Messages in this thread | | | Date | Sun, 24 Sep 2006 13:40:19 -0400 | From | "Ryan Moszynski" <> | Subject | Re: /drivers/usb/class/cdc-acm.c patch question, please cc |
| |
sorry guys, my bad.
I just compiled 2.6.18 again with my stock config, and everything worked. With 2.6.15 i had to recompile using the patch and load these in /etc/modules in order for my card to work at full speed.
###### ohci-hcd usbserial vendor=0x0c88 product=0x17da maxSize=2048 cdc_acm maxszr=16384 maxszw=2048 #######
however, now, at boot the kernel loads the 'airprime' driver, and everything works without any manual module loading. Yay. 2.6.15 had the airprime driver, but i guess it didn't recognize my card at that point.
However, to get this(and i would guess any other evdo) card to work, you still have set up 4 config files:
###### etc/ppp/chap-secrets etc/ppp/peers/verizon etc/chatscripts/verizon-connect etc/chatscripts/verizon-disconnect #######
which makes it a lot more labor intensive to set up for the first time than it is in windows, but at least everything works.
On 9/24/06, Oliver Neukum <oliver@neukum.org> wrote: > Am Freitag, 22. September 2006 23:45 schrieb Ryan Moszynski: > > since 2.6.14 i have been applying the following patch and recompiling > > my kernel so > > that i can use my verizon kpc650 evdo card with my laptop. I've > > applied this patch > > succesfully on 2.6.14 and 2.6.15. It works great and I have no problems. I am > > trying to apply the patch to 2.6.18 but it fails, and i don't want to > > break anything, > > First give me a description of your device. Secondly, we'll try > to find a generic solution. Thirdly, if nothing else helps, we'll add > a generic quirk to the driver. > > Regards > Oliver > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |