lkml.org 
[lkml]   [2007]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject2.6.20-rc6-mm[2-3] ACPI issues
Hi Len,

On 2.6.20-rc6-mm2 my rx2600 wouldn't boot unless I reverted all changes
to drivers/acpi/tables.c. Nearly all major early boot detected ACPI tables
weren't discovered. I never had time to resolve because 2.6.20-rc6-mm3
showed up. The -mm2 problem appears corrected but the machine now crashes in
acpi_init for -mm3. 2.6.20-rc6 and 2.6.20-rc6-mm3 boot logs are included
at end of email.

For 2.6.20-rc6-mm3 the HP internal simualtor for a NUMA machine is
getting a preposterous pxm value and subsequently MCAs in pxm_to_node
because of large pxm. It seems like table parsing is being done
incorrectly.

Nope this is the issue:

Index: linux-2.6.20-rc6-mm3/include/acpi/actbl1.h
===================================================================
--- linux-2.6.20-rc6-mm3.orig/include/acpi/actbl1.h 2007-01-30 09:27:44.000000000 -0500
+++ linux-2.6.20-rc6-mm3/include/acpi/actbl1.h 2007-01-31 14:41:32.000000000 -0500
@@ -654,8 +654,8 @@ struct acpi_srat_cpu_affinity {

struct acpi_srat_mem_affinity {
struct acpi_subtable_header header;
- u32 proximity_domain;
- u16 reserved; /* Reserved, must be zero */
+ u8 proximity_domain;
+ u8 reserved[5]; /* Reserved, must be zero */
u64 base_address;
u64 length;
u32 memory_type; /* See acpi_address_range_id */
Index: linux-2.6.20-rc6-mm3/arch/ia64/kernel/acpi.c
===================================================================
--- linux-2.6.20-rc6-mm3.orig/arch/ia64/kernel/acpi.c 2007-01-30 13:55:08.000000000 -0500
+++ linux-2.6.20-rc6-mm3/arch/ia64/kernel/acpi.c 2007-01-31 14:49:26.000000000 -0500
@@ -423,7 +423,7 @@ int get_memory_proximity_domain(struct a

pxm = ma->proximity_domain;
if (ia64_platform_is("sn2"))
- pxm += ma->reserved << 8;
+ pxm += ma->reserved[0] << 8;

return pxm;
}
I doubt you'll want to apply this patch. It appears HP firmware has some
of the reserved field not initialized to zero. This results in the huge
pxm. Was the pxm size expanded with a recent ACPI spec revision?

Well with this patch I can pursue the acpi_init panic on simulator.

rx2600 (2 CPU MP) and NUMA simulator (1 node and 4 cpus) boot successfully
on 2.6.20-rc6.

