Messages in this thread
|
Hi,
john stultz:
> I'll see what we can do to narrow it down, but its been assumed by both
> x86-64 and the new i386 code that the TSCs on Intel SMP boxes are
> synched, unless we're explicitly told they aren't (Summit, etc).
>
Apparently not. :-/
> Andi: If this is a generic issue, and not specific to Matthias' box, we
> may need to re-think the assumption that Intel SMP is synced. You're
> thoughts?
>
"Your". ;-)
You can probably assume that they're synced on systems with no more
than one dual-core / hyperthreaded CPU.
My system obviously has two of those.
> Matthias: "clock=pmtmr" is probably the best workaround in the short
> term. Could you send me your dmesg and dmidecode output? We'll try to
> find something to key off of so it will mark the tsc as unstable by
> default on your system.
>
I'd assume that finding (and, possibly, being unable to correct) TSC skew
is sufficient. Whether it's also necessary (in the mathematical sense ;-)
for the problem to exist is a question somebody else might want to answer
(or not).
Linux version 2.6.17-test-1.29 (root@kiste) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #2 SMP PREEMPT Sun Jul 23 09:00:44 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000d7f70000 (usable)
BIOS-e820: 00000000d7f70000 - 00000000d7f7b000 (ACPI data)
BIOS-e820: 00000000d7f7b000 - 00000000d7f80000 (ACPI NVS)
BIOS-e820: 00000000d7f80000 - 00000000d8000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000128000000 (usable)
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6700
On node 0 totalpages: 1048576
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 819200 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f6750
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0xd7f75ea1
ACPI: FADT (v001 INTEL TUMWATER 0x06040000 PTL 0x00000003) @ 0xd7f7ae35
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0xd7f7aea9ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0xd7f7af39
ACPI: MCFG (v001 PTLTD Mcfg 0x06040000 LTP 0x00000000) @ 0xd7f7af61ACPI: ASF! (v016 CETP CETP 0x06040000 PTL 0x00000001) @ 0xd7f7af9d
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0xd7f75edd
ACPI: DSDT (v001 Intel Lindhrst 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
Processor #6 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
Processor #7 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at f1000000 (gap: f0000000:0ec00000)
Detected 3000.267 MHz processor.
Built 1 zonelists. Total pages: 1048576
Kernel command line: root=/dev/md1 ro break
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec10000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3483476k/4194304k available (1724k kernel code, 53692k reserved, 982k data, 204k init, 2620864k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6004.95 BogoMIPS (lpj=12009910)Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000641d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20060608
CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6000.69 BogoMIPS (lpj=12001383)CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000641d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
Booting processor 2/6 eip 2000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5600.72 BogoMIPS (lpj=11201451)CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000641d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
CPU2: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
Booting processor 3/7 eip 2000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5600.72 BogoMIPS (lpj=11201442)CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000641d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
CPU3: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
Total of 4 processors activated (23207.09 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 4 CPUs:
CPU#0 had 748437 usecs TSC skew, fixed it up.
CPU#1 had 748437 usecs TSC skew, fixed it up.
CPU#2 had -748437 usecs TSC skew, fixed it up.
CPU#3 had -748437 usecs TSC skew, fixed it up.
Brought up 4 CPUs
migration_cost=85,1724
checking if image is initramfs... it is
Freeing initrd memory: 4192k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:04:03.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *3
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: da100000-da1fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: da200000-da2fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: da300000-da3fffff
PREFETCH window: de000000-dfffffff
PCI: Bridge: 0000:05:04.0
IO window: 4000-4fff
MEM window: dc000000-dc0fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:04:02.0
IO window: 4000-4fff
MEM window: dc000000-dc0fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 3000-4fff
MEM window: da400000-dc0fffff
PREFETCH window: f1000000-f10fffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Initializing Cryptographic API
io scheduler noop registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
Starting balanced_irq
Using IPI Shortcut mode
Freeing unused kernel memory: 204k freed
Time: tsc clocksource has been installed.
