lkml.org 
[lkml]   [2006]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[RFC] input: Wacom tablet driver for simple X hotplugging
Hi,

I've been working on a device driver that simplifies hotplugging Wacom
tablets when running X.

I've posted the driver on the linuxwacom m-l and the response so far
has been positive as it makes hot-plugging Wacom tablets even easier,
but questions has been rised if this couldn't be made into a generic
module for other devices than Wacom tablets.

The 'problem' is that the normal evdev-driver removes the inputX
device when the physical device is unplugged and this causes the
X-server to close the device and not re-open it until the user
switches VT.

My device driver (patch attached below) works pretty much like the
evdev-driver except that it it registers one device when it is loaded
and simulates a Wacom tablet even when none is connected to the
system. This way the X-server will never notice the absence of a
tablet and whenever a tablet is (re)connected it will work without any
tricks.


I'd appreciate whether you think this is a viable idea to make it as a
generic driver instead or should I continue with the Wacom-specific
one. I know the 'right' thing would be to make X truly hot-plug aware,
but this driver is something that would be possible to use in current
systems without any problems.

If it is a viable idea; Which other devices/types of device do you
think could be of interest to handle in a similar fashion? Tablets of
different makes/models are obvious, but are there any others that
would benefit from a similar driver?

And third, should something like this be a separate driver or should
the functionallity be included in the evdev-driver?


Note, the patch is included for idea visualization and not by any
means something I consider ready to be submitted. I know I have a few
issues that I must sort out first, however it does work in its current
state.

BR
Magnus

---

--
diff -uprN -X linux-2.6.17.5/Documentation/dontdiff linux-2.6.17.5-vanilla/drivers/input/Kconfig linux-2.6.17.5/drivers/input/Kconfig
--- linux-2.6.17.5-vanilla/drivers/input/Kconfig 2006-07-15 04:38:43.000000000 +0200
+++ linux-2.6.17.5/drivers/input/Kconfig 2006-07-16 22:22:53.000000000 +0200
@@ -117,6 +117,25 @@ config INPUT_EVDEV
To compile this driver as a module, choose M here: the
module will be called evdev.

+config INPUT_WACOMPROXY
+ tristate "Wacom tablet proxy device"
+ default y
+ depends on EXPERIMENTAL
+ ---help---
+ Say Y here if you want a proxy device that will emulate the
+ latest connected Wacom device when no Wacom tablet is connected.
+ The initial device it will emulate is a Wacom Penpartner. Only
+ one Wacom tablet will be available at a time, and the tablets
+ are opened in the order they are connected. The device is
+ accessible as a single char device 10:xx - /dev/input/wacomproxy.
+
+ The minor device used can be found in the
+ /sys/class/input/wacomproxy/dev file once the module has
+ been loaded.
+
+ To compile this driver as a module, choose M here, the module
+ will be called wacomproxy.
+
config INPUT_EVBUG
tristate "Event debugging"
---help---
diff -uprN -X linux-2.6.17.5/Documentation/dontdiff linux-2.6.17.5-vanilla/drivers/input/Makefile linux-2.6.17.5/drivers/input/Makefile
--- linux-2.6.17.5-vanilla/drivers/input/Makefile 2006-07-15 04:38:43.000000000 +0200
+++ linux-2.6.17.5/drivers/input/Makefile 2006-07-16 23:38:05.000000000 +0200
@@ -11,6 +11,7 @@ obj-$(CONFIG_INPUT_EVDEV) += evdev.o
obj-$(CONFIG_INPUT_TSDEV) += tsdev.o
obj-$(CONFIG_INPUT_POWER) += power.o
obj-$(CONFIG_INPUT_EVBUG) += evbug.o
+obj-$(CONFIG_INPUT_WACOMPROXY) += wacomproxy.o

