This message generated a parse failure. Raw output follows here. Please use 'back' to navigate. From devnull@lkml.org Thu Apr 18 17:42:15 2024 Delivery-date: Fri, 14 Jul 2006 22:59:17 +0000 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1030379AbWGNW6W (ORCPT ); Fri, 14 Jul 2006 18:58:22 -0400 Received: from smtp6.libero.it ([193.70.192.59]:38129 "EHLO smtp6.libero.it") by vger.kernel.org with ESMTP id S1030215AbWGNW6W convert rfc822-to-8bit (ORCPT ); Fri, 14 Jul 2006 18:58:22 -0400 Received: from localhost (172.16.1.80) by smtp6.libero.it (7.0.027-DD01) id 44992E6402150546 for linux-kernel@vger.kernel.org; Sat, 15 Jul 2006 00:58:20 +0200 Received: from smtp0.libero.it ([172.16.1.204]) by localhost (asav2.libero.it [193.70.192.151]) (amavisd-new, port 10024) with ESMTP id 25617-17 for ; Sat, 15 Jul 2006 00:58:19 +0200 (CEST) Received: from libero.it (192.168.17.5) by smtp0.libero.it (7.0.027-DD01) id 44A3653A003E7B48 for linux-kernel@vger.kernel.org; Sat, 15 Jul 2006 00:58:19 +0200 Date: Sat, 15 Jul 2006 00:58:19 +0200 Message-Id: Subject: unusual messages with kernel 2.6.18-rc1-git6 Mime-Version: 1.0 X-Sensitivity: 3 X-Priority: 1 (Highest) Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT From: "ricciare\@libero\.it" To: "linux-kernel" X-XaM3-API-Version: 4.3 (R1) (B3pl17) X-notifreq: 123 X-SenderIP: 87.17.207.3 X-Scanned: with antispam and antivirus automated system at libero.it Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org I'm using FC4 and an updated kernel version (I've both 2.6.17-1.2141_FC4 and the most recent 2.6.18-rc1-git6 (I've compiled it). While using Kde in both occasions appeared the following simple window (it had just the classical close button) named "KWrited - listening device /dev/pts/1" and it contained the following messages: Message from syslogd@localhost at Fri Jul 14 17:00:12 2006 ... localhost kernel: Oops: 0000 [#1] Message from syslogd@localhost at Fri Jul 14 17:00:12 2006 ... localhost kernel: CPU: 0 Message from syslogd@localhost at Fri Jul 14 17:00:14 2006 ... localhost kernel: EIP is at find_get_pages+0x1f/0x3a Message from syslogd@localhost at Fri Jul 14 17:00:14 2006 ... localhost kernel: eax: 80010028 ebx: 00000004 ecx: db959ee4 edx: 00000400 Message from syslogd@localhost at Fri Jul 14 17:00:14 2006 ... localhost kernel: esi: 00000005 edi: 00000051 ebp: 00000000 esp: db959ea4 Message from syslogd@localhost at Fri Jul 14 17:00:15 2006 ... localhost kernel: ds: 007b es: 007b ss: 0068 Message from syslogd@localhost at Fri Jul 14 17:00:15 2006 ... localhost kernel: Process kswapd0 (pid: 128, ti=db958000 task=db92fab0 task.ti=db958000) Message from syslogd@localhost at Fri Jul 14 17:00:17 2006 ... localhost kernel: 00000400 c10cfe80 c10e39e0 c126be20 c11ad860 c10c5600 c1202ba0 c103e280 Message from syslogd@localhost at Fri Jul 14 17:00:17 2006 ... localhost kernel: Call Trace: Message from syslogd@localhost at Fri Jul 14 17:00:17 2006 ... localhost kernel: Code: 74 03 8b 51 0c ff 42 04 fb 89 c8 c3 56 53 8b 5c 24 0c fa 51 83 c0 04 89 d1 89 da e8 50 da 07 00 89 d9 31 db 89 c6 58 eb 13 8b 11 <8b> 02 f6 c4 40 74 03 8b 52 0c ff 42 04 43 83 c1 04 39 f3 72 e9 Message from syslogd@localhost at Fri Jul 14 17:00:17 2006 ... localhost kernel: EIP: [] find_get_pages+0x1f/0x3a SS:ESP 0068:db959ea4 Message from syslogd@localhost at Fri Jul 14 17:00:16 2006 ... localhost kernel: Stack: 00000000 db959ecc c013be56 db959ed4 da7269dc 00000000 c013c7a8 0000000e Message from syslogd@localhost at Fri Jul 14 17:00:16 2006 ... localhost kernel: ffffffff da726a7c 00000000 00000000 c1072ee0 c10b5280 c10b52a0 c1076980 .. any ideas on the possible cause of such messages? Thanks, Nicola .. this is my dmesg output: Linux version 2.6.18-rc1-git6 (root@localhost.localdomain) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #2 Thu Jul 13 17:35:55 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001c000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 448MB LOWMEM available. On node 0 totalpages: 114688 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 110592 pages, LIFO batch:31 DMI 2.2 present. ACPI: Unable to locate RSDP Allocating PCI resources starting at 20000000 (gap: 1c000000:e3ff0000) Detected 997.503 MHz processor. Built 1 zonelists. Total pages: 114688 Kernel command line: ro root=LABEL=/ rhgb quiet Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01382000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 449924k/458752k available (1832k kernel code, 8312k reserved, 774k data, 192k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1996.32 BogoMIPS (lpj=998162) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: Intel Pentium III (Coppermine) stepping 0a Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 1183k freed PM: Adding info for No Bus:platform NET: Registered protocol family 16 ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C13FCAB0 could not acquire Mutex [2] [20060707] PCI: PCI BIOS revision 2.10 entry at 0xfb1b0, last bus=1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PM: Adding info for No Bus:pci0000:00 PCI quirk: region 4000-40ff claimed by vt82c586 ACPI PCI quirk: region 6000-607f claimed by vt82c686 HW-mon PCI quirk: region 5000-500f claimed by vt82c686 SMB Boot video device is 0000:01:00.0 PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:01.0 PM: Adding info for pci:0000:00:07.0 PM: Adding info for pci:0000:00:07.1 PM: Adding info for pci:0000:00:07.2 PM: Adding info for pci:0000:00:07.4 PM: Adding info for pci:0000:00:08.0 PM: Adding info for pci:0000:00:09.0 PM: Adding info for pci:0000:00:0a.0 PM: Adding info for pci:0000:00:0a.1 PM: Adding info for pci:0000:00:0b.0 PM: Adding info for pci:0000:00:0c.0 PM: Adding info for pci:0000:01:00.0 PM: Adding info for pci:0000:01:00.1 PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0 PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: e8000000-e9ffffff PREFETCH window: d0000000-dfffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered PM: Adding info for platform:pcspkr apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) audit: initializing netlink socket (disabled) audit(1152897054.716:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Disabling Via external APIC routing pci_hotplug: PCI Hot Plug PCI Core version: 0.5 PM: Adding info for platform:vesafb.0 Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA Apollo Pro 133 chipset agpgart: AGP aperture is 128M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled PM: Adding info for platform:serial8250 serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 PCI: VIA IRQ fixup for 0000:00:07.1, from 255 to 0 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1 ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: Maxtor 6L120P0, ATA DISK drive PM: Adding info for No Bus:ide0 hdb: ST315323A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 PM: Adding info for ide:0.0 PM: Adding info for ide:0.1 Probing IDE interface ide1... hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive PM: Adding info for No Bus:ide1 hdd: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 PM: Adding info for ide:1.0 PM: Adding info for ide:1.1 hda: max request size: 128KiB hda: 240121728 sectors (122942 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(66) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 > hdb: max request size: 128KiB hdb: 30008475 sectors (15364 MB) w/512KiB Cache, CHS=29770/16/63, UDMA(66) hdb: cache flushes not supported hdb: hdb1 hdb2 hdc: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. PM: Adding info for platform:i8042 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 PM: Adding info for serio:serio0 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 192k freed Time: tsc clocksource has been installed. PM: Adding info for serio:serio1 SCSI subsystem initialized PCI: setting IRQ 11 as level-triggered PCI: Found IRQ 11 for device 0000:00:0b.0 PCI: Sharing IRQ 11 with 0000:00:07.2 input: AT Translated Set 2 keyboard as /class/input/input0 logips2pp: Detected unknown logitech mouse model 90 input: ImExPS/2 Logitech Explorer Mouse as /class/input/input1 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs PM: Adding info for No Bus:host0 PM: Adding info for No Bus:target0:0:0 PM: Removing info for No Bus:target0:0:0 PM: Adding info for No Bus:target0:0:1 PM: Removing info for No Bus:target0:0:1 PM: Adding info for No Bus:target0:0:2 PM: Removing info for No Bus:target0:0:2 PM: Adding info for No Bus:target0:0:3 PM: Removing info for No Bus:target0:0:3 PM: Adding info for No Bus:target0:0:4 PM: Removing info for No Bus:target0:0:4 PM: Adding info for No Bus:target0:0:5 Vendor: EPSON Model: SCANNER GT-5500 Rev: 1.01 Type: Processor ANSI SCSI revision: 02 target0:0:5: Beginning Domain Validation target0:0:5: Ending Domain Validation PM: Adding info for scsi:0:0:5:0 PM: Adding info for No Bus:target0:0:6 PM: Removing info for No Bus:target0:0:6 PM: Adding info for No Bus:target0:0:8 PM: Removing info for No Bus:target0:0:8 PM: Adding info for No Bus:target0:0:9 PM: Removing info for No Bus:target0:0:9 PM: Adding info for No Bus:target0:0:10 PM: Removing info for No Bus:target0:0:10 PM: Adding info for No Bus:target0:0:11 PM: Removing info for No Bus:target0:0:11 PM: Adding info for No Bus:target0:0:12 PM: Removing info for No Bus:target0:0:12 PM: Adding info for No Bus:target0:0:13 PM: Removing info for No Bus:target0:0:13 PM: Adding info for No Bus:target0:0:14 PM: Removing info for No Bus:target0:0:14 PM: Adding info for No Bus:target0:0:15 PM: Removing info for No Bus:target0:0:15 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1152897081.469:2): selinux=0 auid=4294967295 scsi 0:0:5:0: Attached scsi generic sg0 type 3 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 PM: Adding info for platform:floppy.0 dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) PCI: setting IRQ 10 as level-triggered PCI: Found IRQ 10 for device 0000:00:09.0 eth0: Davicom DM9102 at pci0000:00:09.0, 00:60:6e:75:b7:c2, irq 10. Linux Tulip driver version 1.1.13 (May 11, 2002) 8139too Fast Ethernet driver 0.9.27 PCI: setting IRQ 5 as level-triggered PCI: Found IRQ 5 for device 0000:00:08.0 eth1: RealTek RTL8139 at 0xdc88e000, 00:06:7b:08:e6:bb, IRQ 5 eth1: Identified 8139 chip type 'RTL-8100B/8139D' 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) eth1: link up, 10Mbps, half-duplex, lpa 0x0000 PCI: setting IRQ 9 as level-triggered PCI: Found IRQ 9 for device 0000:00:0a.0 PCI: Sharing IRQ 9 with 0000:00:0c.0 PM: Adding info for ac97:0-0:STAC9721,23 gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xb800, speed 1242kHz PM: Adding info for gameport:gameport0 PM: Adding info for No Bus:i2c-9191 PM: Adding info for i2c:9191-6000 parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] parport_pc: VIA parallel port: io=0x378, irq=7 USB Universal Host Controller Interface driver v3.0 PCI: Found IRQ 11 for device 0000:00:07.2 PCI: Sharing IRQ 11 with 0000:00:0b.0 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) eth1: link up, 10Mbps, half-duplex, lpa 0x0000 PCI: setting IRQ 9 as level-triggered PCI: Found IRQ 9 for device 0000:00:0a.0 PCI: Sharing IRQ 9 with 0000:00:0c.0 PM: Adding info for ac97:0-0:STAC9721,23 gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xb800, speed 1242kHz PM: Adding info for gameport:gameport0 PM: Adding info for No Bus:i2c-9191 PM: Adding info for i2c:9191-6000 parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] parport_pc: VIA parallel port: io=0x378, irq=7 USB Universal Host Controller Interface driver v3.0 PCI: Found IRQ 11 for device 0000:00:07.2 PCI: Sharing IRQ 11 with 0000:00:0b.0 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x0000a400 PM: Adding info for usb:usb1 PM: Adding info for No Bus:usbdev1.1_ep00 usb usb1: configuration #1 chosen from 1 choice PM: Adding info for usb:1-0:1.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev1.1_ep81 PM: Adding info for No Bus:usbdev1.1 ieee1394: Initialized config rom entry `ip1394' PCI: Found IRQ 9 for device 0000:00:0c.0 PCI: Sharing IRQ 9 with 0000:00:0a.0 PM: Adding info for ieee1394:fw-host0 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[eb003000-eb0037ff] Max Packet=[2048] IR/IT contexts=[4/8] PM: Adding info for ieee1394:2000000004002f6d ieee1394: Host added: ID:BUS[0-00:1023] GUID[2000000004002f6d] PM: Adding info for ieee1394:2000000004002f6d-0 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com eth0: no IPv6 routers present eth1: no IPv6 routers present EXT3 FS on hdb1, internal journal Adding 915696k swap on /dev/hdb2. Priority:-1 extents:1 across:915696k audit(1152889914.618:3): audit_pid=1990 old=0 by auid=4294967295 lp0: using parport0 (interrupt-driven). lp0: console ready [drm] Initialized drm 1.0.1 20051102 [drm] Initialized radeon 1.25.0 20060524 on minor 0 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [drm] Setting GART location based on old memory map [drm] Loading R200 Microcode [drm] writeback test succeeded in 1 usecs atkbd.c: Unknown key pressed (translated set 2, code 0xbb on isa0060/serio0). atkbd.c: Use 'setkeycodes e03b ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xbb on isa0060/serio0). atkbd.c: Use 'setkeycodes e03b ' to make it known. NET: Registered protocol family 4 NET: Registered protocol family 5 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/