[lkml]   [2007]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: [RFC: 2.6 patch] remove the USB_STORAGE_ONETOUCH driver
    On 10/29/07, Dmitry Torokhov <> wrote:
    > On Sunday 28 October 2007 16:39, Jiri Kosina wrote:
    > > On Sun, 28 Oct 2007, Torsten Kaiser wrote:
    > >
    > > > But it looks like that uses another driver:
    > > > hiddev0hidraw1: USB HID v1.10 Device [Western Digital External HDD] on
    > > > usb-0000:00:02.1-5.2
    > > > Otherwise I would be willing to try to test this, if someone would tell
    > > > me how to check that the second commit did fix the suspend problem.
    > Maybe onetouch driver is not needed after all. I wonder what key/button does
    > HID deriver reports when it binds to it... Torsten, could you please post
    > your /proc/bus/input/devices?

    I only read the mail from Adrian, because I was 100% sure that my
    device is such a Maxtor Onetouch, because it's a external HDD and has
    buttons. (I even compiled this driver into my kernel when it was
    But after finding these two git commits and starting to write my
    initial mail I looked for the exact name of my device and found that
    this is not a Maxtor at all but a Western Digital.
    So I'm rather unsure if this driver will work for me...

    Anyway here is my /proc/bus/input/devices:
    I: Bus=0019 Vendor=0000 Product=0002 Version=0000
    N: Name="Power Button (FF)"
    P: Phys=LNXPWRBN/button/input0
    S: Sysfs=/devices/virtual/input/input0
    U: Uniq=
    H: Handlers=kbd event0
    B: EV=3
    B: KEY=10000000000000 0

    I: Bus=0019 Vendor=0000 Product=0001 Version=0000
    N: Name="Power Button (CM)"
    P: Phys=PNP0C0C/button/input0
    S: Sysfs=/devices/virtual/input/input1
    U: Uniq=
    H: Handlers=kbd event1
    B: EV=3
    B: KEY=10000000000000 0

    I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
    N: Name="AT Translated Set 2 keyboard"
    P: Phys=isa0060/serio0/input0
    S: Sysfs=/devices/platform/i8042/serio0/input/input2
    U: Uniq=
    H: Handlers=kbd event2
    B: EV=120013
    B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
    B: MSC=10
    B: LED=7

    I: Bus=0010 Vendor=001f Product=0001 Version=0100
    N: Name="PC Speaker"
    P: Phys=isa0061/input0
    S: Sysfs=/devices/platform/pcspkr/input/input3
    U: Uniq=
    H: Handlers=kbd event3
    B: EV=40001
    B: SND=6

    I: Bus=0003 Vendor=062a Product=0000 Version=0110
    N: Name="HID 062a:0000"
    P: Phys=usb-0000:00:02.0-9/input0
    S: Sysfs=/devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input4
    U: Uniq=
    H: Handlers=mouse0 event4
    B: EV=17
    B: KEY=70000 0 0 0 0
    B: REL=103
    B: MSC=10

    The button part of the device is visible in sysfs under bus/usb, but
    not under class/input:
    (There is also a cardreader, a hub and the hdd visible under
    /sys/bus/usb/devices/1-5 )

    |-- driver -> ../../../../../../../bus/usb/drivers/usbhid
    |-- ep_81 -> ../../../../../../../devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5.2/1-5.2:1.1/usb_endpoint/usbdev1.5_ep81
    |-- subsystem -> ../../../../../../../bus/usb
    |-- usb
    | `-- hiddev0
    | |-- device ->
    | `-- subsystem -> ../../../../../../../../../class/usb
    `-- usb_endpoint
    `-- usbdev1.5_ep81
    |-- device ->
    `-- subsystem -> ../../../../../../../../../class/usb_endpoint

    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2007-10-29 07:03    [W:0.025 / U:6.568 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site