Messages in this thread | | | Date | Fri, 05 Jan 2007 09:09:53 +0000 | From | Sid Boyce <> | Subject | Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64 |
| |
Len Brown wrote: >> ..same problem with 2.6.20-rc3. Last worked with >> 2.6.19-rc6-git12, so it was 2.6.19 where it failed. >> > > > >> Attaching both case1 normal, case2 acpi=noirq. With acpi=noirq ethernet >> doesn't get configured, route -n says it's an Unsupported operation, >> ifconfig only shows for localhost, ifconfig eth0 192.168.10.5 also >> complains of a config error. >> > > It seems that the "acpi=noirq" (and probably also the acpi=off) case > is simply an additional broken case, not a success case to compare to. > > The thing we really want to compare is dmesg and /proc/interrupts > from 2.6.19-rc6-git12, and the broken current release. > Perhaps you can put that info in the bug report when you file it. > > thanks, > -Len > > > > 2.6.19-rc6-git12 fails in exactly the same way, from /var/log/messages it seems 2.6.19-rc6 19/11/06 first saw the problem, details later when I boot 2.6.19-rc5. If I boot an affected kernel with the SuSEfirewall2 enabled and then stop the firewall, the problems goes away. Regards Sid.
-- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |