lkml.org 
[lkml]   [2007]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    SubjectRe: [2.624-rc1 regression] lost battery information
    Andrey Borzenkov wrote:
    > I have lost battery in 2.6.24-rc1. Without CONFIG_ACPI_PROCFS I have
    > no /proc/acpi/battery and cannot test netlink interface because right now
    > there is no consumer of this.
    for /sysfs interface you need to enable power_supply driver.
    or you could apply this patch and power_supply will be selected by battery itself.
    >
    > With CONFIG_ACPI_PROCFS I get
    >
    > {pts/1}% LC_ALL=C ll /proc/acpi/battery/BAT1
    > total 0
    > -rw-r--r-- 1 root root 0 Oct 26 20:18 alarm
    > -r--r--r-- 1 root root 0 Oct 26 20:18 info
    > -r--r--r-- 1 root root 0 Oct 26 20:18 state
    > {pts/1}% LC_ALL=C cat /proc/acpi/battery/BAT1/*
    > cat: /proc/acpi/battery/BAT1/alarm: Bad address
    > cat: /proc/acpi/battery/BAT1/info: Bad address
    > cat: /proc/acpi/battery/BAT1/state: Bad address
    Could you make sure it's a clean build with all drivers updated/kernel included?
    > {pts/1}% LC_ALL=C ll /proc/acpi/battery/BAT2
    > total 0
    > -rw-r--r-- 1 root root 0 Oct 26 20:18 alarm
    > -r--r--r-- 1 root root 0 Oct 26 20:18 info
    > -r--r--r-- 1 root root 0 Oct 26 20:18 state
    > {pts/1}% LC_ALL=C cat /proc/acpi/battery/BAT2/*
    > present: no
    > present: no
    > present: no
    >
    > BAT2 is correct - it is not present. BAT1 is lying. There is nothing in dmesg.
    > battery is loaded (obviously)
    >
    > ACPI related stuff from dmesg:
    >
    > {pts/1}% dmesg |grep ACPI
    > [ 0.000000] BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
    > [ 0.000000] BIOS-e820: 000000001ef60000 - 000000001ef70000 (ACPI data)
    > [ 0.000000] ACPI: RSDP 000F0090, 0014 (r0 TOSHIB)
    > [ 0.000000] ACPI: RSDT 1EF60000, 0028 (r1 TOSHIB 750 970814 TASM
    > 4010000)
    > [ 0.000000] ACPI: FACP 1EF60054, 0084 (r2 TOSHIB 750 970814 TASM
    > 4010000)
    > [ 0.000000] ACPI: DSDT 1EF600D8, 68DA (r1 TOSHIB 4000 20020417 MSFT
    > 100000A)
    > [ 0.000000] ACPI: FACS 000EEE00, 0040
    > [ 0.000000] ACPI: PM-Timer IO Port: 0xee08
    > [ 896.112009] ACPI: Core revision 20070126
    > [ 896.112775] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml
    > not found.
    > [ 896.123590] tbxface-0598 [00] tb_load_namespace : ACPI Tables
    > successfully acquired
    > [ 896.123631] ACPI: setting ELCR to 0200 (from 0a00)
    > [ 896.124208] evxfevnt-0091 [00] enable : Transition to ACPI
    > mode successful
    > [ 896.131744] ACPI: bus type pci registered
    > [ 896.149165] ACPI: EC: Look up EC in DSDT
    > [ 896.163343] ACPI: Interpreter enabled
    > [ 896.163362] ACPI: (supports S0 S3 S4 S5)
    > [ 896.163510] ACPI: Using PIC for interrupt routing
    > [ 896.195892] ACPI: PCI Root Bridge [PCI0] (0000:00)
    > [ 896.197650] PCI quirk: region ee00-ee3f claimed by ali7101 ACPI
    > [ 896.200015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    > [ 896.200588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    > [ 896.227797] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11)
    > [ 896.228562] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
    > [ 896.229271] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11)
    > [ 896.230101] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11)
    > [ 896.230818] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11)
    > [ 896.231527] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
    > [ 896.232912] ACPI: Power Resource [PFAN] (off)
    > [ 896.233622] pnp: PnP ACPI init
    > [ 896.233766] ACPI: bus type pnp registered
    > [ 896.257679] pnp: PnP ACPI: found 12 devices
    > [ 896.257737] ACPI: ACPI bus type pnp unregistered
    > [ 896.258820] PCI: Using ACPI for IRQ routing
    > [ 896.325763] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    > [ 896.325805] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 11
    > (level, low) -> IRQ 11
    > [ 896.327116] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    > [ 896.327143] ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11
    > (level, low) -> IRQ 11
    > [ 896.328392] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    > [ 896.328416] ACPI: PCI Interrupt 0000:00:11.1[B] -> Link [LNKB] -> GSI 11
    > (level, low) -> IRQ 11
    > [ 896.978962] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    > [ 896.980097] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 11
    > (level, low) -> IRQ 11
    > [ 902.378588] ACPI: Unable to derive IRQ for device 0000:00:04.0
    > [ 902.406719] ACPI: PCI Interrupt 0000:00:04.0[A]: no GSI
    > [ 919.051426] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
    > [ 919.051451] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKG] -> GSI 11
    > (level, low) -> IRQ 11
    > [ 920.132284] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
    > [ 920.132307] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 11
    > (level, low) -> IRQ 11
    > [ 927.120073] ACPI: AC Adapter [ADP1] (on-line)
    > [ 927.195942] ACPI: Battery Slot [BAT1] (battery present)
    > [ 927.200475] ACPI: Battery Slot [BAT2] (battery absent)
    > [ 927.277564] ACPI: Power Button (FF) [PWRF]
    > [ 927.290786] ACPI: Lid Switch [LID]
    > [ 927.324850] ACPI: Transitioning device [FAN] to D3
    > [ 927.324867] ACPI: Transitioning device [FAN] to D3
    > [ 927.324891] ACPI: Fan [FAN] (off)
    > [ 927.535960] ACPI: CPU0 (power states: C1[C1] C2[C2])
    > [ 927.638487] ACPI: Thermal Zone [THRM] (55 C)
    > [ 927.770100] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18
    > [ 927.920519] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
    > [ 1055.552624] ACPI: PCI interrupt for device 0000:00:0a.0 disabled
    > [ 1055.554812] ACPI: PCI interrupt for device 0000:00:06.0 disabled
    > [ 1055.555479] ACPI: PCI interrupt for device 0000:00:02.0 disabled
    > [ 0.901020] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKG] -> GSI 11
    > (level, low) -> IRQ 11
    > [ 0.901271] ACPI: Unable to derive IRQ for device 0000:00:04.0
    > [ 0.901278] ACPI: PCI Interrupt 0000:00:04.0[A]: no GSI
    > [ 0.904594] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 11
    > (level, low) -> IRQ 11
    >
    >
    > As for the case without ACPI_PROCFS ... well, I do not have it in /proc -
    > which is expected - but neither I do have it in /sys. And Kconfig help reads
    >
    > The deprecated files (and their replacements) include:
    >
    > /proc/acpi/sleep (/sys/power/state)
    > /proc/acpi/info (/sys/modules/acpi/parameters/acpica_version)
    > /proc/acpi/dsdt (/sys/firmware/acpi/tables/DSDT)
    > /proc/acpi/fadt (/sys/firmware/acpi/tables/FACP)
    > /proc/acpi/debug_layer (/sys/module/acpi/parameters/debug_layer)
    > /proc/acpi/debug_level (/sys/module/acpi/parameters/debug_level)
    >
    > neither does it mention /proc/acpi/battery not do I actually have any battery
    > information in /sys.
    >
    > Personally I do not like it (if it is intentional). Leaving only netlink
    > interface means user has no way to query for actual state. We need something
    > running all the time and hope, it never loses any event and thus reflects
    > actual state. But it also means we are not allowed to restart it (whatever it
    > is) as it will have no way to query for actual state on restart ...
    >
    > -andrey