bob


Linux version 2.6.20-rc6 (root@localhost) (gcc version 3.4.1) #1 SMP Mon Jan 29 14:40:17 EST 2007
EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI 2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP=0x3fb2c000
PCDP: v0 at 0x3fb2c000
Early serial console at MMIO 0xf8030000 (options '9600n8')
ACPI: RSDP (v002 HP ) @ 0x000000003fb2e000
ACPI: XSDT (v001 HP rx2600 0x00000000 HP 0x00000000) @ 0x000000003fb2e02c
ACPI: FADT (v003 HP rx2600 0x00000000 HP 0x00000000) @ 0x000000003fb369e0
ACPI: SPCR (v001 HP rx2600 0x00000000 HP 0x00000000) @ 0x000000003fb36b18
ACPI: DBGP (v001 HP rx2600 0x00000000 HP 0x00000000) @ 0x000000003fb36b68
ACPI: MADT (v001 HP rx2600 0x00000000 HP 0x00000000) @ 0x000000003fb36c28
ACPI: SPMI (v004 HP rx2600 0x00000000 HP 0x00000000) @ 0x000000003fb36ba0
ACPI: CPEP (v001 HP rx2600 0x00000000 HP 0x00000000) @ 0x000000003fb36bf0
ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb33870
ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb33a50
ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb33da0
ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb347c0
ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb351e0
ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb35c00
ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb36620
ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb36800
ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb368f0
ACPI: DSDT (v001 HP rx2600 0x00000007 INTL 0x02012044) @ 0x0000000000000000
SAL 3.1: HP version 2.21
SAL Platform features: None
SAL: AP wakeup using external interrupt vector 0xff
No logical to physical processor mapping available
ACPI: Local APIC address c0000000fee00000
GSI 36 (level, low) -> CPU 0 (0x0000) vector 48
2 CPUs available, 2 CPUs total
MCA related initialization done
Entering add_active_range(0, 1025, 4096) 0 entries of 12800 used
Entering add_active_range(0, 4825, 64889) 1 entries of 12800 used
Entering add_active_range(0, 65216, 65227) 2 entries of 12800 used
Entering add_active_range(0, 16842752, 17038305) 3 entries of 12800 used
Entering add_active_range(0, 17038307, 17038312) 4 entries of 12800 used
Entering add_active_range(0, 17038313, 17039193) 5 entries of 12800 used
Entering add_active_range(0, 17039209, 17039236) 6 entries of 12800 used
Entering add_active_range(0, 17039264, 17039343) 7 entries of 12800 used
Zone PFN ranges:
DMA 1025 -> 262144
Normal 262144 -> 17039360
early_node_map[8] active PFN ranges
0: 1025 -> 4096
0: 4825 -> 64889
0: 65216 -> 65227
0: 16842752 -> 17038305
0: 17038307 -> 17038312
0: 17038313 -> 17039193
0: 17039209 -> 17039236
0: 17039264 -> 17039343
On node 0 totalpages: 259690
DMA zone: 892 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 62254 pages, LIFO batch:7
Normal zone: 57343 pages used for memmap
Normal zone: 139201 pages, LIFO batch:7
Built 1 zonelists. Total pages: 201455
Kernel command line: BOOT_IMAGE=scsi0:/EFI/debian/boot/vmlinux-2.6.20-rc6 root=/dev/sda3 installtype=DebianInstall raid=noautodetect console=hcdp devfs=nomount nohalt kgdb8250=mmio,0x0000000ff5e2000,115200,51 debug loglevel=9 ro
PID hash table entries: 4096 (order: 12, 32768 bytes)
CPU 0: base freq=200.000MHz, ITC ratio=10/2, ITC freq=1000.000MHz+/-500ppm
Console: colour VGA+ 80x25
Memory: 4137744k/4155040k available (8022k code, 29008k reserved, 3225k data, 720k init)
Leaving McKinley Errata 9 workaround enabled
Calibrating delay loop... 1499.13 BogoMIPS (lpj=2998272)
Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes)
Mount-cache hash table entries: 1024
ACPI: Core revision 20060707
Boot processor id 0x0/0x0
CPU 1: synchronized ITC with CPU 0 (last diff -4 cycles, maxerr 454 cycles)
CPU 1: base freq=200.000MHz, ITC ratio=10/2, ITC freq=1000.000MHz+/-500ppm
Calibrating delay loop... 1499.13 BogoMIPS (lpj=2998272)
Brought up 2 CPUs
Total of 2 processors activated (2998.27 BogoMIPS).
