Messages in this thread | | | From | Andrey Borzenkov <> | Subject | Re: 2.6.17.2 + libata + pata_ali - interminnent can't resume after STR | Date | Tue, 4 Jul 2006 22:54:00 +0400 |
| |
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
On Monday 03 July 2006 11:22, Andrey Borzenkov wrote: > 2.6.17.2, libata for 2.6.17 from Tejun Heo > (http://home-tj.org/files/libata-tj-stable/libata-tj-2.6.17-20060625.tar.bz >2), pata_ali from Jeff Garzik tree patched to add parameter to set transfer > mask for ATAPI (as already posted it does not detect CD-ROM in DMA so I > clamp it to PIO4). System - TOSHIBA Portege 4000. > > Several times after switching to libata system hung on resume from suspend > to RAM. It is stuck attempting to initialize hard drive and doing recovery > in loop. > > Unfortunately this notebook does not have any serial port so it is somewhat > hard capture any console output during resume. >
Well, I now had one case where it silently remounted root ro without leaving any trace in dmesg; and one case where it recovered after some attempt. Here is dmesg from the latter:
pccard: card ejected from slot 0 Stopping tasks: =============================================================================| pnp: Device 00:09 disabled. Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. BUG: sleeping function called from invalid context at include2/asm/semaphore.h:99 in_atomic():0, irqs_disabled():1 <c010405d> show_trace+0xd/0x10 <c0104607> dump_stack+0x17/0x20 <c0115f78> __might_sleep+0xa8/0xc0 <c01d4d73> acpi_os_wait_semaphore+0x65/0xbb <c01ea55e> acpi_ut_acquire_mutex+0x35/0x73 <c01e0c22> acpi_set_register+0x5a/0x16e <c01d925f> acpi_clear_event+0x25/0x2b <c01eabd7> acpi_pm_enter+0x93/0xb8 <c013603c> suspend_enter+0x4c/0x60 <c0136110> enter_state+0xc0/0x170 <c0136266> state_store+0xa6/0xb0 <c0196f8b> subsys_attr_store+0x2b/0x40 <c01972a3> sysfs_write_file+0xa3/0x100 <c015dfd9> vfs_write+0x99/0x160 <c015e5fd> sys_write+0x3d/0x70 <c0102f1b> sysenter_past_esp+0x54/0x75 Back to C! BUG: sleeping function called from invalid context at /home/bor/src/linux-git/mm/slab.c:2793 in_atomic():0, irqs_disabled():1 <c010405d> show_trace+0xd/0x10 <c0104607> dump_stack+0x17/0x20 <c0115f78> __might_sleep+0xa8/0xc0 <c015a269> kmem_cache_alloc+0x59/0x70 <c01d4733> acpi_os_acquire_object+0xe/0x3c <c01ea211> acpi_ut_allocate_object_desc_dbg+0x13/0x45 <c01ea25b> acpi_ut_create_internal_object_dbg+0x18/0x6a <c01e62aa> acpi_rs_set_srs_method_data+0x3a/0xaa <c01e5c82> acpi_set_current_resources+0x1b/0x24 <c01ed8a9> acpi_pci_link_set+0xfb/0x174 <c01ed959> irqrouter_resume+0x37/0x56 <c0211844> __sysdev_resume+0x14/0x80 <c0211a87> sysdev_resume+0x57/0x90 <c0216d38> device_power_up+0x8/0x10 <c0136043> suspend_enter+0x53/0x60 <c0136110> enter_state+0xc0/0x170 <c0136266> state_store+0xa6/0xb0 <c0196f8b> subsys_attr_store+0x2b/0x40 <c01972a3> sysfs_write_file+0xa3/0x100 <c015dfd9> vfs_write+0x99/0x160 <c015e5fd> sys_write+0x3d/0x70 <c0102f1b> sysenter_past_esp+0x54/0x75 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11 PM: Writing back config space on device 0000:00:02.0 at offset f (was 500001ff, writing 5000010b) ACPI: PCI Interrupt 0000:00:04.0[A]: no GSI PM: Writing back config space on device 0000:00:06.0 at offset f (was 180201ff, writing 1802010b) PM: Writing back config space on device 0000:00:0a.0 at offset f (was 380801ff, writing 3808010b) PM: Writing back config space on device 0000:00:10.0 at offset 6 (was 50200, writing b0050200) PM: Writing back config space on device 0000:00:10.0 at offset 1 (was 2100003, writing 2100007) ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 pccard: PCMCIA card inserted into slot 0 pcmcia: registering new device pcmcia0.0 eth0: PRI 31 variant 2 version 9.48 eth0: NIC 5 variant 2 version 1.02 eth0: Wireless, io_addr 0x100, irq 11, mac_address 00:02:2D:26:95:6C PM: Writing back config space on device 0000:00:11.0 at offset 1 (was 4900003, writing 4900007) ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PM: Writing back config space on device 0000:00:11.1 at offset 1 (was 4900003, writing 4900007) ACPI: PCI Interrupt 0000:00:11.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PM: Writing back config space on device 0000:00:12.0 at offset f (was 1ff, writing 10b) PM: Writing back config space on device 0000:01:00.0 at offset f (was 1ff, writing 10b) pnp: Failed to activate device 00:05. pnp: Failed to activate device 00:06. pnp: Device 00:09 activated. usb usb1: root hub lost power or was reset Restarting tasks...<4>ATA: abnormal status 0x80 on port 0x1F7 ATA: abnormal status 0x80 on port 0x1F7 ATA: abnormal status 0x80 on port 0x1F7 done ATA: abnormal status 0xD0 on port 0x1F7 ReiserFS: warning: is_tree_node: node level 0 does not match to the expected one 1 ReiserFS: sda2: warning: vs-5150: search_by_key: invalid format found in block 2722987. Fsck? ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: (BMDMA stat 0xa4) ata1.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout) ata1: soft resetting port ata1.00: configured for UDMA/33 ata1: EH complete SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back