[ snip -- /sbin/init gets called here ]
# dmidecode 2.7
SMBIOS 2.33 present.
42 structures occupying 1394 bytes.
Table at 0x000EFC60.
Handle 0x0000, DMI type 0, 20 bytes.
BIOS Information
Vendor: Phoenix Technologies LTD
Version: 6.00
Release Date: 09/29/2005
Address: 0xE1C80
Runtime Size: 123776 bytes
ROM Size: 1024 kB
Characteristics:
ISA is supported
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
USB legacy is supported
Smart battery is supported
BIOS boot specification is supported
Handle 0x0001, DMI type 1, 25 bytes.
System Information
Manufacturer: Intel Corporation
Product Name: Nocona/Tumwater Customer Reference Board
Version: Revision A0
Serial Number: 0123456789
UUID: 0A0A0A0A-0A0A-0A0A-0A0A-0A0A0A0A0A0A
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes.
Base Board Information
Manufacturer: Intel Corporation
Product Name: TYAN Tiger-i7320-S5350
Version: Revision A0
Serial Number: 9876543210
Handle 0x0003, DMI type 3, 17 bytes.
Chassis Information
Manufacturer: No Enclosure
Type: Other
Lock: Not Present
Version: N/A
Serial Number: None
Asset Tag: No Asset Tag
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00001234
Handle 0x0004, DMI type 4, 35 bytes.
Processor Information
Socket Designation: SOCKET603/604
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: 43 0F 00 00 FF FB EB BF
Signature: Type 0, Family 15, Model 4, Stepping 3
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: A0
Voltage: 1.4 V
External Clock: Unknown
Max Speed: 3600 MHz
Current Speed: 3000 MHz
Status: Populated, Enabled
Upgrade: Slot 1
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005, DMI type 7, 19 bytes.
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 16 KB
Maximum Size: 16 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0006, DMI type 7, 19 bytes.
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 2048 KB
Maximum Size: 512 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0007, DMI type 7, 19 bytes.
Cache Information
Socket Designation: L3 Cache
Configuration: Enabled, Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 2048 KB
Maximum Size: 512 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0008, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J2A1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: COM 1
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0009, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: 25 Pin Dual Inline (pin 26 cut)
External Reference Designator: Parallel
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x000A, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: Circular DIN-8 male
Port Type: Keyboard Port
Handle 0x000B, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS/2 Mouse
External Connector Type: Circular DIN-8 male
Port Type: Keyboard Port
Handle 0x000C, DMI type 9, 13 bytes.
System Slot Information
Designation: PCI/33 Slot #3 - J8B2
Type: 32-bit PCI
Current Usage: Unknown
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x000D, DMI type 10, 6 bytes.
On Board Device Information
Type: Sound
Status: Disabled
Description: ADI1886
Handle 0x000E, DMI type 11, 5 bytes.
OEM Strings
String 1: Intel Nocona/Lindenhurst
String 2: CRB - ROADRUNNER
Handle 0x000F, DMI type 12, 5 bytes.
System Configuration Options
Option 1: Jumper settings can be described here.
Handle 0x0010, DMI type 15, 29 bytes.
System Event Log
Area Length: 32 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Invalid, Not Full
Change Token: 0x00000001
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Single-bit ECC memory error
Data Format 2: Multiple-event
Descriptor 3: Multi-bit ECC memory error
Data Format 3: Multiple-event
Handle 0x0011, DMI type 16, 15 bytes.
