lkml.org 
[lkml]   [2007]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 07/14] Blackfin SPI driver: Add SPI master controller platform device 1
Date
On Tuesday 30 October 2007, Bryan Wu wrote:
> From: Sonic Zhang <sonic.zhang@analog.com>
>
> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
> Signed-off-by: Bryan Wu <bryan.wu@analog.com>

The patch comments in this series leave a bit to be desired,
especially patches from Sonic. (Several are like this one:
just a $SUBJECT, no description.) I've improved them in the
versions I'll be sending on ...

It's worth noting that in this case the $SUBJECT doesn't
relate *at all* to what this patch actually does! Namely,
it uses the portmux mechanism to add support for two more
SPI buses ... it doesn't add a platform device.

- Dave

> ---
> drivers/spi/spi_bfin5xx.c | 52 ++++++++++++++++++++++++++------------------
> 1 files changed, 31 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
> index 3f3630c..3bd8359 100644
> --- a/drivers/spi/spi_bfin5xx.c
> +++ b/drivers/spi/spi_bfin5xx.c
> @@ -209,17 +209,26 @@ static void cs_deactive(struct chip_data *chip)
> write_FLAG(flag);
> }
>
> -#define MAX_SPI0_SSEL 7
> +#define MAX_SPI_SSEL 7
>
> /* stop controller and re-config current chip*/
> static int restore_state(struct driver_data *drv_data)
> {
> struct chip_data *chip = drv_data->cur_chip;
> int ret = 0;
> - u16 ssel[MAX_SPI0_SSEL] = {P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3,
> - P_SPI0_SSEL4, P_SPI0_SSEL5,
> - P_SPI0_SSEL6, P_SPI0_SSEL7,};
> -
> + u16 ssel[3][MAX_SPI_SSEL] = {
> + {P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3,
> + P_SPI0_SSEL4, P_SPI0_SSEL5,
> + P_SPI0_SSEL6, P_SPI0_SSEL7},
> +
> + {P_SPI1_SSEL1, P_SPI1_SSEL2, P_SPI1_SSEL3,
> + P_SPI1_SSEL4, P_SPI1_SSEL5,
> + P_SPI1_SSEL6, P_SPI1_SSEL7},
> +
> + {P_SPI2_SSEL1, P_SPI2_SSEL2, P_SPI2_SSEL3,
> + P_SPI2_SSEL4, P_SPI2_SSEL5,
> + P_SPI2_SSEL6, P_SPI2_SSEL7},
> + };
> /* Clear status and disable clock */
> write_STAT(BIT_STAT_CLR);
> bfin_spi_disable(drv_data);
> @@ -234,9 +243,9 @@ static int restore_state(struct driver_data *drv_data)
> int i = chip->chip_select_num;
>
> dev_dbg(&drv_data->pdev->dev, "chip select number is %d\n", i);
> -
> - if ((i > 0) && (i <= MAX_SPI0_SSEL))
> - ret = peripheral_request(ssel[i-1], DRV_NAME);
> + if ((i > 0) && (i <= MAX_SPI_SSEL))
> + ret = peripheral_request(
> + ssel[drv_data->master->bus_num][i-1], DRV_NAME);
>
> chip->chip_select_requested = 1;
> }
> @@ -329,7 +338,6 @@ static void u8_reader(struct driver_data *drv_data)
> write_TDBR(0xFFFF);
>
> dummy_read();
> -
> while (drv_data->rx < drv_data->rx_end - 1) {
> while (!(read_STAT() & BIT_STAT_RXS))
> continue;
> @@ -640,7 +648,6 @@ static void pump_transfers(unsigned long data)
> message = drv_data->cur_msg;
> transfer = drv_data->cur_transfer;
> chip = drv_data->cur_chip;
> -
> /*
> * if msg is error or done, report it back using complete() callback
> */
> @@ -1202,17 +1209,20 @@ static inline int destroy_queue(struct driver_data *drv_data)
> return 0;
> }
>
> -static int setup_pin_mux(int action)
> +static int setup_pin_mux(int action, int bus_num)
> {
>
> - u16 pin_req[] = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0};
> + u16 pin_req[3][4] = {
> + {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
> + {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
> + {P_SPI2_SCK, P_SPI2_MISO, P_SPI2_MOSI, 0},
> + };
>
> if (action) {
> - if (peripheral_request_list(pin_req, DRV_NAME)) {
> + if (peripheral_request_list(pin_req[bus_num], DRV_NAME))
> return -EFAULT;
> - }
> } else {
> - peripheral_free_list(pin_req);
> + peripheral_free_list(pin_req[bus_num]);
> }
>
> return 0;
> @@ -1236,11 +1246,6 @@ static int __init bfin5xx_spi_probe(struct platform_device *pdev)
> return -ENOMEM;
> }
>
> - if (setup_pin_mux(1)) {
> - dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
> - goto out_error;
> - }
> -
> drv_data = spi_master_get_devdata(master);
> drv_data->master = master;
> drv_data->master_info = platform_info;
> @@ -1295,6 +1300,11 @@ static int __init bfin5xx_spi_probe(struct platform_device *pdev)
> goto out_error_queue_alloc;
> }
>
> + if (setup_pin_mux(1, master->bus_num)) {
> + dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
> + goto out_error;
> + }
> +
> dev_info(dev, "%s, Version %s, regs_base @ 0x%08x\n",
> DRV_DESC, DRV_VERSION, spi_regs_base);
> return status;
> @@ -1337,7 +1347,7 @@ static int __devexit bfin5xx_spi_remove(struct platform_device *pdev)
> /* Disconnect from the SPI framework */
> spi_unregister_master(drv_data->master);
>
> - setup_pin_mux(0);
> + setup_pin_mux(0, drv_data->master->bus_num);
>
> /* Prevent double remove */
> platform_set_drvdata(pdev, NULL);
> --
> 1.5.3.4
>


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-10-30 20:11    [from the cache]
©2003-2011 Jasper Spaans