lkml.org 
[lkml]   [2007]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 3/5] i386: paravirt boot sequence
From
Date
This patch uses the updated boot protocol to do paravirtualized boot.
If the boot version is >= 2.07, then it will do two things:

1. Check the bootparams loadflags to see if we should reload the
segment registers and clear interrupts. This is appropriate
for normal native boot and some paravirtualized environments, but
inapproprate for others.

2. Check the hardware architecture, and dispatch to the appropriate
kernel entrypoint. If the bootloader doesn't set this, then we
simply do the normal boot sequence.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
---
arch/i386/boot/compressed/head.S | 14 +++++++++--
arch/i386/boot/compressed/misc.c | 4 +++
arch/i386/boot/header.S | 7 ++++-
arch/i386/kernel/head.S | 47 ++++++++++++++++++++++++++++++++++----
4 files changed, 65 insertions(+), 7 deletions(-)

diff -r 5d471e4c931d arch/i386/boot/compressed/head.S
--- a/arch/i386/boot/compressed/head.S Tue Oct 02 22:13:34 2007 +1000
+++ b/arch/i386/boot/compressed/head.S Tue Oct 02 22:20:25 2007 +1000
@@ -27,19 +27,30 @@
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/boot.h>
+#include <asm/asm-offsets.h>

.section ".text.head","ax",@progbits
.globl startup_32

startup_32:
- cld
- cli
+ /* check to see if KEEP_SEGMENTS flag is meaningful */
+ cmpw $0x207, BP_version(%esi)
+ jb 1f
+
+ /* test KEEP_SEGMENTS flag to see if the bootloader is asking
+ * us to not reload segments */
+ testb $(1<<6), BP_loadflags(%esi)
+ jnz 2f
+
+1: cli
movl $(__BOOT_DS),%eax
movl %eax,%ds
movl %eax,%es
movl %eax,%fs
movl %eax,%gs
movl %eax,%ss
+
+2: cld

/* Calculate the delta between where we were compiled to run
* at and where we were actually loaded at. This can only be done
diff -r 5d471e4c931d arch/i386/boot/compressed/misc.c
--- a/arch/i386/boot/compressed/misc.c Tue Oct 02 22:13:34 2007 +1000
+++ b/arch/i386/boot/compressed/misc.c Tue Oct 02 22:13:34 2007 +1000
@@ -246,6 +246,9 @@ static void putstr(const char *s)
{
int x,y,pos;
char c;
+
+ if (RM_SCREEN_INFO.orig_video_mode == 0 && lines == 0 && cols == 0)
+ return;

x = RM_SCREEN_INFO.orig_x;
y = RM_SCREEN_INFO.orig_y;
diff -r 5d471e4c931d arch/i386/boot/header.S
--- a/arch/i386/boot/header.S Tue Oct 02 22:13:34 2007 +1000
+++ b/arch/i386/boot/header.S Tue Oct 02 22:13:34 2007 +1000
@@ -119,7 +119,7 @@ 1:
# Part 2 of the header, from the old setup.S

.ascii "HdrS" # header signature
- .word 0x0206 # header version number (>= 0x0105)
+ .word 0x0207 # header version number (>= 0x0105)
# or else old loadlin-1.5 will fail)
.globl realmode_swtch
realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
@@ -214,6 +214,11 @@ cmdline_size: .long COMMAND_LINE_SIZ
#added with boot protocol
#version 2.06

+hardware_subarch: .long 0 # subarchitecture, added with 2.07
+ # default to 0 for normal x86 PC
+
+hardware_subarch_data: .quad 0
+
# End of setup header #####################################################

.section ".inittext", "ax"
diff -r 5d471e4c931d arch/i386/kernel/head.S
--- a/arch/i386/kernel/head.S Tue Oct 02 22:13:34 2007 +1000
+++ b/arch/i386/kernel/head.S Tue Oct 02 22:21:01 2007 +1000
@@ -70,22 +70,30 @@ INIT_MAP_BEYOND_END = BOOTBITMAP_SIZE +
*/
.section .text.head,"ax",@progbits
ENTRY(startup_32)
+ /* check to see if KEEP_SEGMENTS flag is meaningful */
+ cmpw $0x207, BP_version(%esi)
+ jb 1f
+
+ /* test KEEP_SEGMENTS flag to see if the bootloader is asking
+ us to not reload segments */
+ testb $(1<<6), BP_loadflags(%esi)
+ jnz 2f

/*
* Set segments to known values.
*/
- cld
- lgdt boot_gdt_descr - __PAGE_OFFSET
+1: lgdt boot_gdt_descr - __PAGE_OFFSET
movl $(__BOOT_DS),%eax
movl %eax,%ds
movl %eax,%es
movl %eax,%fs
movl %eax,%gs
+2:

/*
* Clear BSS first so that there are no surprises...
- * No need to cld as DF is already clear from cld above...
- */
+ */
+ cld
xorl %eax,%eax
movl $__bss_start - __PAGE_OFFSET,%edi
movl $__bss_stop - __PAGE_OFFSET,%ecx
@@ -119,6 +127,35 @@ 2:
movsl
1:

+#ifdef CONFIG_PARAVIRT
+ cmpw $0x207, (boot_params + BP_version - __PAGE_OFFSET)
+ jb default_entry
+
+ /* Paravirt-compatible boot parameters. Look to see what architecture
+ we're booting under. */
+ movl (boot_params + BP_hardware_subarch - __PAGE_OFFSET), %eax
+ cmpl $num_subarch_entries, %eax
+ jae bad_subarch
+
+ movl subarch_entries - __PAGE_OFFSET(,%eax,4), %eax
+ subl $__PAGE_OFFSET, %eax
+ jmp *%eax
+
+bad_subarch:
+WEAK(lguest_entry)
+WEAK(xen_entry)
+ /* Unknown implementation; there's really
+ nothing we can do at this point. */
+ ud2a
+.data
+subarch_entries:
+ .long default_entry /* normal x86/PC */
+ .long lguest_entry /* lguest hypervisor */
+ .long xen_entry /* Xen hypervisor */
+num_subarch_entries = (. - subarch_entries) / 4
+.previous
+#endif /* CONFIG_PARAVIRT */
+
/*
* Initialize page tables. This creates a PDE and a set of page
* tables, which are located immediately beyond _end. The variable
@@ -131,6 +168,7 @@ 1:
*/
page_pde_offset = (__PAGE_OFFSET >> 20);

+default_entry:
movl $(pg0 - __PAGE_OFFSET), %edi
movl $(swapper_pg_dir - __PAGE_OFFSET), %edx
movl $0x007, %eax /* 0x007 = PRESENT+RW+USER */

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-10-03 01:39    [W:0.050 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site