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0012, DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0011
Error Information Handle: No Error
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: 1
Locator: J3B1
Bank Locator: DIMM A1
Type: DDR
Type Detail: Synchronous
Speed: 166 MHz (6.0 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0013, DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0011
Error Information Handle: No Error
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: 1
Locator: J3B3
Bank Locator: DIMM A2
Type: DDR
Type Detail: Synchronous
Speed: 166 MHz (6.0 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0014, DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0011
Error Information Handle: No Error
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 1
Locator: J2B2
Bank Locator: DIMM A3
Type: DDR
Type Detail: Synchronous
Speed: 166 MHz (6.0 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0015, DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0011
Error Information Handle: No Error
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 1
Locator: J2B4
Bank Locator: DIMM A4
Type: DDR
Type Detail: Synchronous
Speed: 166 MHz (6.0 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0016, DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0011
Error Information Handle: No Error
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: 1
Locator: J3B2
Bank Locator: DIMM B1
Type: DDR
Type Detail: Synchronous
Speed: 166 MHz (6.0 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0017, DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0011
Error Information Handle: No Error
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: 1
Locator: J2B1
Bank Locator: DIMM B2
Type: DDR
Type Detail: Synchronous
Speed: 166 MHz (6.0 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0018, DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0011
Error Information Handle: No Error
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 1
Locator: J2B3
Bank Locator: DIMM B3
Type: DDR
Type Detail: Synchronous
Speed: 166 MHz (6.0 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0019, DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x0011
Error Information Handle: No Error
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 1
Locator: J1B1
Bank Locator: DIMM B4
Type: DDR
Type Detail: Synchronous
Speed: 166 MHz (6.0 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x001A, DMI type 19, 15 bytes.
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FFFFFFFF
Range Size: 4 GB
Physical Array Handle: 0x0011
Partition Width: 0
Handle 0x001B, DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x0012
Memory Array Mapped Address Handle: 0x001A
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x001C, DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x0013
Memory Array Mapped Address Handle: 0x001A
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x001D, DMI type 23, 13 bytes.
System Reset
Status: Enabled
Watchdog Timer: Present
Boot Option: Do Not Reboot
Boot Option On Limit: Do Not Reboot
Reset Count: Unknown
Reset Limit: Unknown
Timer Interval: Unknown
Timeout: Unknown
Handle 0x001E, DMI type 24, 5 bytes.
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Unknown
Administrator Password Status: Enabled
Front Panel Reset Status: Unknown
Handle 0x001F, DMI type 25, 9 bytes.
System Power Controls
Next Scheduled Power-on: 12-31 23:59:59
Handle 0x0020, DMI type 26, 20 bytes.
Voltage Probe
Description: Voltage Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x0021, DMI type 27, 12 bytes.
Cooling Device
Temperature Probe Handle: 0x0022
Type: Fan
Status: OK
OEM-specific Information: 0x00000000
Handle 0x0022, DMI type 28, 20 bytes.
Temperature Probe
Description: Temperature Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x0023, DMI type 29, 20 bytes.
Electrical Current Probe
Description: Electrical Current Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x0024, DMI type 30, 6 bytes.
Out-of-band Remote Access
Manufacturer Name: Intel
Inbound Connection: Enabled
Outbound Connection: Disabled
Handle 0x0025, DMI type 32, 20 bytes.
System Boot Information
Status: <OUT OF SPEC>
Handle 0x0026, DMI type 126, 4 bytes.
Inactive
Handle 0x0027, DMI type 127, 4 bytes.
End Of Table
Handle 0x0028, DMI type 129, 28 bytes.
OEM-specific Type
Header and Data:
81 1C 28 00 01 01 02 01 00 00 00 01 00 00 10 01
00 01 00 01 00 00 18 01 00 02 00 01
Strings:
Intel_ASF_001
Intel_ASF_001
Handle 0x0029, DMI type 127, 4 bytes.
End Of Table
> thanks
> -john
>
>
--
Matthias Urlichs | {M:U} IT Design @ m-u-it.de | smurf@smurf.noris.de
Disclaimer: The quote was selected randomly. Really. | http://smurf.noris.de
- -
:recursion: n. See {recursion}. See also {tail recursion}.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
©2003-2020 Jasper Spaans|hosted at Digital Ocean and my Meterkast|Read the blog