lkml.org 
[lkml]   [2007]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: 2.6.23-rc9 boot failure (megaraid?)
From
Date
On Tue, 02 Oct 2007 15:38:13 -0500
James Bottomley <James.Bottomley@SteelEye.com> wrote:

> On Tue, 2007-10-02 at 20:15 +0200, Adrian Bunk wrote:
> > Cc's added, the complete bug report is at
> > http://lkml.org/lkml/2007/10/2/243
> >
> > On Tue, Oct 02, 2007 at 12:48:26PM -0400, Burton Windle wrote:
> > > 2.6.23-rc9 fails to boot for me; 2.6.22.9 works fine.
> > >
> > > System is a Dell Poweredge with PERC 2/DC with RAID1 volume.
> > >...
> >
> > Thanks for your report.
> >
> > Diff'ing the dmesg's shows:
> >
> > <-- snip -->
> >
> > scsi0: scanning scsi channel 4 [P0] for physical devices.
> > scsi0: scanning scsi channel 5 [P1] for physical devices.
> > st: Version 20070203, fixed bufsize 32768, s/g segs 256
> > -sd 0:0:0:0: [sda] 17547264 512-byte hardware sectors (8984 MB)
> > +sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
> > +sd 0:0:0:0: [sda] 1 512-byte hardware sectors (0 MB)
> > sd 0:0:0:0: [sda] Write Protect is off
> > sd 0:0:0:0: [sda] Asking for cache data failed
> > sd 0:0:0:0: [sda] Assuming drive cache: write through
> > -sd 0:0:0:0: [sda] 17547264 512-byte hardware sectors (8984 MB)
> > +sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
> > +sd 0:0:0:0: [sda] 1 512-byte hardware sectors (0 MB)
> > sd 0:0:0:0: [sda] Write Protect is off
> > sd 0:0:0:0: [sda] Asking for cache data failed
> > sd 0:0:0:0: [sda] Assuming drive cache: write through
> > sda: sda1
> > + sda: p1 exceeds device capacity
> >
> > <-- snip -->
> >
> > - case MEGA_BULK_DATA:
> > - if (scb->cmd->use_sg == 0)
> > - length = scb->cmd->request_bufflen;
> > - else {
> > - struct scatterlist *sgl =
> > - (struct scatterlist *)scb->cmd->request_buffer;
> > - length = sgl->length;
> > - }
> > - pci_unmap_page(adapter->dev, scb->dma_h_bulkdata,
> > - length, scb->dma_direction);
> > - break;
> > -
>
> This is the problem piece I think. We've reintroduced a very old bug:
>
> commit 51c928c34fa7cff38df584ad01de988805877dba
> Author: James Bottomley <James.Bottomley@SteelEye.com>
> Date: Sat Oct 1 09:38:05 2005 -0500
>
> [SCSI] Legacy MegaRAID: Fix READ CAPACITY
>
> Some Legacy megaraid cards can't actually cope with the scatter/gather
> version of the READ CAPACITY command (which is what we now send them
> since altering all SCSI internal I/O to go via the block layer). Fix
> this (and a few other broken megaraid driver assumptions) by sending
> the non-sg version of the command if the sg list only has a single
> element.
>
> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
>
> So what we have to do is put back the check for use_sg == 1 and send
> that as a bulk transfer command.

Sorry again. Needs to check sg count before dma mapping.


diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 3907f67..ae0b220 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -1737,9 +1737,12 @@ mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buf, u32 *len)
Scsi_Cmnd *cmd;
int sgcnt;
int idx;
+ int bulkdata;

cmd = scb->cmd;

+ bulkdata = (scsi_sg_count(cmd) == 1) ? 1 : 0;
+
/*
* Copy Scatter-Gather list info into controller structure.
*
@@ -1753,6 +1756,14 @@ mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buf, u32 *len)

*len = 0;

+ if (bulkdata && !adapter->has_64bit_addr) {
+ sg = scsi_sglist(cmd);
+ scb->dma_h_bulkdata = sg_dma_address(sg);
+ *buf = (u32)scb->dma_h_bulkdata;
+ *len = sg_dma_len(sg);
+ return 0;
+ }
+
scsi_for_each_sg(cmd, sg, sgcnt, idx) {
if (adapter->has_64bit_addr) {
scb->sgl64[idx].address = sg_dma_address(sg);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2007-10-03 02:13    [W:0.466 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site