lkml.org 
[lkml]   [2007]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [patch 5/8] Immediate Values - x86 Optimization (update 2)
Mathieu Desnoyers wrote:
> Immediate Values - x86 Optimization
>
> x86 optimization of the immediate values which uses a movl with code patching
> to set/unset the value used to populate the register used as variable source.
>
> Changelog:
> - Use text_poke_early with cr0 WP save/restore to patch the bypass. We are doing
> non atomic writes to a code region only touched by us (nobody can execute it
> since we are protected by the immediate_mutex).
> - Put immediate_set and _immediate_set in the architecture independent header.
> - Use $0 instead of %2 with (0) operand.
> - Add x86_64 support, ready for i386+x86_64 -> x86 merge.
> - Use asm-x86/asm.h.
>
> Ok, so the most flexible solution that I see, that should fit for both
> i386 and x86_64 would be :
> 1 byte : "=Q" : Any register accessible as rh: a, b, c, and d.
> 2, 4 bytes : "=R" : Legacy register—the eight integer registers available
> on all i386 processors (a, b, c, d, si, di, bp, sp). 8
> bytes : (only for x86_64)
> "=r" : A register operand is allowed provided that it is in a
> general register.
> That should make sure x86_64 won't try to use REX prefixed opcodes for
> 1, 2 and 4 bytes values.
>

I just had a couple of utterly sick ideas.

Consider this variant (this example is for a 32-bit immediate on x86-64,
but the obvious macroizations apply):

.section __discard,"a",@progbits
1: movl $0x12345678,%r9d
2:
.previous

.section __immediate,"a",@progbits
.quad foo_immediate, (3f)-4, 4
.previous

.org . + ((-.-(2b-1b)) & 3), 0x90
movl $0x12345678,%r9d
3:


The idea is that the instruction is emitted into a section, which is
marked DISCARD in the linker script. That lets us actually measure the
length, and since we know the immediate is always at the end of the
instruction... done!

-hpa

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-11-14 04:05    [W:0.099 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site