migration_cost=3270
DMI 2.3 present.
NET: Registered protocol family 16
ACPI: bus type pci registered
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Firmware left 0000:00:03.0 e100 interrupts enabled, disabling
ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI0._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:20)
ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI1._PRT]
ACPI: PCI Root Bridge [PCI2] (0000:40)
ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI2._PRT]
ACPI: PCI Root Bridge [PCI3] (0000:60)
ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI3._PRT]
ACPI: PCI Root Bridge [PCI4] (0000:80)
ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI4._PRT]
ACPI: PCI Root Bridge [PCI6] (0000:c0)
ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI6._PRT]
ACPI: PCI Root Bridge [PCI7] (0000:e0)
Boot video device is 0000:e0:02.0
ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI7._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
GSI 34 (edge, high) -> CPU 1 (0x0100) vector 49
GSI 35 (edge, high) -> CPU 0 (0x0000) vector 50
pnp: PnP ACPI: found 11 devices
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 6, 1048576 bytes)
TCP established hash table entries: 524288 (order: 9, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
perfmon: version 2.0 IRQ 238
perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
GSI 83 (level, low) -> CPU 1 (0x0100) vector 51
ACPI: PCI Interrupt 0000:e0:02.0[A] -> GSI 83 (level, low) -> IRQ 51
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=166.00 Mhz, System=166.00 MHz
radeonfb: PLL min 12000 max 35000
i2c_adapter i2c-1: unable to read EDID block.
i2c_adapter i2c-1: unable to read EDID block.
i2c_adapter i2c-1: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-2: unable to read EDID block.
i2c_adapter i2c-2: unable to read EDID block.
i2c_adapter i2c-2: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
radeonfb: Monitor 1 type CRT found
radeonfb: Monitor 2 type no found
Console: switching to colour frame buffer device 80x30
radeonfb (0000:e0:02.0): ATI Radeon QY
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (FF) as /class/input/input1
ACPI: Sleep Button (FF) [SLPF]
ACPI: Thermal Zone [THM0] (27 C)
EFI Time Services Driver v0.4
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.25.0 20060524 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
00:04: ttyS0 at MMIO 0xff5e0000 (irq = 49) is a 16550A
00:05: ttyS1 at MMIO 0xff5e2000 (irq = 50) is a 16550A
GSI 82 (level, low) -> CPU 0 (0x0000) vector 52
ACPI: PCI Interrupt 0000:e0:01.0[A] -> GSI 82 (level, low) -> IRQ 52
0000:e0:01.0: ttyS2 at MMIO 0xf8031000 (irq = 52) is a 16550A
ACPI: PCI Interrupt 0000:e0:01.1[A] -> GSI 82 (level, low) -> IRQ 52
0000:e0:01.1: ttyS3 at MMIO 0xf8030000 (irq = 52) is a 16550A
Couldn't register serial port 0000:e0:01.1: -28
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.3.15-k2
Copyright (c) 1999-2006 Intel Corporation.
Ethernet Channel Bonding Driver: v3.1.1 (September 26, 2006)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
GSI 20 (level, low) -> CPU 1 (0x0100) vector 53
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 53
eth0: OEM i82557/i82558 10/100 Ethernet, 00:30:6E:4A:53:34, IRQ 53.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
Secondary interface chip i82555.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0xb874c1d3).
tg3.c:v3.72 (January 8, 2007)
GSI 29 (level, low) -> CPU 0 (0x0000) vector 54
ACPI: PCI Interrupt 0000:20:02.0[A] -> GSI 29 (level, low) -> IRQ 54
eth1: Tigon3 [partno(BCM95700A6) rev 0105 PHY(5701)] (PCI:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:30:6e:4a:52:9a
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
eth1: dma_rwctrl[76ff2d0f] dma_mask[64-bit]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CMD649: IDE controller at PCI slot 0000:00:02.0
GSI 21 (level, low) -> CPU 1 (0x0100) vector 55
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 21 (level, low) -> IRQ 55
CMD649: chipset revision 2
CMD649: 100% native mode on irq 55
ide0: BM-DMA at 0x0d40-0x0d47, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x0d48-0x0d4f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: DW-224E, ATAPI CD/DVD-ROM drive
ide0 at 0xd58-0xd5f,0xd66 on irq 55
Probing IDE interface ide1...
hda: ATAPI 24X DVD-ROM CD-R/RW drive, 1658kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
st: Version 20061107, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Fusion MPT base driver 3.04.03
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.03
GSI 27 (level, low) -> CPU 0 (0x0000) vector 56
ACPI: PCI Interrupt 0000:20:01.0[A] -> GSI 27 (level, low) -> IRQ 56
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
scsi0 : ioc0: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=56
scsi 0:0:0:0: Direct-Access HP 36.4G ST336753LC HPC3 PQ: 0 ANSI: 3
target0:0:0: Beginning Domain Validation
target0:0:0: Ending Domain Validation
target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
SCSI device sda: 71132960 512-byte hdwr sectors (36420 MB)
sda: Write Protect is off
sda: Mode Sense: d3 00 10 08
SCSI device sda: write cache: disabled, read cache: enabled, supports DPO and FUA
SCSI device sda: 71132960 512-byte hdwr sectors (36420 MB)
sda: Write Protect is off
sda: Mode Sense: d3 00 10 08
SCSI device sda: write cache: disabled, read cache: enabled, supports DPO and FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Direct-Access HP 36.4G ST336753LC HPC3 PQ: 0 ANSI: 3
target0:0:1: Beginning Domain Validation
target0:0:1: Ending Domain Validation
target0:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
SCSI device sdb: 71132960 512-byte hdwr sectors (36420 MB)
sdb: Write Protect is off
sdb: Mode Sense: d3 00 10 08
SCSI device sdb: write cache: disabled, read cache: enabled, supports DPO and FUA
SCSI device sdb: 71132960 512-byte hdwr sectors (36420 MB)
sdb: Write Protect is off
sdb: Mode Sense: d3 00 10 08
SCSI device sdb: write cache: disabled, read cache: enabled, supports DPO and FUA
sdb: sdb1 sdb2 sdb3
sd 0:0:1:0: Attached scsi disk sdb
sd 0:0:1:0: Attached scsi generic sg1 type 0
GSI 28 (level, low) -> CPU 1 (0x0100) vector 57
ACPI: PCI Interrupt 0000:20:01.1[B] -> GSI 28 (level, low) -> IRQ 57
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator}
scsi1 : ioc1: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=57
GSI 18 (level, low) -> CPU 0 (0x0000) vector 58
ACPI: PCI Interrupt 0000:00:01.2[C] -> GSI 18 (level, low) -> IRQ 58
ehci_hcd 0000:00:01.2: EHCI Host Controller
ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:01.2: irq 58, io mem 0x80021000
ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
GSI 16 (level, low) -> CPU 1 (0x0100) vector 59
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 59
ohci_hcd 0000:00:01.0: OHCI Host Controller
ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:01.0: irq 59, io mem 0x80023000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
GSI 17 (level, low) -> CPU 0 (0x0000) vector 60
ACPI: PCI Interrupt 0000:00:01.1[B] -> GSI 17 (level, low) -> IRQ 60
ohci_hcd 0000:00:01.1: OHCI Host Controller
ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:01.1: irq 60, io mem 0x80022000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v3.0
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: multipath personality registered for level -4
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Adding console on ttyS3 at MMIO 0xf8030000 (options '9600n8')
md: Skipping autodetection of RAID arrays. (raid=noautodetect)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 720kB freed
EXT3 FS on sda3, internal journal
Adding 971744k swap on /dev/sda2. Priority:-1 extents:1 across:971744k

Linux version 2.6.20-rc6-mm3 (root@localhost) (gcc version 3.4.1) #2 SMP Tue Jan 30 09:51:25 EST 2007
EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI 2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP=0x3fb2c000
PCDP: v0 at 0x3fb2c000
Early serial console at MMIO 0xf8030000 (options '9600n8')
ACPI: RSDP @ 0x000000003fb2e000/0x0028 (v002 HP)
ACPI: XSDT @ 0x000000003fb2e02c/0x009C (v001 HP rx2600 0x00000000 HP 0x00000000)
ACPI: FACP @ 0x000000003fb369e0/0x00F4 (v003 HP rx2600 0x00000000 HP 0x00000000)
ACPI: DSDT @ 0x000000003fb2e0e0/0x5781 (v001 HP rx2600 0x00000007 INTL 0x02012044)
ACPI: FACS @ 0x000000003fb36ad8/0x0040
ACPI: SPCR @ 0x000000003fb36b18/0x0050 (v001 HP rx2600 0x00000000 HP 0x00000000)
ACPI: DBGP @ 0x000000003fb36b68/0x0034 (v001 HP rx2600 0x00000000 HP 0x00000000)
ACPI: APIC @ 0x000000003fb36c28/0x00C0 (v001 HP rx2600 0x00000000 HP 0x00000000)
ACPI: SPMI @ 0x000000003fb36ba0/0x0050 (v004 HP rx2600 0x00000000 HP 0x00000000)
ACPI: CPEP @ 0x000000003fb36bf0/0x0034 (v001 HP rx2600 0x00000000 HP 0x00000000)
ACPI: SSDT @ 0x000000003fb33870/0x01D6 (v001 HP rx2600 0x00000006 INTL 0x02012044)
ACPI: SSDT @ 0x000000003fb33a50/0x0342 (v001 HP rx2600 0x00000006 INTL 0x02012044)
ACPI: SSDT @ 0x000000003fb33da0/0x0A16 (v001 HP rx2600 0x00000006 INTL 0x02012044)
ACPI: SSDT @ 0x000000003fb347c0/0x0A16 (v001 HP rx2600 0x00000006 INTL 0x02012044)
ACPI: SSDT @ 0x000000003fb351e0/0x0A16 (v001 HP rx2600 0x00000006 INTL 0x02012044)
ACPI: SSDT @ 0x000000003fb35c00/0x0A16 (v001 HP rx2600 0x00000006 INTL 0x02012044)
ACPI: SSDT @ 0x000000003fb36620/0x01D8 (v001 HP rx2600 0x00000006 INTL 0x02012044)
ACPI: SSDT @ 0x000000003fb36800/0x00EB (v001 HP rx2600 0x00000006 INTL 0x02012044)
ACPI: SSDT @ 0x000000003fb368f0/0x00EF (v001 HP rx2600 0x00000006 INTL 0x02012044)
SAL 3.1: HP version 2.21
SAL Platform features: None
SAL: AP wakeup using external interrupt vector 0xff
No logical to physical processor mapping available
ACPI: Local APIC address c0000000fee00000
GSI 36 (level, low) -> CPU 0 (0x0000) vector 48
2 CPUs available, 2 CPUs total
MCA related initialization done
Zone PFN ranges:
DMA 1024 -> 262144
Normal 262144 -> 17039360
early_node_map[5] active PFN ranges
0: 1024 -> 64889
0: 65216 -> 65227
0: 16842752 -> 17039193
0: 17039209 -> 17039236
0: 17039264 -> 17039343
Built 1 zonelists. Total pages: 202188
Kernel command line: BOOT_IMAGE=scsi0:/EFI/debian/boot/vmlinux-2.6.20-rc6-mm3 root=/dev/sda3 installtype=DebianInstall raid=noautodetect console=hcdp devfs=nomount nohalt kgdb8250=mmio,0x0000000ff5e2000,115200,51 debug loglevel=9 ro
PID hash table entries: 4096 (order: 12, 32768 bytes)
CPU 0: base freq=200.000MHz, ITC ratio=10/2, ITC freq=1000.000MHz+/-500ppm
Console: colour VGA+ 80x25
Memory: 4137488k/4154784k available (8153k code, 29280k reserved, 3330k data, 736k init)
Leaving McKinley Errata 9 workaround enabled
Calibrating delay loop... 1499.13 BogoMIPS (lpj=2998272)
Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes)
Mount-cache hash table entries: 1024
ACPI: Core revision 20070126
Boot processor id 0x0/0x0
CPU 1: synchronized ITC with CPU 0 (last diff -19 cycles, maxerr 464 cycles)