obj-$(CONFIG_INPUT_KEYBOARD) += keyboard/
obj-$(CONFIG_INPUT_MOUSE) += mouse/
diff -uprN -X linux-2.6.17.5/Documentation/dontdiff linux-2.6.17.5-vanilla/drivers/input/wacomproxy.c linux-2.6.17.5/drivers/input/wacomproxy.c
--- linux-2.6.17.5-vanilla/drivers/input/wacomproxy.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17.5/drivers/input/wacomproxy.c 2006-07-16 23:17:14.000000000 +0200
@@ -0,0 +1,732 @@
+/* -*- linux-c -*-
+ *
+ * Copyright (c) 2006 Magnus Vigerlöf
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/*
+ * ChangeLog:
+ *
+ * 20060702: First version. Based on the work on tabletsdev kernel
+ * module.
+ *
+ * 20060710: Added parameter to make the module act like evdev when
+ * grabbing the device. Fixed a grab-issue, it sometimes
+ * didn't marked the device as grabbed. Updated/fixed the
+ * ioctl-method. Made the whole thing SMP-safe (hopefully).
+ * Fixed a crash when copying data to the dummy-device,
+ *
+ * 20060715: Changed the coding standard to 'Linux kernel coding
+ * style'. Removed a memory leak when disconnecting the
+ * tablet. Removed lots of debug-printk. Parameterized
+ * whether to print the name of an input device that is
+ * skipped.
+ *
+ * 200607XX: Fixed compilation issue with kernel 2.6.17 (wp_ioctl).
+
+ */
+/*
+ * wacomproxy.c: A module that acts like a proxy for one tablet
+ * connected to the system, all other tablets will be put into a list
+ * and when the first connected tablet is unplugged, the next in the
+ * list be used. The device will be accessible as
+ * /dev/input/wacomproxy as long as the module is loaded. Initially
+ * when there's no tablet connected it will emulate a 'Wacom
+ * Penpartner', but as soon as a different tablet is connected it will
+ * automatically change its id to that model (telling all that has the
+ * device open at the time about this). When the tablet is unplugged
+ * the device will retain the id of the last connected tablet so it
+ * will be possible to plug in a tablet of the same model without
+ * affecting the application that has this device open.
+ */
+/*
+ * What needs to be investigated and maybe changed/corrected:
+ *
+ * FINDOUT: GRAB, what should the semantics be?
+ * FINDOUT: Should the device really be registered in 'misc'-major?
+ * FINDOUT: Is there a need to support several connected tablets?
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <linux/major.h>
+#include <linux/miscdevice.h>
+
+#include <linux/input.h>
+#include <linux/list.h>
+
+#include <linux/poll.h>
+
+#include <asm/semaphore.h>
+
+#define WP_MODNAME "wacomproxy"
+#define WP_DEVNAME "wacomproxy"
+#define WP_BUFFER_SIZE 64
+
+#define WP_FLAG_OPEN 0x01
+#define WP_FLAG_GRAB 0x02
+
+/** Additional features, define to turn them on **/
+/* Add the possibillity to force return of ENODEV when opening, */
+/* reading, polling, etc */
+#define OPENFAILCOUNT
+
+/* ################################################################### */
+/* Module Information */
+/* ################################################################### */
+MODULE_AUTHOR("Magnus Vigerlöf <wigge@bigfoot.com>");
+MODULE_DESCRIPTION("Wacom tablet proxy module");
+MODULE_LICENSE("GPL");
+
+/* ################################################################### */
+/* Module Parameters */
+/* ################################################################### */
+static int exclusivegrab = 0;
+module_param(exclusivegrab, bool, 0444);
