lkml.org 
[lkml]   [2006]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 2.6.18-rc4-mm1 5/8] ieee1394: sbp2: better handling of transport errors
If the target signals a transport failure via status block, complete the
request with DID_BUSY to indicate to the SCSI subsystem that the command
may succeed when retried.

Also log diagnostic information if the status block shows a transport
related problem. It may point to hardware faults.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
drivers/ieee1394/sbp2.c | 16 +++++++++++-----
drivers/ieee1394/sbp2.h | 6 +++---
2 files changed, 14 insertions(+), 8 deletions(-)

Index: linux/drivers/ieee1394/sbp2.h
===================================================================
--- linux.orig/drivers/ieee1394/sbp2.h
+++ linux/drivers/ieee1394/sbp2.h
@@ -181,11 +181,11 @@ struct sbp2_unrestricted_page_table {
#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT 0xff

#define STATUS_GET_SRC(value) (((value) >> 30) & 0x3)
+#define STATUS_GET_RESP(value) (((value) >> 28) & 0x3)
#define STATUS_GET_LEN(value) (((value) >> 24) & 0x7)
+#define STATUS_GET_SBP_STATUS(value) (((value) >> 16) & 0xff)
#define STATUS_GET_ORB_OFFSET_HI(value) ((value) & 0x0000ffff)
-#define STATUS_TEST_D(value) ((value) & 0x08000000)
-/* test 'resp' | 'sbp2_status' */
-#define STATUS_TEST_RS(value) ((value) & 0x30ff0000)
+#define STATUS_TEST_DEAD(value) ((value) & 0x08000000)
/* test 'resp' | 'dead' | 'sbp2_status' */
#define STATUS_TEST_RDS(value) ((value) & 0x38ff0000)

Index: linux/drivers/ieee1394/sbp2.c
===================================================================
--- linux.orig/drivers/ieee1394/sbp2.c
+++ linux/drivers/ieee1394/sbp2.c
@@ -2223,28 +2223,34 @@ static int sbp2_handle_status_write(stru
spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);

if (SCpnt) {
- if (STATUS_TEST_RS(sb->ORB_offset_hi_misc))
+ u32 h = sb->ORB_offset_hi_misc;
+ u32 r = STATUS_GET_RESP(h);
+
+ if (r != RESP_STATUS_REQUEST_COMPLETE) {
+ SBP2_WARN("resp 0x%x, sbp_status 0x%x",
+ r, STATUS_GET_SBP_STATUS(h));
scsi_status =
+ r == RESP_STATUS_TRANSPORT_FAILURE ?
+ SBP2_SCSI_STATUS_BUSY :
SBP2_SCSI_STATUS_COMMAND_TERMINATED;
+ }
/*
* See if the target stored any scsi status information.
*/
- if (STATUS_GET_LEN(sb->ORB_offset_hi_misc) > 1) {
+ if (STATUS_GET_LEN(h) > 1) {
SBP2_DEBUG("CHECK CONDITION");
scsi_status = sbp2_status_to_sense_data(
(unchar *)sb, SCpnt->sense_buffer);
}
-
/*
* Check to see if the dead bit is set. If so, we'll
* have to initiate a fetch agent reset.
*/
- if (STATUS_TEST_D(sb->ORB_offset_hi_misc)) {
+ if (STATUS_TEST_DEAD(h)) {
SBP2_DEBUG("Dead bit set - "
"initiating fetch agent reset");
sbp2_agent_reset(scsi_id, 0);
}
-
SBP2_ORB_DEBUG("completing command orb %p", &command->command_orb);
}


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-08-14 19:53    [W:0.043 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site