CPU 1: base freq=200.000MHz, ITC ratio=10/2, ITC freq=1000.000MHz+/-500ppm
Calibrating delay loop... 1499.13 BogoMIPS (lpj=2998272)
Brought up 2 CPUs
Total of 2 processors activated (2998.27 BogoMIPS).
migration_cost=3267
DMI 2.3 present.
NET: Registered protocol family 16
ACPI: bus type pci registered
Unable to handle kernel paging request at virtual address 00000000005c100a
swapper[1]: Oops 8813272891392 [1]
Pid: 1, CPU 0, comm: swapper
psr : 00001010085a2010 ifs : 8000000000000309 ip : [<a0000001003b2980>] Not tainted
ip is at acpi_os_read_port+0x1a0/0x2e0
unat: 0000000000000000 pfs : 000000000000030a rsc : 0000000000000003
rnat: 0000000000000000 bsps: 0000000000000000 pr : 0000000000011961
ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a74433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a0000001003d5090 b6 : a0000001003d5250 b7 : a00000010000a880
f6 : 1003e0000000000000000 f7 : 1003e20c49ba5e353f7cf
f8 : 1003e0000000000000000 f9 : 1003e0000000000000338
f10 : 1003e0000000000000c48 f11 : 1003e431bde82d7b634db
r1 : a000000100d18ac0 r2 : e0000040fedbfdb7 r3 : e0000040fedbfdb6
r8 : e0000040fedbfdb5 r9 : e0000040fedbfdb4 r10 : e0000040fedbfdb3
r11 : e0000040fedbfdb2 r12 : e0000040fedbfd90 r13 : e0000040fedb8000
r14 : e0000040fedbfda0 r15 : 00000000005c100a r16 : 0000000000000000
r17 : 000000000000005c r18 : 00000000000000ff r19 : 0000000000000000
r20 : 0000000000000000 r21 : a000000100b7aef4 r22 : 00000000005c100a
r23 : 0000000000000000 r24 : a000000100b3c0b0 r25 : 00000000005c100a
r26 : 0000000000000000 r27 : a000000100b3c0b8 r28 : 0000000000ffffff
r29 : a000000100b3b0c0 r30 : 00000000000000ff r31 : a000000100b3b0c0
Call Trace:
[<a000000100010470>] show_stack+0x50/0xa0
sp=e0000040fedbf940 bsp=e0000040fedb8e80
[<a000000100010d30>] show_regs+0x810/0x840
sp=e0000040fedbfb10 bsp=e0000040fedb8e38
[<a000000100032d10>] die+0x1d0/0x2c0
sp=e0000040fedbfb10 bsp=e0000040fedb8de8
[<a000000100051360>] ia64_do_page_fault+0x840/0x940
sp=e0000040fedbfb30 bsp=e0000040fedb8d88
[<a00000010000b060>] ia64_leave_kernel+0x0/0x280
sp=e0000040fedbfbc0 bsp=e0000040fedb8d88
[<a0000001003b2980>] acpi_os_read_port+0x1a0/0x2e0
sp=e0000040fedbfd90 bsp=e0000040fedb8d40
[<a0000001003d5090>] acpi_hw_low_level_read+0x190/0x200
sp=e0000040fedbfda0 bsp=e0000040fedb8d10
[<a0000001003d5270>] acpi_hw_register_read+0x170/0x400
sp=e0000040fedbfdb0 bsp=e0000040fedb8cc8
[<a0000001003d5d40>] acpi_set_register+0xc0/0x340
sp=e0000040fedbfdc0 bsp=e0000040fedb8c90
[<a0000001003be900>] acpi_ev_initialize_events+0x80/0x180
sp=e0000040fedbfdd0 bsp=e0000040fedb8c68
[<a0000001003ecfb0>] acpi_enable_subsystem+0xf0/0x180
sp=e0000040fedbfdd0 bsp=e0000040fedb8c38
[<a0000001009bdbc0>] acpi_init+0x80/0x460
sp=e0000040fedbfdd0 bsp=e0000040fedb8c10
[<a00000010098d520>] init+0x400/0x660
sp=e0000040fedbfe00 bsp=e0000040fedb8bc8
[<a000000100012450>] kernel_thread_helper+0x30/0x60
sp=e0000040fedbfe30 bsp=e0000040fedb8ba0
[<a000000100008d40>] start_kernel_thread+0x20/0x40
sp=e0000040fedbfe30 bsp=e0000040fedb8ba0
Kernel panic - not syncing: Attempted to kill init!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-01-31 21:29    [W:0.100 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site