+MODULE_PARM_DESC(exclusivegrab, "Defines behaviour of the GRAB ioctl, y "
+ "gives the same behaviour as eventX.");
+
+static int debugconnect = 0;
+module_param(debugconnect, bool, 0644);
+MODULE_PARM_DESC(debugconnect, "Defines whether to print the names of "
+ "the ignored devices, y will print the names.");
+
+static short openfailcount = 0;
+#ifdef OPENFAILCOUNT
+module_param(openfailcount, short, 0644);
+MODULE_PARM_DESC(openfailcount, "Number of upcoming open that will fail"
+ " with -ENODEV.");
+#endif
+
+/* ################################################################### */
+/* Module Structures */
+/* ################################################################### */
+/* struct used for keeping track of those who has opened our device */
+struct wp_filenode {
+ struct list_head node;
+
+ int flags;
+ int tabletid;
+
+ struct input_event buffer[WP_BUFFER_SIZE];
+ int head;
+ int tail;
+
+ struct fasync_struct *fasync;
+};
+
+/* struct for keeping track of the connected devices */
+struct wp_devnode {
+ struct list_head node;
+ struct input_handle handle;
+
+ int flags;
+ int tabletid;
+ const char* devdesc;
+};
+
+/* ################################################################### */
+/* Internal Module Variables */
+/* ################################################################### */
+/* List of accepted tablets */
+static const char* wp_tabletlist[] = {
+ "Wacom Penpartner",
+ "Wacom Graphire",
+ "Wacom Graphire2 4x5",
+ "Wacom Graphire2 5x7",
+ "Wacom Graphire3",
+ "Wacom Graphire3 6x8",
+ "Wacom Graphire4 4x5",
+ "Wacom Graphire4 6x8",
+ "Wacom Volito",
+ "Wacom PenStation2",
+ "Wacom Volito2 4x5",
+ "Wacom Volito2 2x3",
+ "Wacom PenPartner2",
+ "Wacom Intuos 4x5",
+ "Wacom Intuos 6x8",
+ "Wacom Intuos 9x12",
+ "Wacom Intuos 12x12",
+ "Wacom Intuos 12x18",
+ "Wacom PL400",
+ "Wacom PL500",
+ "Wacom PL600",
+ "Wacom PL600SX",
+ "Wacom PL550",
+ "Wacom PL800",
+ "Wacom PL700",
+ "Wacom PL510",
+ "Wacom DTU710",
+ "Wacom DTF521",
+ "Wacom DTF720",
+ "Wacom Cintiq Partner",
+ "Wacom Intuos2 4x5",
+ "Wacom Intuos2 6x8",
+ "Wacom Intuos2 9x12",
+ "Wacom Intuos2 12x12",
+ "Wacom Intuos2 12x18",
+ "Wacom Intuos3 4x5",
+ "Wacom Intuos3 6x8",
+ "Wacom Intuos3 9x12",
+ "Wacom Intuos3 12x12",
+ "Wacom Intuos3 12x19",
+ "Wacom Intuos3 6x11",
+ "Wacom Cintiq 21UX",
+ "Wacom Intuos2 6x8",
+ NULL
+};
+
+/* Proxy device/handler data for emulation of tablet */
+static struct input_dev wp_proxydev;
+static struct wp_devnode wp_proxyhndl;
+
+/* Wait queue for blocking operations */
+static wait_queue_head_t wp_waitq;
+
+/* List of those who has opened our device */
+static struct list_head wp_users;
+
+/* List of connected devices */
+static struct list_head wp_tablets;
+
+/* Counter on how many has grabbed the device */
+static int wp_devgrabcount;
+
+/* Misc-dev registering info */
+static struct miscdevice wp_miscdev;
+
+/* Current tablet that provides data to the system */
+static struct wp_devnode* wp_currenthndl;
+
+/* Mutex that serialize all SMP-unsafe activities */
+static struct semaphore wp_sema;
+
+/* ################################################################### */
+/* Module IOCTL Helper Methods */
+/* ################################################################### */
+static int bits_to_user(unsigned long *bits, unsigned int maxbit,
+ unsigned int maxlen, void __user *p)
+{
+ int len = NBITS(maxbit) * sizeof(long);
+
+ if (len > maxlen)
+ len = maxlen;
+
+ return copy_to_user(p, bits, len) ? -EFAULT : len;
+}
+
+static int str_to_user(const char *str, unsigned int maxlen,
+ void __user *p)
+{
+ int len;
+
+ if (!str)
+ return -ENOENT;
+
+ len = strlen(str) + 1;
+ if (len > maxlen)
+ len = maxlen;
+
+ return copy_to_user(p, str, len) ? -EFAULT : len;
+}
+
+/* ################################################################### */
+/* Module File Methods */
+/* ################################################################### */
+static int wp_open(struct inode *inodp, struct file *filp)
+{
+ struct wp_filenode *list;
+
+ if (openfailcount > 0) {
+ openfailcount--;
+ return -ENODEV;
+ }
+
+ if (!(list = kzalloc(sizeof(*list), GFP_KERNEL)))
+ return -ENOMEM;
+
+ filp->private_data = list;
+ list->tabletid = wp_proxyhndl.tabletid;
+
+ down(&wp_sema);
+ list_add_tail(&list->node, &wp_users);
+ if (wp_currenthndl != &wp_proxyhndl) {
+ if (!(wp_currenthndl->flags & WP_FLAG_OPEN)) {
+ if (!input_open_device(&wp_currenthndl->handle))
+ wp_currenthndl->flags |= WP_FLAG_OPEN;
+ else
+ printk(KERN_WARNING WP_MODNAME
+ ": Failed to open '%s'\n",
+ wp_currenthndl->devdesc);
+ }
+ }
+ up(&wp_sema);
+ return 0;
+}
+
+static int wp_fasync(int fd, struct file *filp, int on)
+{
+ struct wp_filenode *list = filp->private_data;
+
+ int retval = fasync_helper(fd, filp, on, &list->fasync);
+ return retval < 0 ? retval : 0;
+}
+
+static int wp_release(struct inode *inodp, struct file *filp)
+{
+ struct wp_filenode *list = filp->private_data;
+
+ down(&wp_sema);
+ list_del(&list->node);
+ if (list->flags & WP_FLAG_GRAB) {
+ wp_devgrabcount--;
+ if (wp_devgrabcount <= 0) {
+ if (wp_currenthndl->flags & WP_FLAG_GRAB) {
+ input_release_device(&wp_currenthndl->handle);
+ wp_currenthndl->flags &= ~WP_FLAG_GRAB;
+ }
+ }
+ }
+ if (list_empty(&wp_users)) {
+ if (wp_currenthndl->flags & WP_FLAG_OPEN) {
+ input_close_device(&wp_currenthndl->handle);
+ wp_currenthndl->flags &= ~WP_FLAG_OPEN;
+ }
+ }
+ up(&wp_sema);
+
+ wp_fasync(-1, filp, 0);
+ kfree(list);
+ return 0;
+}
+
+static ssize_t wp_read(struct file *filp, char __user *buffer,
+ size_t count, loff_t *ppos)
+{
+ struct wp_filenode *list = filp->private_data;
+ struct input_event *event;
+ int retval;
+
+ if (openfailcount > 0)
+ return -ENODEV;
+
+ /* Ensure that the tablet id is the same as we had when we */
+ /* opened it */
+ if (wp_proxyhndl.tabletid != list->tabletid)
+ return -ENODEV;
+
+ if (count < sizeof(*event))
+ return -EINVAL;
+
+ if (list->head == list->tail && (filp->f_flags & O_NONBLOCK))
+ return -EAGAIN;
+
+ retval = wait_event_interruptible(wp_waitq,
+ (list->head != list->tail
+ || wp_proxyhndl.tabletid != list->tabletid));
+ if (retval)
+ return retval;
+
+ /* Ensure that the tablet id is still the same as we had when */
+ /* we opened it */
+ if (wp_proxyhndl.tabletid != list->tabletid)
+ return -ENODEV;
+
+ while (list->head != list->tail && retval + sizeof(*event) <= count) {
+ event = (struct input_event *) list->buffer + list->tail;
+ if (copy_to_user(buffer + retval, event, sizeof(*event)))
+ return -EFAULT;
+ list->tail = (list->tail + 1) & (WP_BUFFER_SIZE - 1);
+ retval += sizeof(*event);
+ }
+ return retval;
+}
+
+static int wp_ioctl(struct inode *inodp, struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ struct wp_filenode *list = filp->private_data;
+ struct input_absinfo abs;
