lkml.org 
[lkml]   [2006]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 4/8] at91_serial -> atmel_serial: Platform device name
On Wed, 27 Sep 2006 18:58:01 +0200
Haavard Skinnemoen <hskinnemoen@atmel.com> wrote:

> Rename the "at91_usart" platform driver "atmel_usart" and update
> platform devices accordingly.

Hmm...seems like I've been too busy testing things on ARM, because this
one breaks AVR32 ;-)

Updated patch below. No ARM- or at91_serial-related stuff is changed.

Haavard
---
From: Haavard Skinnemoen <hskinnemoen@atmel.com>
Subject: [PATCH] at91_serial -> atmel_serial: Platform device name
Rename the "at91_usart" platform driver "atmel_usart" and update
platform devices accordingly.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---
arch/arm/mach-at91rm9200/devices.c | 10 ++++-----
arch/avr32/mach-at32ap/at32ap7000.c | 40 ++++++++++++++++++-----------------
drivers/serial/atmel_serial.c | 2 +-
3 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c
index 467ef6d..78d6a1a 100644
--- a/arch/arm/mach-at91rm9200/devices.c
+++ b/arch/arm/mach-at91rm9200/devices.c
@@ -564,7 +564,7 @@ static struct at91_uart_data dbgu_data =
};

static struct platform_device at91rm9200_dbgu_device = {
- .name = "at91_usart",
+ .name = "atmel_usart",
.id = 0,
.dev = {
.platform_data = &dbgu_data,
@@ -599,7 +599,7 @@ static struct at91_uart_data uart0_data
};

static struct platform_device at91rm9200_uart0_device = {
- .name = "at91_usart",
+ .name = "atmel_usart",
.id = 1,
.dev = {
.platform_data = &uart0_data,
@@ -641,7 +641,7 @@ static struct at91_uart_data uart1_data
};

static struct platform_device at91rm9200_uart1_device = {
- .name = "at91_usart",
+ .name = "atmel_usart",
.id = 2,
.dev = {
.platform_data = &uart1_data,
@@ -682,7 +682,7 @@ static struct at91_uart_data uart2_data
};

static struct platform_device at91rm9200_uart2_device = {
- .name = "at91_usart",
+ .name = "atmel_usart",
.id = 3,
.dev = {
.platform_data = &uart2_data,
@@ -717,7 +717,7 @@ static struct at91_uart_data uart3_data
};

static struct platform_device at91rm9200_uart3_device = {
- .name = "at91_usart",
+ .name = "atmel_usart",
.id = 4,
.dev = {
.platform_data = &uart3_data,
diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
index 37982b6..842e7be 100644
--- a/arch/avr32/mach-at32ap/at32ap7000.c
+++ b/arch/avr32/mach-at32ap/at32ap7000.c
@@ -523,33 +523,33 @@ void __init at32_add_system_devices(void
* USART
* -------------------------------------------------------------------- */

-static struct resource usart0_resource[] = {
+static struct resource atmel_usart0_resource[] = {
PBMEM(0xffe00c00),
IRQ(7),
};
-DEFINE_DEV(usart, 0);
-DEV_CLK(usart, usart0, pba, 4);
+DEFINE_DEV(atmel_usart, 0);
+DEV_CLK(usart, atmel_usart0, pba, 4);

-static struct resource usart1_resource[] = {
+static struct resource atmel_usart1_resource[] = {
PBMEM(0xffe01000),
IRQ(7),
};
-DEFINE_DEV(usart, 1);
-DEV_CLK(usart, usart1, pba, 4);
+DEFINE_DEV(atmel_usart, 1);
+DEV_CLK(usart, atmel_usart1, pba, 4);

-static struct resource usart2_resource[] = {
+static struct resource atmel_usart2_resource[] = {
PBMEM(0xffe01400),
IRQ(8),
};
-DEFINE_DEV(usart, 2);
-DEV_CLK(usart, usart2, pba, 5);
+DEFINE_DEV(atmel_usart, 2);
+DEV_CLK(usart, atmel_usart2, pba, 5);

-static struct resource usart3_resource[] = {
+static struct resource atmel_usart3_resource[] = {
PBMEM(0xffe01800),
IRQ(9),
};
-DEFINE_DEV(usart, 3);
-DEV_CLK(usart, usart3, pba, 6);
+DEFINE_DEV(atmel_usart, 3);
+DEV_CLK(usart, atmel_usart3, pba, 6);

static inline void configure_usart0_pins(void)
{
@@ -581,19 +581,19 @@ static struct platform_device *setup_usa

switch (id) {
case 0:
- pdev = &usart0_device;
+ pdev = &atmel_usart0_device;
configure_usart0_pins();
break;
case 1:
- pdev = &usart1_device;
+ pdev = &atmel_usart1_device;
configure_usart1_pins();
break;
case 2:
- pdev = &usart2_device;
+ pdev = &atmel_usart2_device;
configure_usart2_pins();
break;
case 3:
- pdev = &usart3_device;
+ pdev = &atmel_usart3_device;
configure_usart3_pins();
break;
default:
@@ -813,10 +813,10 @@ struct clk *at32_clock_list[] = {
&pio1_mck,
&pio2_mck,
&pio3_mck,
- &usart0_usart,
- &usart1_usart,
- &usart2_usart,
- &usart3_usart,
+ &atmel_usart0_usart,
+ &atmel_usart1_usart,
+ &atmel_usart2_usart,
+ &atmel_usart3_usart,
&macb0_hclk,
&macb0_pclk,
&spi0_mck,
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index e33caa9..b5f9e31 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -947,7 +947,7 @@ static struct platform_driver at91_seria
.suspend = at91_serial_suspend,
.resume = at91_serial_resume,
.driver = {
- .name = "at91_usart",
+ .name = "atmel_usart",
.owner = THIS_MODULE,
},
};
--
1.4.1.1
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-09-28 14:57    [from the cache]
©2003-2011 Jasper Spaans