thank you
> I have been using STR with legacy IDE drivers without any problems so far. > Any idea how to debug it welcome. > > Thank you > > -andrey > > {pts/0}% sudo lspci -vvv > 00:00.0 Host bridge: ALi Corporation M1644/M1644T Northbridge+Trident (rev > 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ >SERR- <PERR+ > Latency: 0 > Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M] > Capabilities: [b0] AGP version 2.0 > Status: RQ=28 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- > HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- > Rate=<none> > Capabilities: [a4] Power Management version 1 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller (prog-if 00 > [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: f7f00000-fdffffff > Prefetchable memory behind bridge: 3c000000-3c0fffff > Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR+ > BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- > > 00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) > (prog-if 10 [OHCI]) > Subsystem: Toshiba America Info Systems Unknown device 0004 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (20000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at f7eff000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:04.0 IDE interface: ALi Corporation M5229 IDE (rev c3) (prog-if f0) > Subsystem: Toshiba America Info Systems Unknown device 0004 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (500ns min, 1000ns max) > Interrupt: pin A routed to IRQ 255 > Region 4: I/O ports at eff0 [size=16] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link > Controller Audio Device (rev 01) > Subsystem: Toshiba America Info Systems Unknown device 0001 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR+ <PERR+ > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at ed00 [size=256] > Region 1: Memory at f7efe000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:07.0 ISA bridge: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin > IV/V/V+] > Subsystem: Toshiba America Info Systems Unknown device 0004 > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Capabilities: [a0] Power Management version 1 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:08.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU] > Subsystem: Toshiba America Info Systems Unknown device 0001 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > > 00:0a.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] > (rev 08) > Subsystem: Toshiba America Info Systems 8255x-based Fast Ethernet > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at f7efd000 (32-bit, non-prefetchable) [size=4K] > Region 1: I/O ports at eb40 [size=64] > Region 2: Memory at f7d00000 (32-bit, non-prefetchable) [size=1M] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > 00:10.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus > Controller (rev 01) > Subsystem: Lucent Technologies Unknown device ab01 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 168, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at 3c100000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 > Memory window 0: 30000000-31fff000 (prefetchable) > Memory window 1: 32000000-33fff000 > I/O window 0: 00001000-000010ff > I/O window 1: 00001400-000014ff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt- > PostWrite+ 16-bit legacy interface ports at 0001 > > 00:11.0 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to > Cardbus Bridge with ZV Support (rev 32) > Subsystem: Toshiba America Info Systems Unknown device 0001 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 168 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at 3c101000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=00, secondary=06, subordinate=09, sec-latency=0 > Memory window 0: 34000000-35fff000 (prefetchable) > Memory window 1: 36000000-37fff000 > I/O window 0: 00001800-000018ff > I/O window 1: 00001c00-00001cff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ > PostWrite+ 16-bit legacy interface ports at 0001 > > 00:11.1 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to > Cardbus Bridge with ZV Support (rev 32) > Subsystem: Toshiba America Info Systems Unknown device 0001 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 168 > Interrupt: pin B routed to IRQ 11 > Region 0: Memory at 3c102000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=00, secondary=0a, subordinate=0d, sec-latency=0 > Memory window 0: 38000000-39fff000 (prefetchable) > Memory window 1: 3a000000-3bfff000 > I/O window 0: 00002000-000020ff > I/O window 1: 00002400-000024ff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ > PostWrite+ 16-bit legacy interface ports at 0001 > > 00:12.0 System peripheral: Toshiba America Info Systems SD TypA Controller > (rev 03) > Subsystem: Toshiba America Info Systems Unknown device 0001 > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at f7cffe00 (32-bit, non-prefetchable) [size=512] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade XPAi1 > (rev 82) (prog-if 00 [VGA]) > Subsystem: Toshiba America Info Systems Unknown device 0001 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 8 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=32M] > Region 1: Memory at fbc00000 (32-bit, non-prefetchable) [size=4M] > Region 2: Memory at f8000000 (32-bit, non-prefetchable) [size=32M] > Region 3: Memory at f7ff8000 (32-bit, non-prefetchable) [size=32K] > [virtual] Expansion ROM at 3c000000 [disabled] [size=64K] > Capabilities: [80] AGP version 2.0 > Status: RQ=33 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- > HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- > Rate=<none> > Capabilities: [90] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > {pts/0}% > Linux version 2.6.17.2-1avb (bor@cooker) (gcc version 4.1.1 20060518 > (prerelease)) #26 Fri Jun 30 12:51:27 MSD 2006 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved) > BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS) > BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000001ef60000 (usable) > BIOS-e820: 000000001ef60000 - 000000001ef70000 (ACPI data) > BIOS-e820: 000000001ef70000 - 0000000020000000 (reserved) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > 495MB LOWMEM available. > On node 0 totalpages: 126816 > DMA zone: 4096 pages, LIFO batch:0 > Normal zone: 122720 pages, LIFO batch:31 > DMI 2.3 present. > ACPI: RSDP (v000 TOSHIB ) @ 0x000f0090 > ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef60000 > ACPI: FADT (v002 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef60054 > ACPI: DSDT (v001 TOSHIB 4000 0x20020417 MSFT 0x0100000a) @ 0x00000000 > ACPI: PM-Timer IO Port: 0xee08 > Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000) > Built 1 zonelists > Kernel command line: root=/dev/sda2 resume=/dev/sda1 elevator=cfq vga=791 > Local APIC disabled by BIOS -- you can enable it with "lapic" > mapped APIC to ffffd000 (013e4000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 2048 (order: 11, 8192 bytes) > Detected 747.720 MHz processor. > Using pmtmr for high-res timesource > Console: colour dummy device 80x25 > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Memory: 499052k/507264k available (1667k kernel code, 7648k reserved, 799k > data, 180k init, 0k highmem) > Checking if this processor honours the WP bit even in supervisor mode... > Ok. Calibrating delay using timer specific routine.. 1496.76 BogoMIPS > (lpj=748383) Mount-cache hash table entries: 512 > CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 > 00000000 00000000 00000000 > CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 > 00000000 00000000 00000000 > CPU: L1 I cache: 16K, L1 D cache: 16K > CPU: L2 cache: 256K > CPU serial number disabled. > CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 > 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: Intel Pentium III (Coppermine) stepping 0a > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > Freeing SMP alternatives: 0k freed > ACPI: setting ELCR to 0200 (from 0a00) > checking if image is initramfs... it is > Freeing initrd memory: 292k freed > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: PCI BIOS revision 2.10 entry at 0xfe5ae, last bus=5 > Setting up standard PCI resources > ACPI: Subsystem revision 20060127 > ACPI: Interpreter enabled > ACPI: Using PIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 > PCI quirk: region ee00-ee3f claimed by ali7101 ACPI > PCI quirk: region ef00-ef1f claimed by ali7101 SMB > Boot video device is 0000:01:00.