+ int __user *ip = (int __user *)arg;
+
+ if (openfailcount > 0)
+ return -ENODEV;
+
+ /* Ensure that the tablet id is the same as we had when we */
+ /* opened it */
+ if (wp_proxyhndl.tabletid != list->tabletid)
+ return -ENODEV;
+
+ switch (cmd) {
+ case EVIOCGVERSION:
+ return put_user(EV_VERSION, ip);
+
+ case EVIOCGID:
+ if(copy_to_user(ip, &wp_proxydev.id, sizeof(struct input_id)))
+ return -EFAULT;
+ return 0;
+
+ case EVIOCGRAB:
+ if (arg) {
+ /* Check if only one may grab the device at a time */
+ if (exclusivegrab && wp_devgrabcount > 0)
+ return -EBUSY;
+ if (list->flags & WP_FLAG_GRAB)
+ return -EBUSY;
+ down(&wp_sema);
+ list->flags |= WP_FLAG_GRAB;
+ wp_devgrabcount++;
+ if (wp_currenthndl != &wp_proxyhndl) {
+ if (!(wp_currenthndl->flags & WP_FLAG_GRAB)) {
+ if (!input_grab_device(&wp_currenthndl->handle))
+ wp_currenthndl->flags |= WP_FLAG_GRAB;
+ else
+ printk(KERN_WARNING WP_MODNAME
+ ": Failed to grab device\n");
+ }
+ }
+ up(&wp_sema);
+ }
+ else {
+ if (!(list->flags & WP_FLAG_GRAB))
+ return -EINVAL;
+ down(&wp_sema);
+ list->flags &= ~WP_FLAG_GRAB;
+ wp_devgrabcount--;
+ if (wp_currenthndl != &wp_proxyhndl) {
+ if (!wp_devgrabcount) {
+ input_release_device(&wp_currenthndl->handle);
+ wp_currenthndl->flags &= ~WP_FLAG_GRAB;
+ }
+ }
+ up(&wp_sema);
+ }
+ return 0;
+
+ default:
+ if (_IOC_TYPE(cmd) != 'E')
+ return -EINVAL;
+ if (_IOC_DIR(cmd) == _IOC_READ) {
+ if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0,0))) {
+ long *bits;
+ int len;
+ switch (_IOC_NR(cmd) & EV_MAX) {
+ case 0:
+ bits = wp_proxydev.evbit;
+ len = EV_MAX;
+ break;
+ case EV_KEY:
+ bits = wp_proxydev.keybit;
+ len = KEY_MAX;
+ break;
+ case EV_REL:
+ bits = wp_proxydev.relbit;
+ len = REL_MAX;
+ break;
+ case EV_ABS:
+ bits = wp_proxydev.absbit;
+ len = ABS_MAX;
+ break;
+ case EV_MSC:
+ bits = wp_proxydev.mscbit;
+ len = MSC_MAX;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return bits_to_user(bits, len, _IOC_SIZE(cmd), ip);
+ }
+
+ if (_IOC_NR(cmd) == _IOC_NR(EVIOCGNAME(0)))
+ return str_to_user(wp_proxydev.name,
+ _IOC_SIZE(cmd), ip);
+
+ if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCGABS(0))) {
+ int t = _IOC_NR(cmd) & ABS_MAX;
+ abs.value = wp_proxydev.abs[t];
+ abs.minimum = wp_proxydev.absmin[t];
+ abs.maximum = wp_proxydev.absmax[t];
+ abs.fuzz = wp_proxydev.absfuzz[t];
+ abs.flat = wp_proxydev.absflat[t];
+ if (copy_to_user(ip, &abs, sizeof(abs)))
+ return -EFAULT;
+ return 0;
+ }
+ }
+ }
+ return -EINVAL;
+}
+
+static unsigned int wp_poll(struct file *filp, poll_table *wait)
+{
+ struct wp_filenode *list = filp->private_data;
+ int rval = 0;
+
+ poll_wait(filp, &wp_waitq, wait);
+ if (list->head != list->tail)
+ rval = POLLIN | POLLRDNORM;
+
+ /* Add info that we're closed if we've changed tablet id, or */
+ /* failcount > 0 */
+ if (wp_proxyhndl.tabletid != list->tabletid || openfailcount > 0)
+ rval |= POLLIN | POLLRDNORM | POLLHUP | POLLERR;
+
+ return rval;
+}
+
+static struct file_operations wp_fops = {
+ .owner = THIS_MODULE,
+ .open = wp_open,
+ .fasync = wp_fasync,
+ .release = wp_release,
+ .read = wp_read,
+ .ioctl = wp_ioctl,
+ .poll = wp_poll,
+};
+
+/* ################################################################### */
+/* Module Input Methods */
+/* ################################################################### */
+static void wp_event(struct input_handle *handle, unsigned int type,
+ unsigned int code, int value)
+{
