lkml.org 
[lkml]   [2006]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 21 of 39] IB/ipath - fixed bug 9776 for real. The problem was that I was updating
Date
From
the head register multiple times in the rcvhdrq processing loop,
and setting the counter on each update. Since that meant that
the tail register was ahead of head for all but the last update,
we would get extra interrupts. The fix was to not write the
counter value except on the last update.

I also changed to update rcvhdrhead and rcvegrindexhead at most
every 16 packets, if there were lots of packets in the queue
(and of course, on the last packet, regardless).

I also made some small cleanups while debugging this.

With these changes, xeon/monty typically sees two openib packets
per interrupt on sdp and ipoib, opteron/monty is about 1.25 pkts/intr.

I'm seeing about 3800 Mbit/s monty/xeon, and 5000-5100 opteron/monty
with netperf sdp. Netpipe doesn't show as good as that, peaking
at about 4400 on opteron/monty sdp. Plain ipoib xeon is about 2100+
netperf, opteron 2900+, at 128KB

Signed-off-by: olson@eng-12.pathscale.com
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>

diff -r 8bc865893a11 -r 1a4350d895c9 drivers/infiniband/hw/ipath/ipath_driver.c
--- a/drivers/infiniband/hw/ipath/ipath_driver.c Thu Jun 29 14:33:25 2006 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c Thu Jun 29 14:33:26 2006 -0700
@@ -870,7 +870,7 @@ void ipath_kreceive(struct ipath_devdata
const u32 maxcnt = dd->ipath_rcvhdrcnt * rsize; /* words */
u32 etail = -1, l, hdrqtail;
struct ips_message_header *hdr;
- u32 eflags, i, etype, tlen, pkttot = 0;
+ u32 eflags, i, etype, tlen, pkttot = 0, updegr=0;
static u64 totcalls; /* stats, may eventually remove */
char emsg[128];

@@ -884,14 +884,14 @@ void ipath_kreceive(struct ipath_devdata
if (test_and_set_bit(0, &dd->ipath_rcv_pending))
goto bail;

- if (dd->ipath_port0head ==
- (u32)le64_to_cpu(*dd->ipath_hdrqtailptr))
+ l = dd->ipath_port0head;
+ if (l == (u32)le64_to_cpu(*dd->ipath_hdrqtailptr))
goto done;

/* read only once at start for performance */
hdrqtail = (u32)le64_to_cpu(*dd->ipath_hdrqtailptr);

- for (i = 0, l = dd->ipath_port0head; l != hdrqtail; i++) {
+ for (i = 0; l != hdrqtail; i++) {
u32 qp;
u8 *bthbytes;

@@ -1002,15 +1002,26 @@ void ipath_kreceive(struct ipath_devdata
l += rsize;
if (l >= maxcnt)
l = 0;
+ if (etype != RCVHQ_RCV_TYPE_EXPECTED)
+ updegr = 1;
/*
- * update for each packet, to help prevent overflows if we
- * have lots of packets.
+ * update head regs on last packet, and every 16 packets.
+ * Reduce bus traffic, while still trying to prevent
+ * rcvhdrq overflows, for when the queue is nearly full
*/
- (void)ipath_write_ureg(dd, ur_rcvhdrhead,
- dd->ipath_rhdrhead_intr_off | l, 0);
- if (etype != RCVHQ_RCV_TYPE_EXPECTED)
- (void)ipath_write_ureg(dd, ur_rcvegrindexhead,
- etail, 0);
+ if (l == hdrqtail || (i && !(i&0xf))) {
+ u64 lval;
+ if (l == hdrqtail) /* want interrupt only on last */
+ lval = dd->ipath_rhdrhead_intr_off | l;
+ else
+ lval = l;
+ (void)ipath_write_ureg(dd, ur_rcvhdrhead, lval, 0);
+ if (updegr) {
+ (void)ipath_write_ureg(dd, ur_rcvegrindexhead,
+ etail, 0);
+ updegr = 0;
+ }
+ }
}

pkttot += i;
diff -r 8bc865893a11 -r 1a4350d895c9 drivers/infiniband/hw/ipath/ipath_intr.c
--- a/drivers/infiniband/hw/ipath/ipath_intr.c Thu Jun 29 14:33:25 2006 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c Thu Jun 29 14:33:26 2006 -0700
@@ -383,7 +383,7 @@ static unsigned handle_frequent_errors(s
return supp_msgs;
}

-static void handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
+static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
{
char msg[512];
u64 ignore_this_time = 0;
@@ -480,7 +480,7 @@ static void handle_errors(struct ipath_d
INFINIPATH_E_IBSTATUSCHANGED);
}
if (!errs)
- return;
+ return 0;

if (!noprint)
/*
@@ -604,9 +604,7 @@ static void handle_errors(struct ipath_d
wake_up_interruptible(&ipath_sma_state_wait);
}

- if (chkerrpkts)
- /* process possible error packets in hdrq */
- ipath_kreceive(dd);
+ return chkerrpkts;
}

/* this is separate to allow for better optimization of ipath_intr() */
@@ -765,10 +763,10 @@ irqreturn_t ipath_intr(int irq, void *da
irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
{
struct ipath_devdata *dd = data;
- u32 istat;
+ u32 istat, chk0rcv = 0;
ipath_err_t estat = 0;
irqreturn_t ret;
- u32 p0bits;
+ u32 p0bits, oldhead;
static unsigned unexpected = 0;
static const u32 port0rbits = (1U<<INFINIPATH_I_RCVAVAIL_SHIFT) |
(1U<<INFINIPATH_I_RCVURG_SHIFT);
@@ -810,9 +808,8 @@ irqreturn_t ipath_intr(int irq, void *da
* interrupts. We clear the interrupts first so that we don't
* lose intr for later packets that arrive while we are processing.
*/
- if (dd->ipath_port0head !=
- (u32)le64_to_cpu(*dd->ipath_hdrqtailptr)) {
- u32 oldhead = dd->ipath_port0head;
+ oldhead = dd->ipath_port0head;
+ if (oldhead != (u32) le64_to_cpu(*dd->ipath_hdrqtailptr)) {
if (dd->ipath_flags & IPATH_GPIO_INTR) {
ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
(u64) (1 << 2));
@@ -830,6 +827,8 @@ irqreturn_t ipath_intr(int irq, void *da
}

istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
+ p0bits = port0rbits;
+
if (unlikely(!istat)) {
ipath_stats.sps_nullintr++;
ret = IRQ_NONE; /* not our interrupt, or already handled */
@@ -867,10 +866,11 @@ irqreturn_t ipath_intr(int irq, void *da
ipath_dev_err(dd, "Read of error status failed "
"(all bits set); ignoring\n");
else
- handle_errors(dd, estat);
- }
-
- p0bits = port0rbits;
+ if (handle_errors(dd, estat))
+ /* force calling ipath_kreceive() */
+ chk0rcv = 1;
+ }
+
if (istat & INFINIPATH_I_GPIO) {
/*
* Packets are available in the port 0 rcv queue.
@@ -892,8 +892,10 @@ irqreturn_t ipath_intr(int irq, void *da
ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
(u64) (1 << 2));
p0bits |= INFINIPATH_I_GPIO;
- }
- }
+ chk0rcv = 1;
+ }
+ }
+ chk0rcv |= istat & p0bits;

/*
* clear the ones we will deal with on this round
@@ -905,18 +907,16 @@ irqreturn_t ipath_intr(int irq, void *da
ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);

/*
- * we check for both transition from empty to non-empty, and urgent
- * packets (those with the interrupt bit set in the header), and
- * if enabled, the GPIO bit 2 interrupt used for port0 on some
- * HT-400 boards.
- * Do this before checking for pio buffers available, since
- * receives can overflow; piobuf waiters can afford a few
- * extra cycles, since they were waiting anyway.
- */
- if (istat & p0bits) {
+ * handle port0 receive before checking for pio buffers available,
+ * since receives can overflow; piobuf waiters can afford a few
+ * extra cycles, since they were waiting anyway, and user's waiting
+ * for receive are at the bottom.
+ */
+ if (chk0rcv) {
ipath_kreceive(dd);
istat &= ~port0rbits;
}
+
if (istat & ((infinipath_i_rcvavail_mask <<
INFINIPATH_I_RCVAVAIL_SHIFT)
| (infinipath_i_rcvurg_mask <<
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2006-06-29 23:57    [from the cache]
©2003-2011 Jasper Spaans