lkml.org 
[lkml]   [2007]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: JMicron JMB363 SATA hard disk appears twice (sda + hdg)
> jmicron: don't touch the controller when it's AHCI mode. As help text
> suggests ("For full support use the libata drivers") the new libata AHCI
> driver will take care of it.

NAK

The kernel drivers work on the basis that if you are using drivers/ide
then the IDE driver will grab all the ports, if you are using libata then
the PCI boot quirks will switch to split AHCI and PATA mode and the
libata drivers will take both.

If you build both IDE and libata support for the same hardware into your
kernel it should generally end up with only one driver claiming the
hardware but the AHCI case doesn't handle this in 2.6.18.

Alan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-01-06 20:27    [W:0.630 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site