lkml.org 
[lkml]   [2006]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectresult of pci=assign-busses on HP NW9440 laptop
dmesg on booting a 2.6.17.7 kernel on the HP NW9440 laptop reports:
> PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
> Please report the result to linux-kernel to fix this permanently

I'm not quite sure which part of the dmesg output I'm supposed to
report. When I enable pci=assign-busses, the piece of dmesg that
reports the warning says nothing, but later on in dmesg where it is
printing out information about busses, it says:

> PCI: Bus 6, cardbus bridge: 0000:05:06.0
> IO window: 00006000-000060ff
> IO window: 00006400-000064ff
> PREFETCH window: 88000000-89ffffff
> MEM window: 8a000000-8bffffff

Instead of PCI: Bus 3, ...

I didn't notice anything else changing. If I should run some other
command or provide other output, tell me what to run and I'll report
the output.

Please CC me directly since I'm not subscribed to linux-kernel.
-Eric


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-08-05 00:45    [W:0.039 / U:1.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site