    ACPI: use select POWER_SUPPLY for AC, BATTERY and SBS

    From: Alexey Starikovskiy <astarikovskiy@suse.de>

    POWER_SUPPLY is needed for AC, battery, and SBS sysfs support.
    Use 'select' instead of 'depends on', as it is will not be selected
    by anything else, leading to confusion.

    Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
    ---

    drivers/acpi/Kconfig | 8 +++++---
    1 files changed, 5 insertions(+), 3 deletions(-)

    diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
    index 5d0e26a..ecd87d7 100644
    --- a/drivers/acpi/Kconfig
    +++ b/drivers/acpi/Kconfig
    @@ -88,7 +88,8 @@ config ACPI_PROC_EVENT

    config ACPI_AC
    tristate "AC Adapter"
    - depends on X86 && POWER_SUPPLY
    + depends on X86
    + select POWER_SUPPLY
    default y
    help
    This driver adds support for the AC Adapter object, which indicates
    @@ -97,7 +98,8 @@ config ACPI_AC

    config ACPI_BATTERY
    tristate "Battery"
    - depends on X86 && POWER_SUPPLY
    + depends on X86
    + select POWER_SUPPLY
    default y
    help
    This driver adds support for battery information through
    @@ -352,7 +354,7 @@ config ACPI_HOTPLUG_MEMORY
    config ACPI_SBS
    tristate "Smart Battery System"
    depends on X86
    - depends on POWER_SUPPLY
    + select POWER_SUPPLY
    help
    This driver adds support for the Smart Battery System, another
    type of access to battery information, found on some laptops.
    \
     
     \ /
      Last update: 2007-10-26 18:59    [W:3.323 / U:23.916 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site