Messages in this thread | | | Date | Fri, 15 Sep 2006 13:31:59 -0700 | Subject | Re: Same MCE on 4 working machines (was Re: Early boot hang on recent 2.6 kernels (> 2.6.3), on x86-64 with 16gb of RAM) | From | Robin Lee Powell <> |
| |
On Fri, Sep 15, 2006 at 09:50:39PM +0100, Alan Cox wrote: > Ar Gwe, 2006-09-15 am 11:29 -0700, ysgrifennodd Robin Lee Powell: > > > pci=conf2 > > > > No effect without acpi=off. > > > > With acpi=off, it gets rather farther before apparently failing to > > talk the 3-ware card: > > Thats helpful. The conf2 cycles are the wrong type for the board > so with acpi=off pci=conf2 it doesn't see any PCI devices and > doesn't explode. I see nothing odd in the lspci data at all > however. > > You also have a lot of RAM, that shouldn't matter but it means you > hit code paths most users don't. If you boot with mem limited to > 1GB I assume it still blows up ?
I've tried mem=1023M, yes, and it still blows up. Just did acpi=off mem=1023M to check.
-Robin - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |