lkml.org 
[lkml]   [2007]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Subject[take33 1/10] kevent: Description.
    Date
    From

    Description.


    diff --git a/Documentation/kevent.txt b/Documentation/kevent.txt
    new file mode 100644
    index 0000000..87a1ba9
    --- /dev/null
    +++ b/Documentation/kevent.txt
    @@ -0,0 +1,268 @@
    +Description.
    +
    +int kevent_init(struct kevent_ring *ring, unsigned int ring_size,
    + unsigned int flags);
    +
    +num - size of the ring buffer in events
    +ring - pointer to allocated ring buffer
    +flags - various flags, see KEVENT_FLAGS_* definitions.
    +
    +Return value: kevent control file descriptor or negative error value.
    +
    + struct kevent_ring
    + {
    + unsigned int ring_kidx, ring_over;
    + struct ukevent event[0];
    + }
    +
    +ring_kidx - index in the ring buffer where kernel will put new events
    + when kevent_wait() or kevent_get_events() is called
    +ring_over - number of overflows of ring_uidx happend from the start.
    + Overflow counter is used to prevent situation when two threads
    + are going to free the same events, but one of them was scheduled
    + away for too long, so ring indexes were wrapped, so when that
    + thread will be awakened, it will free not those events, which
    + it suppose to free.
    +
    +Example userspace code (ring_buffer.c) can be found on project's homepage.
    +
    +Each kevent syscall can be so called cancellation point in glibc, i.e. when
    +thread has been cancelled in kevent syscall, thread can be safely removed
    +and no events will be lost, since each syscall (kevent_wait() or
    +kevent_get_events()) will copy event into special ring buffer, accessible
    +from other threads or even processes (if shared memory is used).
    +
    +When kevent is removed (not dequeued when it is ready, but just removed),
    +even if it was ready, it is not copied into ring buffer, since if it is
    +removed, no one cares about it (otherwise user would wait until it becomes
    +ready and got it through usual way using kevent_get_events() or kevent_wait())
    +and thus no need to copy it to the ring buffer.
    +
    +-------------------------------------------------------------------------------
    +
    +
    +int kevent_ctl(int fd, unsigned int cmd, unsigned int num, struct ukevent *arg);
    +
    +fd - is the file descriptor referring to the kevent queue to manipulate.
    +It is created by opening "/dev/kevent" char device, which is created with
    +dynamic minor number and major number assigned for misc devices.
    +
    +cmd - is the requested operation. It can be one of the following:
    + KEVENT_CTL_ADD - add event notification
    + KEVENT_CTL_REMOVE - remove event notification
    + KEVENT_CTL_MODIFY - modify existing notification
    + KEVENT_CTL_READY - mark existing events as ready, if number of events is zero,
    + it just wakes up parked in syscall thread
    +
    +num - number of struct ukevent in the array pointed to by arg
    +arg - array of struct ukevent
    +
    +Return value:
    + number of events processed or negative error value.
    +
    +When called, kevent_ctl will carry out the operation specified in the
    +cmd parameter.
    +-------------------------------------------------------------------------------
    +
    + int kevent_get_events(int ctl_fd, unsigned int min_nr, unsigned int max_nr,
    + struct timespec timeout, struct ukevent *buf, unsigned flags);
    +
    +ctl_fd - file descriptor referring to the kevent queue
    +min_nr - minimum number of completed events that kevent_get_events will block
    + waiting for
    +max_nr - number of struct ukevent in buf
    +timeout - time to wait before returning less than min_nr
    + events. If this is -1, then wait forever.
    +buf - pointer to an array of struct ukevent.
    +flags - various flags, see KEVENT_FLAGS_* definitions.
    +
    +Return value:
    + number of events copied or negative error value.
    +
    +kevent_get_events will wait timeout milliseconds for at least min_nr completed
    +events, copying completed struct ukevents to buf and deleting any
    +KEVENT_REQ_ONESHOT event requests. In nonblocking mode it returns as many
    +events as possible, but not more than max_nr. In blocking mode it waits until
    +timeout or if at least min_nr events are ready.
    +
    +This function copies event into ring buffer if it was initialized, if ring buffer
    +is full, KEVENT_RET_COPY_FAILED flag is set in ret_flags field.
    +-------------------------------------------------------------------------------
    +
    + int kevent_wait(int ctl_fd, unsigned int num, unsigned int old_uidx,
    + struct timespec timeout, unsigned int flags);
    +
    +ctl_fd - file descriptor referring to the kevent queue
    +num - number of processed kevents
    +old_uidx - the last index user is aware of
    +timeout - time to wait until there is free space in kevent queue
    +flags - various flags, see KEVENT_FLAGS_* definitions.
    +
    +Return value:
    + number of events copied into ring buffer or negative error value.
    +
    +This syscall waits until either timeout expires or at least one event becomes
    +ready. It also copies events into special ring buffer. If ring buffer is full,
    +it waits until there are ready events and then return.
    +If kevent is one-shot kevent it is removed in this syscall.
    +If kevent is edge-triggered (KEVENT_REQ_ET flag is set in 'req_flags') it is
    +requeued in this syscall for performance reasons.
    +-------------------------------------------------------------------------------
    +
    + int kevent_commit(int ctl_fd, unsigned int new_idx, unsigned int over);
    +
    +ctl_fd - file descriptor referring to the kevent queue
    +new_uidx - the last committed kevent
    +over - overflow count for given $new_idx value
    +
    +Return value:
    + number of committed kevents or negative error value.
    +
    +This function commits, i.e. marks as empty, slots in the ring buffer, so
    +they can be reused when userspace completes that entries processing.
    +
    +Overflow counter is used to prevent situation when two threads are going
    +to free the same events, but one of them was scheduled away for too long,
    +so ring indexes were wrapped, so when that thread will be awakened, it
    +will free not those events, which it suppose to free.
    +
    +It is possible that returned number of committed events will be smaller than
    +requested number - it is possible when several threads try to commit the
    +same events.
    +-------------------------------------------------------------------------------
    +
    +long aio_sendfile(int kevent_fd, int sock_fd, int in_fd, off_t offset, size_t count);
    +
    +kevent_fd - file descriptor referring to the kevent queue
    +sock_fd - destination socket file descriptor
    +in_fd - source file descriptor
    +offset - offset from the beginning of the source file
    +count - number of bytes to transfer
    +
    +Async sendfile implementation.
    +Returned coockie can be used to determine which entry has been returned by
    +kevent_get_events() - it will be stored in event.ptr.
    +event.ret_data will contain number of bytes actually transferred.
    +-------------------------------------------------------------------------------
    +
    +long aio_sendfile_path(int kevent_fd, int sock_fd,
    + char *filename, off_t offset, size_t count);
    +
    +kevent_fd - file descriptor referring to the kevent queue
    +sock_fd - destination socket file descriptor
    +pathname - source filename
    +offset - offset from the beginning of the source file
    +count - number of bytes to transfer
    +-------------------------------------------------------------------------------
    +
    +The bulk of the interface is entirely done through the ukevent struct.
    +It is used to add event requests, modify existing event requests,
    +specify which event requests to remove, and return completed events.
    +
    +struct ukevent contains the following members:
    +
    +struct kevent_id id
    + Id of this request, e.g. socket number, file descriptor and so on
    +__u32 type
    + Event type, e.g. KEVENT_SOCK, KEVENT_INODE, KEVENT_TIMER and so on
    +__u32 event
    + Event itself, e.g. SOCK_ACCEPT, INODE_CREATED, TIMER_FIRED
    +__u32 req_flags
    + Per-event request flags,
    +
    + KEVENT_REQ_ONESHOT
    + event will be removed when it is ready
    +
    + KEVENT_REQ_WAKEUP_ALL
    + Kevent wakes up only first thread interested in given event,
    + or all threads if this flag is set.