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11) > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] > ACPI: Power Resource [PFAN] (off) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 12 devices > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a > report TC classifier action (bugs to netdev@vger.kernel.org cc > hadi@cyberus.ca) PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: f7f00000-fdffffff > PREFETCH window: 3c000000-3c0fffff > PCI: Bus 2, cardbus bridge: 0000:00:10.0 > IO window: 00001000-000010ff > IO window: 00001400-000014ff > PREFETCH window: 30000000-31ffffff > MEM window: 32000000-33ffffff > PCI: Bus 6, cardbus bridge: 0000:00:11.0 > IO window: 00001800-000018ff > IO window: 00001c00-00001cff > PREFETCH window: 34000000-35ffffff > MEM window: 36000000-37ffffff > PCI: Bus 10, cardbus bridge: 0000:00:11.1 > IO window: 00002000-000020ff > IO window: 00002400-000024ff > PREFETCH window: 38000000-39ffffff > MEM window: 3a000000-3bffffff > PCI: Setting latency timer of device 0000:00:01.0 to 64 > PCI: Enabling device 0000:00:10.0 (0000 -> 0003) > ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 > PCI: setting IRQ 11 as level-triggered > ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 11 (level, low) > -> IRQ 11 > PCI: Enabling device 0000:00:11.0 (0000 -> 0003) > ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 > ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low) > -> IRQ 11 > PCI: Enabling device 0000:00:11.1 (0000 -> 0003) > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 > ACPI: PCI Interrupt 0000:00:11.1[B] -> Link [LNKB] -> GSI 11 (level, low) > -> IRQ 11 > NET: Registered protocol family 2 > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > TCP established hash table entries: 16384 (order: 6, 262144 bytes) > TCP bind hash table entries: 8192 (order: 5, 163840 bytes) > TCP: Hash tables configured (established 16384 bind 8192) > TCP reno registered > audit: initializing netlink socket (disabled) > audit(1151845047.480:1): initialized > Initializing Cryptographic API > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > Activating ISA DMA hang workarounds. > vesafb: framebuffer at 0xfc000000, mapped to 0xdf880000, using 3072k, total > 16384k > vesafb: mode is 1024x768x16, linelength=2048, pages=9 > vesafb: protected mode interface info at c000:775e > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > Console: switching to colour frame buffer device 128x48 > fb0: VESA VGA frame buffer device > Real Time Clock Driver v1.12ac > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize > PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > mice: PS/2 mouse device common for all mice > NET: Registered protocol family 1 > Using IPI Shortcut mode > ACPI wakeup devices: > COM USB1 ASND VIY0 VIY1 LAN MPC0 MPC1 NOV0 LID > ACPI: (supports S0 S3 S4 S5) > BIOS EDD facility v0.16 2004-Jun-25, 1 devices found > Freeing unused kernel memory: 180k freed > Write protecting the kernel read-only data: 520k > input: AT Translated Set 2 keyboard as /class/input/input0 > SCSI subsystem initialized > libata version 1.30 loaded. > ACPI: PCI Interrupt 0000:00:04.0[A]: no GSI > ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xEFF0 irq 14 > scsi0 : pata_ali > ata1.00: configured for UDMA/33 > Vendor: ATA Model: IC25N020ATDA04-0 Rev: DA3O > Type: Direct-Access ANSI SCSI revision: 05 > ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xEFF8 irq 15 > scsi1 : pata_ali > input: ImPS/2 Generic Wheel Mouse as /class/input/input1 > ata2.00: configured for PIO4 > Vendor: TOSHIBA Model: DVD-ROM SD-C2502 Rev: 1313 > Type: CD-ROM ANSI SCSI revision: 05 > SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > sda: sda1 sda2 > sd 0:0:0:0: Attached scsi disk sda > ReiserFS: sda2: found reiserfs format "3.6" with standard journal > ReiserFS: sda2: using ordered data mode > ReiserFS: sda2: journal params: device sda2, size 8192, journal first block > 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 > ReiserFS: sda2: checking transaction log (sda2) > ReiserFS: sda2: replayed 51 transactions in 8 seconds > ReiserFS: sda2: Using r5 hash to sort names > usbcore: registered new driver usbfs > usbcore: registered new driver hub > ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) > ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 > ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKG] -> GSI 11 (level, low) > -> IRQ 11 > ohci_hcd 0000:00:02.0: OHCI Host Controller > ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 > ohci_hcd 0000:00:02.0: irq 11, io mem 0xf7eff000 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 3 ports detected > sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 1:0:0:0: Attached scsi CD-ROM sr0 > Linux agpgart interface v0.101 (c) Dave Jones > agpgart: Detected ALi M1644 chipset > agpgart: AGP aperture is 64M @ 0xf0000000 > ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 11 (level, low) > -> IRQ 11 > Yenta: CardBus bridge found at 0000:00:10.0 [12a3:ab01] > Yenta: Enabling burst memory read transactions > Yenta: Using CSCINT to route CSC interrupts to PCI > Yenta: Routing CardBus interrupts to PCI > Yenta TI: socket 0000:00:10.0, mfunc 0x01000002, devctl 0x60 > Yenta: ISA IRQ mask 0x0000, PCI irq 11 > Socket status: 30000011 > ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low) > -> IRQ 11 > Yenta: CardBus bridge found at 0000:00:11.0 [1179:0001] > Yenta: ISA IRQ mask 0x04b8, PCI irq 11 > Socket status: 30000007 > pccard: PCMCIA card inserted into slot 0 > cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff > 0xe0000-0xfffff cs: memory probe 0x60000000-0x60ffffff: clean. > cs: memory probe 0xa0000000-0xa0ffffff: clean. > pcmcia: registering new device pcmcia0.0 > wlags49_h1_cs v7.18 for PCMCIA, 03/31/2004 14:31:00 by Agere Systems, > http://www.agere.com > *** Modified for kernel 2.6 by Andrey Borzenkov <arvidjaar@mail.ru> > $Revision: 25 $ > *** Station Mode (STA) Support: YES > *** Access Point Mode (AP) Support: YES > eth0: PRI 31 variant 2 version 9.48 > eth0: NIC 5 variant 2 version 1.02 > eth0: Wireless, io_addr 0x100, irq 11, mac_address 00:02:2D:26:95:6C > ACPI: PCI Interrupt 0000:00:11.1[B] -> Link [LNKB] -> GSI 11 (level, low) > -> IRQ 11 > Yenta: CardBus bridge found at 0000:00:11.1 [1179:0001] > Yenta: ISA IRQ mask 0x04b8, PCI irq 11 > Socket status: 30000007 > ACPI: AC Adapter [ADP1] (on-line) > ACPI: Battery Slot [BAT1] (battery present) > ACPI: Battery Slot [BAT2] (battery absent) > ACPI: Power Button (FF) [PWRF] > ACPI: Lid Switch [LID] > ACPI: Fan [FAN] (off) > ACPI: CPU0 (power states: C1[C1] C2[C2]) > ACPI: Thermal Zone [THRM] (38 C) > toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18 > toshiba_acpi: HCI method: \_SB_.VALD.GHCI > ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no) > ReiserFS: sda2: Removing [35299 359282 0x0 SD]..done > ReiserFS: sda2: Removing [160679 286174 0x0 SD]..done > ReiserFS: sda2: Removing [79727 236457 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236448 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236444 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236442 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236438 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236410 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236387 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236369 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236368 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236365 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236363 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236338 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236337 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236336 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236333 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236305 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236299 0x0 SD]..done > ReiserFS: sda2: Removing [45614 236298 0x0 SD]..done > ReiserFS: sda2: Removing [45614 235022 0x0 SD]..done > ReiserFS: sda2: Removing [45614 235014 0x0 SD]..done > ReiserFS: sda2: Removing [45614 234983 0x0 SD]..done > ReiserFS: sda2: Removing [45614 234970 0x0 SD]..done > ReiserFS: sda2: Removing [45614 234954 0x0 SD]..done > ReiserFS: sda2: Removing [45614 234925 0x0 SD]..done > ReiserFS: sda2: Removing [45614 234421 0x0 SD]..done > ReiserFS: sda2: Removing [45614 234416 0x0 SD]..done > ReiserFS: sda2: Removing [45614 234396 0x0 SD]..done > ReiserFS: sda2: Removing [45614 233009 0x0 SD]..done > ReiserFS: sda2: Removing [45614 233007 0x0 SD]..done > ReiserFS: sda2: Removing [45614 233004 0x0 SD]..done > ReiserFS: sda2: Removing [45614 232966 0x0 SD]..done > ReiserFS: sda2: Removing [45614 123769 0x0 SD]..done > ReiserFS: sda2: Removing [45614 100962 0x0 SD]..done > ReiserFS: sda2: Removing [45614 87692 0x0 SD]..done > ReiserFS: sda2: Removing [178237 79655 0x0 SD]..done > ReiserFS: sda2: Removing [45614 74578 0x0 SD]..done > ReiserFS: sda2: There were 38 uncompleted unlinks/truncates. Completed > Adding 500432k swap on /dev/sda1. Priority:-1 extents:1 across:500432k > loop: loaded (max 8 devices) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (GNU/Linux)
iD8DBQFEqrlMR6LMutpd94wRAnKYAJ412evYClTl31Qj2Yp6SDPK7Ae2mACfdInU ajfkKAy2mkMkzPW0wQxFJOQ= =sULC -----END PGP SIGNATURE----- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |