00:1d.2: UHCI Host Controller
> > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
> > uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000bf40
> > usb usb3: configuration #1 chosen from 1 choice
> > hub 3-0:1.0: USB hub found
> > hub 3-0:1.0: 2 ports detected
> > usb usb3: new device found, idVendor=0000, idProduct=0000
> > usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
> > usb usb3: Product: UHCI Host Controller
> > usb usb3: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
> > usb usb3: SerialNumber: 0000:00:1d.2
> > ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKH] -> GSI 7 (level, low)
> > -> IRQ 7
> > PCI: Setting latency timer of device 0000:00:1d.3 to 64
> > uhci_hcd 0000:00:1d.3: UHCI Host Controller
> > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
> > uhci_hcd 0000:00:1d.3: irq 7, io base 0x0000bf20
> > usb usb4: configuration #1 chosen from 1 choice
> > hub 4-0:1.0: USB hub found
> > hub 4-0:1.0: 2 ports detected
> > usb usb4: new device found, idVendor=0000, idProduct=0000
> > usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
> > usb usb4: Product: UHCI Host Controller
> > usb usb4: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
> > usb usb4: SerialNumber: 0000:00:1d.3
> > uhci_hcd 0000:00:1d.3: FGR not stopped yet!
> >
>
> I've had some strangenesses with USB lately. Sometimes running `lsusb'
> makes the USB system notice a newly attached device.

No. But I have new messages in dmesg:

uhci_hcd 0000:00:1d.3: FGR not stopped yet!
uhci_hcd 0000:00:1d.2: FGR not stopped yet!
uhci_hcd 0000:00:1d.1: FGR not stopped yet!
uhci_hcd 0000:00:1d.0: FGR not stopped yet!


> Is that "FGR not stopped yet!" messgae new behaviour?

It is a new message since 2.6.24-rc3. I have never try -mm tree before.

--
Regards, Kirill A. Shutemov
+ Belarus, Minsk
+ Velesys LLC, http://www.velesys.com/
+ ALT Linux Team, http://www.altlinux.com/
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2007-11-22 11:19    [W:0.155 / U:7.400 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site