    +
    + KEVENT_REQ_ET
    + Edge Triggered behaviour. It is an optimisation which allows to move
    + ready and dequeued (i.e. copied to userspace) event to move into set
    + of interest for given storage (socket, inode and so on) again. It is
    + very usefull for cases when the same event should be used many times
    + (like reading from pipe). It is similar to epoll()'s EPOLLET flag.
    +
    + KEVENT_REQ_LAST_CHECK
    + if set allows to perform the last check on kevent (call appropriate
    + callback) when kevent is marked as ready and has been removed from
    + ready queue. If it will be confirmed that kevent is ready
    + (k->callbacks.callback(k) returns true) then kevent will be copied
    + to userspace, otherwise it will be requeued back to storage.
    + Second (checking) call is performed with this bit cleared, so callback
    + can detect when it was called from kevent_storage_ready() - bit is set,
    + or kevent_dequeue_ready() - bit is cleared. If kevent will be requeued,
    + bit will be set again.
    +
    + KEVENT_REQ_ALWAYS_QUEUE
    + If this flag is set kevent will be queued into ready queue if it is
    + ready at enqueue time, otherwise it will be copied back to userspace
    + and will not be queued into the storage.
    +
    + KEVENT_REQ_READY
    + If this flag is set, kevent will be marked as ready immediately at enqueue
    + time.
    +
    +__u32 ret_flags
    + Per-event return flags
    +
    + KEVENT_RET_BROKEN
    + Kevent is broken
    +
    + KEVENT_RET_DONE
    + Kevent processing was finished successfully
    +
    + KEVENT_RET_COPY_FAILED
    + Kevent was not copied into ring buffer due to some error conditions.
    +
    +__u32 ret_data
    + Event return data. Event originator fills it with anything it likes
    + (for example timer notifications put number of milliseconds when timer
    + has fired
    +union { __u32 user[2]; void *ptr; }
    + User's data. It is not used, just copied to/from user. The whole structure
    + is aligned to 8 bytes already, so the last union is aligned properly.
    +
    +-------------------------------------------------------------------------------
    +
    +Kevent waiting syscall flags.
    +
    +KEVENT_FLAGS_ABSTIME - provided timespec parameter contains absolute time,
    + for example Aug 27, 2194, or time(NULL) + 10.
    +
    +-------------------------------------------------------------------------------
    +
    +Usage
    +
    +For KEVENT_CTL_ADD, all fields relevant to the event type must be filled
    +(id, type, event, req_flags).
    +After kevent_ctl(..., KEVENT_CTL_ADD, ...) returns each struct's ret_flags
    +should be checked to see if the event is already broken or done.
    +
    +For KEVENT_CTL_MODIFY, the id, req_flags, and user and event fields must be
    +set and an existing kevent request must have matching id and user fields. If
    +match is found, req_flags and event are replaced with the newly supplied
    +values and requeueing is started, so modified kevent can be checked and
    +probably marked as ready immediately. If a match can't be found, the
    +passed in ukevent's ret_flags has KEVENT_RET_BROKEN set. KEVENT_RET_DONE is
    +always set.
    +
    +For KEVENT_CTL_REMOVE, the id and user fields must be set and an existing
    +kevent request must have matching id and user fields. If a match is found,
    +the kevent request is removed. If a match can't be found, the passed in
    +ukevent's ret_flags has KEVENT_RET_BROKEN set. KEVENT_RET_DONE is always set.
    +
    +For kevent_get_events, the entire structure is returned.
    +
    +-------------------------------------------------------------------------------
    +
    +Usage cases
    +
    +kevent_timer
    +struct ukevent should contain following fields:
    + type - KEVENT_TIMER
    + event - KEVENT_TIMER_FIRED
    + req_flags - KEVENT_REQ_ONESHOT if you want to fire that timer only once
    + id.raw[0] - number of seconds after commit when this timer shout expire
    + id.raw[0] - additional to number of seconds number of nanoseconds
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2007-01-17 09:05    [W:0.043 / U:0.212 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site