lkml.org 
[lkml]   [2007]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subject2.6.23-rc9-git4: pata_pcmcia, disabling IRQ #9
    Hello,

    Latest git, insert a CF card into cardbus slot gives:

    pccard: PCMCIA card inserted into slot 0
    cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
    cs: memory probe 0x60000000-0x60ffffff: clean.
    cs: memory probe 0xa0000000-0xa0ffffff: clean.
    cs: memory probe 0xdea00000-0xdeafffff: excluding 0xdea00000-0xdeafffff
    cs: memory probe 0xff600000-0xff6fffff: excluding 0xff600000-0xff60ffff 0xff6a0000-0xff6dffff 0xff6f0000-0xff6fffff
    pcmcia: registering new device pcmcia0.0
    irq 9: nobody cared (try booting with the "irqpoll" option)
    [<c01041f2>] show_trace_log_lvl+0x1a/0x2f
    [<c01042ed>] show_trace+0x12/0x14
    [<c0104ea0>] dump_stack+0x15/0x17
    [<c0133b48>] __report_bad_irq+0x39/0x79
    [<c0133d80>] note_interrupt+0x1f8/0x234
    [<c0134527>] handle_level_irq+0x8e/0xd1
    [<c0105a6d>] do_IRQ+0x92/0xad
    [<c0103f57>] common_interrupt+0x23/0x28
    [<c0134513>] handle_level_irq+0x7a/0xd1
    [<c0105a5e>] do_IRQ+0x83/0xad
    =======================
    handlers:
    [<c02a8a38>] (acpi_irq+0x0/0x18)
    [<c03268e0>] (yenta_interrupt+0x0/0xb7)
    [<c032b1d7>] (usb_hcd_irq+0x0/0x51)
    [<c032b1d7>] (usb_hcd_irq+0x0/0x51)
    [<c032b1d7>] (usb_hcd_irq+0x0/0x51)
    [<c037c08c>] (snd_intel8x0_interrupt+0x0/0x1e8)
    [<c02eeaff>] (e1000_intr+0x0/0xeb)
    Disabling IRQ #9
    scsi2 : pata_pcmcia
    ata3: PATA max PIO0 cmd 0x0001d100 ctl 0x0001d10e bmdma 0x00000000 irq 9
    ata3.00: qc timeout (cmd 0x91)
    ata3.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x4)

    However, if I rename pata_pcmcia.ko so that udev cannot autoload it, insert the
    card and manually load pata_pcmcia.ko it works:

    pccard: PCMCIA card inserted into slot 0
    cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
    cs: memory probe 0x60000000-0x60ffffff: clean.
    cs: memory probe 0xa0000000-0xa0ffffff: clean.
    cs: memory probe 0xdea00000-0xdeafffff: excluding 0xdea00000-0xdeafffff
    cs: memory probe 0xff600000-0xff6fffff: excluding 0xff600000-0xff60ffff 0xff6a0000-0xff6dffff 0xff6f0000-0xff6fffff
    pcmcia: registering new device pcmcia0.0

    # insmod pata_pcmcia.ko

    scsi2 : pata_pcmcia
    ata3: PATA max PIO0 cmd 0x0001d100 ctl 0x0001d10e bmdma 0x00000000 irq 9
    ata3.00: CFA: , verB2.10, max PIO2
    ata3.00: 507904 sectors, multi 0: LBA
    ata3.00: configured for PIO0
    scsi 2:0:0:0: Direct-Access ATA verB PQ: 0 ANSI: 5
    sd 2:0:0:0: [sdb] 507904 512-byte hardware sectors (260 MB)
    sd 2:0:0:0: [sdb] Write Protect is off
    sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    sd 2:0:0:0: [sdb] 507904 512-byte hardware sectors (260 MB)
    sd 2:0:0:0: [sdb] Write Protect is off
    sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    sdb: sdb1
    sd 2:0:0:0: [sdb] Attached SCSI removable disk
    sd 2:0:0:0: Attached scsi generic sg2 type 0


    System is a Vaio with ICH4 and TI PCI7420 Cardbus bridge.
    If you need more info, please don't hesitate to ask.

    Thank you,
    Manuel Lauss
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2007-10-05 20:19    [W:0.024 / U:150.324 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site