lkml.org 
[lkml]   [2006]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH] usbnet: add a mutex around phy register access
    Date
    When working on the mcs7830, I noticed the need for a mutex in its
    mdio_read/mdio_write functions. A related problem seems to be present
    in the asix driver in the respective functions.

    This introduces a mutex in the common usbnet driver and uses it
    from the two hardware specific drivers.

    Signed-off-by: Arnd Bergmann <arnd@arndb.de>

    ---

    drivers/usb/net/asix.c | 4 ++++
    drivers/usb/net/mcs7830.c | 5 +++++
    drivers/usb/net/usbnet.c | 1 +
    drivers/usb/net/usbnet.h | 1 +
    4 files changed, 11 insertions(+)

    Index: linux-cg/drivers/usb/net/asix.c
    ===================================================================
    --- linux-cg.orig/drivers/usb/net/asix.c 2006-08-20 21:22:43.000000000 +0200
    +++ linux-cg/drivers/usb/net/asix.c 2006-08-20 22:09:31.000000000 +0200
    @@ -328,10 +328,12 @@
    struct usbnet *dev = netdev_priv(netdev);
    u16 res;

    + mutex_lock(&dev->phy_mutex);
    asix_set_sw_mii(dev);
    asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
    (__u16)loc, 2, (u16 *)&res);
    asix_set_hw_mii(dev);
    + mutex_unlock(&dev->phy_mutex);

    return res & 0xffff;
    }
    @@ -348,10 +350,12 @@
    struct usbnet *dev = netdev_priv(netdev);
    u16 res = val;

    + mutex_lock(&dev->phy_mutex);
    asix_set_sw_mii(dev);
    asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
    (__u16)loc, 2, (u16 *)&res);
    asix_set_hw_mii(dev);
    + mutex_unlock(&dev->phy_mutex);
    }

    /* same as above, but converts new value to le16 byte order before writing */
    Index: linux-cg/drivers/usb/net/usbnet.c
    ===================================================================
    --- linux-cg.orig/drivers/usb/net/usbnet.c 2006-08-20 21:22:43.000000000 +0200
    +++ linux-cg/drivers/usb/net/usbnet.c 2006-08-20 22:09:31.000000000 +0200
    @@ -1070,6 +1070,7 @@
    dev->delay.function = usbnet_bh;
    dev->delay.data = (unsigned long) dev;
    init_timer (&dev->delay);
    + mutex_init (&dev->phy_mutex);

    SET_MODULE_OWNER (net);
    dev->net = net;
    Index: linux-cg/drivers/usb/net/usbnet.h
    ===================================================================
    --- linux-cg.orig/drivers/usb/net/usbnet.h 2006-08-20 21:22:43.000000000 +0200
    +++ linux-cg/drivers/usb/net/usbnet.h 2006-08-20 22:09:31.000000000 +0200
    @@ -30,6 +30,7 @@
    struct usb_device *udev;
    struct driver_info *driver_info;
    wait_queue_head_t *wait;
    + struct mutex phy_mutex;

    /* i/o info: pipes etc */
    unsigned in, out;
    Index: linux-cg/drivers/usb/net/mcs7830.c
    ===================================================================
    --- linux-cg.orig/drivers/usb/net/mcs7830.c 2006-08-20 21:47:06.000000000 +0200
    +++ linux-cg/drivers/usb/net/mcs7830.c 2006-08-20 22:09:31.000000000 +0200
    @@ -178,6 +178,7 @@
    HIF_REG_PHY_CMD2_PEND_FLAG_BIT | index,
    };

    + mutex_lock(&dev->phy_mutex);
    /* write the MII command */
    ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
    if (ret < 0)
    @@ -202,6 +203,7 @@
    dev_dbg(&dev->udev->dev, "read PHY reg %02x: %04x (%d tries)\n",
    index, val, i);
    out:
    + mutex_unlock(&dev->phy_mutex);
    return ret;
    }

    @@ -216,6 +218,8 @@
    HIF_REG_PHY_CMD2_PEND_FLAG_BIT | (index & 0x1F),
    };

    + mutex_lock(&dev->phy_mutex);
    +
    /* write the new register contents */
    le_val = cpu_to_le16(val);
    ret = mcs7830_set_reg(dev, HIF_REG_PHY_DATA, 2, &le_val);
    @@ -242,6 +246,7 @@
    dev_dbg(&dev->udev->dev, "write PHY reg %02x: %04x (%d tries)\n",
    index, val, i);
    out:
    + mutex_unlock(&dev->phy_mutex);
    return ret;
    }

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/
    \
     
     \ /
      Last update: 2006-08-20 22:15    [W:2.325 / U:0.036 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site