+ struct wp_filenode *list;
+
+ down(&wp_sema);
+ list_for_each_entry(list, &wp_users, node) {
+ if (!exclusivegrab || !wp_devgrabcount
+ || list->flags & WP_FLAG_GRAB) {
+ do_gettimeofday(&list->buffer[list->head].time);
+ list->buffer[list->head].type = type;
+ list->buffer[list->head].code = code;
+ list->buffer[list->head].value = value;
+ list->head = (list->head + 1) & (WP_BUFFER_SIZE - 1);
+ kill_fasync(&list->fasync, SIGIO, POLL_IN);
+ }
+ }
+ up(&wp_sema);
+ wake_up_interruptible(&wp_waitq);
+}
+
+static void wp_open_first_dev(void)
+{
+ struct input_dev *dev;
+ struct wp_devnode *devh;
+ struct wp_filenode *list;
+
+ if (wp_currenthndl != &wp_proxyhndl)
+ return;
+
+ if (list_empty(&wp_tablets))
+ return;
+
+ devh = list_entry(wp_tablets.next, struct wp_devnode, node);
+ dev = devh->handle.dev;
+ wp_currenthndl = devh;
+
+ /* Check if the first tablet in the list has the same */
+ /* identification (= the same properties) if so, no need to */
+ /* tell the users that they need to reconnect */
+ if (wp_proxyhndl.tabletid != devh->tabletid) {
+ /* Copy the values we use to the proxy dev struct so */
+ /* we can emulate this dev when it's disconnected */
+ wp_proxydev.name = devh->devdesc;
+ memcpy(&wp_proxydev.id, &dev->id, sizeof(dev->id));
+ memcpy(&wp_proxydev.evbit, &dev->evbit, sizeof(dev->evbit));
+ memcpy(&wp_proxydev.keybit, &dev->keybit, sizeof(dev->keybit));
+ memcpy(&wp_proxydev.relbit, &dev->relbit, sizeof(dev->relbit));
+ memcpy(&wp_proxydev.absbit, &dev->absbit, sizeof(dev->absbit));
+ memcpy(&wp_proxydev.mscbit, &dev->mscbit, sizeof(dev->mscbit));
+ memcpy(&wp_proxydev.absmax, &dev->absmax, sizeof(dev->absmax));
+ memcpy(&wp_proxydev.absmin, &dev->absmin, sizeof(dev->absmin));
+ memcpy(&wp_proxydev.absfuzz, &dev->absfuzz, sizeof(dev->absfuzz));
+ memcpy(&wp_proxydev.absflat, &dev->absflat, sizeof(dev->absflat));
+ /* Tell the world that we're using a new tablet model */
+ wp_proxyhndl.tabletid = devh->tabletid;
+ list_for_each_entry(list, &wp_users, node)
+ kill_fasync(&list->fasync, SIGIO, POLL_HUP);
+ wake_up_interruptible(&wp_waitq);
+ }
+
+ /* No need to open the device if there's a change in */
+ /* the id as all must close/reopen again anyway. */
+ else if (!list_empty(&wp_users)) {
+ if (!input_open_device(&devh->handle)) {
+ devh->flags |= WP_FLAG_OPEN;
+ if (wp_devgrabcount > 0) {
+ if (!input_grab_device(&devh->handle))
+ devh->flags |= WP_FLAG_GRAB;
+ else
+ printk(KERN_WARNING WP_MODNAME
+ ": Failed to grab '%s'\n",
+ dev->name);
+ }
+ }
+ else
+ printk(KERN_WARNING WP_MODNAME
+ ": Failed to open '%s'\n", dev->name);
+ }
+}
+
+static struct input_handle *wp_connect(struct input_handler *handler,
+ struct input_dev *dev,
+ struct input_device_id *id)
+{
+ struct wp_devnode *devh;
+ int c, tab=-1;
+
+ if (!dev->name) {
+ printk(KERN_ERR WP_MODNAME ": Attempting to attach unnamed "
+ "tablet device.\n");
+ return NULL;
+ }
+
+ for (c=0; wp_tabletlist[c]; c++) {
+ if(!strcmp(dev->name, wp_tabletlist[c])) {
+ tab = c;
+ break;
+ }
+ }
+ if (tab == -1) {
+ if (debugconnect)
+ printk(KERN_INFO WP_MODNAME ": Skipping unknown device "
+ "'%s'.\n", dev->name);
+ return NULL;
+ }
+
+ printk(KERN_INFO WP_MODNAME ": Attaching '%s'\n", dev->name);
+ if (!(devh = kzalloc(sizeof(*devh), GFP_KERNEL)))
+ return NULL;
+
+ devh->handle.dev = dev;
+ devh->handle.name = WP_DEVNAME;
+ devh->handle.handler = handler;
+ devh->handle.private = devh;
