Messages in this thread | | | Date | Wed, 21 Jun 2006 13:47:27 -0400 | From | "Mike Snitzer" <> | Subject | Re: Wish for 2006 to Alan Cox and Jeff Garzik: A functional Driver for PDC202XX |
| |
On 6/21/06, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote: > Ar Mer, 2006-06-21 am 11:20 -0400, ysgrifennodd Mike Snitzer: > > ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00 > > ata1: status=0x51 { DriveReady SeekComplete Error } > > ata1: error=0x84 { DriveStatusError BadCRC } > > Thats a speed mistune somewhere in the code. > > Can you send me an lspci -vxx and the information on the drive (or > dmesg) with a "normal" kernel boot and I'll hunt it down.
Please see attached for the lspci -vxx output.
Here is the the relevant IDE info from dmesg:
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PDC20267: IDE controller at PCI slot 0000:01:01.0 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10 PDC20267: chipset revision 2 PDC20267: ROM enabled at 0x40000000 PDC20267: 100% native mode on irq 10 PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide0: BM-DMA at 0xdf00-0xdf07, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xdf08-0xdf0f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: SAMSUNG SP0401N, ATA DISK drive ide0 at 0xdef0-0xdef7,0xdeea on irq 10 Probing IDE interface ide1... ICH5: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xffa8-0xffaf, BIOS settings: hde:DMA, hdf:pio Probing IDE interface ide2... hde: GCR-8483B, ATAPI CD/DVD-ROM drive ide2 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide1... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 128KiB hda: Host Protected Area detected. current capacity is 78125000 sectors (40000 MB) native capacity is 78242976 sectors (40060 MB) hda: Host Protected Area disabled. hda: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3
also smartctl info:
=== START OF INFORMATION SECTION === Device Model: SAMSUNG SP0401N Serial Number: S004J10Y647557 Firmware Version: TJ100-28 User Capacity: 40,060,403,712 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is: Wed Jun 21 13:45:56 2006 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled [unhandled content-type:application/x-gzip] | |