+ devh->tabletid = tab;
+ devh->devdesc = wp_tabletlist[tab];
+
+ down(&wp_sema);
+ list_add_tail(&devh->node, &wp_tablets);
+ wp_open_first_dev();
+ up(&wp_sema);
+ return &devh->handle;
+}
+
+static void wp_disconnect(struct input_handle *handle)
+{
+ struct wp_devnode *devh = handle->private;
+
+ down(&wp_sema);
+ if (wp_currenthndl == devh) {
+ wp_currenthndl = &wp_proxyhndl;
+ if (devh->flags & WP_FLAG_GRAB) {
+ input_release_device(handle);
+ devh->flags &= ~WP_FLAG_GRAB;
+ }
+ if (devh->flags & WP_FLAG_OPEN) {
+ input_close_device(handle);
+ devh->flags &= ~WP_FLAG_OPEN;
+ }
+ }
+ list_del(&devh->node);
+ wp_open_first_dev();
+ up(&wp_sema);
+ kfree(devh);
+}
+
+static struct input_device_id wp_ids[] = {
+ { .driver_info = 1 }, /* Matches all devices, name match later */
+ { }, /* Terminating Z-entry */
+};
+
+static struct input_handler wp_handler = {
+ .event = wp_event,
+ .connect = wp_connect,
+ .disconnect = wp_disconnect,
+ .name = WP_MODNAME,
+ .id_table = wp_ids,
+};
+
+/* ################################################################### */
+/* Module Initialization Methods */
+/* ################################################################### */
+static void __init wp_moduledatainit(void)
+{
+ init_waitqueue_head(&wp_waitq);
+ INIT_LIST_HEAD(&wp_tablets);
+ INIT_LIST_HEAD(&wp_users);
+ init_MUTEX(&wp_sema);
+
+ /* Initialize proxy device to initially emulate a */
+ /* 'Wacom Penpartner' */
+ wp_proxydev.name = wp_tabletlist[0];
+ wp_proxydev.id.bustype = BUS_USB;
+ wp_proxydev.id.vendor = 0x056a;
+ wp_proxydev.id.product = 0x0000;
+ wp_proxydev.id.version = 0x0001;
+ wp_proxydev.evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
+ wp_proxydev.evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
+ wp_proxydev.keybit[LONG(BTN_TOOL_PEN)] |= BIT(BTN_TOOL_PEN);
+ wp_proxydev.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
+ wp_proxydev.keybit[LONG(BTN_STYLUS)] |= BIT(BTN_STYLUS);
+ wp_proxydev.keybit[LONG(BTN_TOOL_RUBBER)] |= BIT(BTN_TOOL_RUBBER);
+ wp_proxydev.absbit[LONG(ABS_MISC)] |= BIT(ABS_MISC);
+ input_set_abs_params(&wp_proxydev, ABS_X, 0, 5040, 4, 0);
+ input_set_abs_params(&wp_proxydev, ABS_Y, 0, 3780, 4, 0);
+ input_set_abs_params(&wp_proxydev, ABS_PRESSURE, 0, 255, 0, 0);
+
+ wp_proxyhndl.handle.dev = &wp_proxydev;
+ wp_proxyhndl.handle.name = WP_DEVNAME;
+ wp_proxyhndl.handle.private = &wp_proxyhndl;
+ wp_proxyhndl.devdesc = wp_tabletlist[0];
+
+ wp_currenthndl = &wp_proxyhndl;
+}
+
+static int __init wp_init(void)
+{
+ struct class_device *cls;
+ int c;
+
+ wp_moduledatainit();
+
+ wp_miscdev.minor = MISC_DYNAMIC_MINOR;
+ wp_miscdev.name = WP_DEVNAME;
+ wp_miscdev.fops = &wp_fops;
+ if ((c = misc_register(&wp_miscdev)))
+ return c;
+
+ input_register_handler(&wp_handler);
+
+ cls = class_device_create(&input_class, NULL,
+ MKDEV(MISC_MAJOR, wp_miscdev.minor),
+ NULL, WP_DEVNAME);
+ if (IS_ERR(cls)) {
+ input_unregister_handler(&wp_handler);
+ misc_deregister(&wp_miscdev);
+ return PTR_ERR(cls);
+ }
+ return 0;
+}
+
+static void __exit wp_exit(void)
+{
+ class_device_destroy(&input_class,
+ MKDEV(MISC_MAJOR, wp_miscdev.minor));
+ input_unregister_handler(&wp_handler);
+ misc_deregister(&wp_miscdev);
+}
+
+module_init(wp_init);
+module_exit(wp_exit);
+/* Fini */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2006-07-21 23:17    [W:0.214 / U:1.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site