This message generated a parse failure. Raw output follows here. Please use 'back' to navigate. From devnull@lkml.org Fri Apr 26 04:18:46 2024 Delivery-date: Mon, 29 May 2006 02:23:01 +0200 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751079AbWE2AVJ (ORCPT ); Sun, 28 May 2006 20:21:09 -0400 Received: from rune.pobox.com ([208.210.124.79]:43926 "EHLO rune.pobox.com") by vger.kernel.org with ESMTP id S1751076AbWE2AVH (ORCPT ); Sun, 28 May 2006 20:21:07 -0400 Received: from rune (localhost [127.0.0.1]) by rune.pobox.com (Postfix) with ESMTP id 9CF5E799F2; Sun, 28 May 2006 20:21:28 -0400 (EDT) Received: from red.pwd.internal (ip68-230-78-84.ph.ph.cox.net [68.230.78.84]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by rune.sasl.smtp.pobox.com (Postfix) with ESMTP id 269AA66D0; Sun, 28 May 2006 20:21:24 -04 Received: from white.pwd.internal ([192.168.1.9]) by red.pwd.internal (8.13.6/8.13.4) with SMTP id k4T0L1vH016361; Sun, 28 May 2006 17:21:01 -0700 Date: Sun, 28 May 2006 17:21:01 -0700 From: Paul Dickson To: Mark Lord Cc: Arjan van de Ven , linux-kernel@vger.kernel.org Subject: Re: Resume stops working between 2.6.16 and 2.6.17-rc1 on Dell Inspiron 6000 Message-Id: <20060528172101.a1b9725e.dickson@permanentmail.com> In-Reply-To: <447A1AEF.3040900@rtr.ca> References: <20060528140238.2c25a805.dickson@permanentmail.com> <1148850683.3074.72.camel@laptopd505.fenrus.org> <20060528142951.2a7417cb.dickson@permanentmail.com> <447A1AEF.3040900@rtr.ca> X-Mailer: Sylpheed version 2.2.4 (GTK+ 2.9.1; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="Multipart=_Sun__28_May_2006_17_21_01_-0700_Dl.PMQwZw/iEr=I0" Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org This is a multi-part message in MIME format. --Multipart=_Sun__28_May_2006_17_21_01_-0700_Dl.PMQwZw/iEr=I0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit On Sun, 28 May 2006 17:49:35 -0400, Mark Lord wrote: > We've just now put out a one-liner patch to libata that fixes > resume on my own Inspiron, and for other machines as well. > > Does it fix the problem here too? (copy of patch is attached) > Yes. I compiled 2.6.17-rc5 without it and verified the problem occurs, then applied the patch and tried it again. This time it worked. I can suspend AND hibernate with the patch. I still get the BUG message on resuming that I reported in bugzilla comment #9: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=185108#c9 It is likely a separate bug. Thanks for the patch! -Paul --Multipart=_Sun__28_May_2006_17_21_01_-0700_Dl.PMQwZw/iEr=I0 Content-Type: text/plain; name="hibernate-dmesg" Content-Disposition: attachment; filename="hibernate-dmesg" Content-Transfer-Encoding: 7bit Linux version 2.6.17-rc5 (dickson@white.pwd.internal) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 Sun May 28 15:48:04 MST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000004f7d3800 (usable) BIOS-e820: 000000004f7d3800 - 0000000050000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved) BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 375MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 325587 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 96211 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 DELL ) @ 0x000fc9b0 ACPI: RSDT (v001 DELL CPi R 0x27d50202 ASL 0x00000061) @ 0x4f7d3fd3 ACPI: FADT (v001 DELL CPi R 0x27d50202 ASL 0x00000061) @ 0x4f7d4c00 ACPI: MADT (v001 DELL CPi R 0x27d50202 ASL 0x00000047) @ 0x4f7d5400 ACPI: MCFG (v016 DELL CPi R 0x27d50202 ASL 0x00000061) @ 0x4f7d53c0 ACPI: BOOT (v001 DELL CPi R 0x27d50202 ASL 0x00000061) @ 0x4f7d4fc0 ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x4f7d43e6 ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x4f7d420e ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030522) @ 0x4f7d4013 ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 60000000 (gap: 50000000:90000000) Built 1 zonelists Kernel command line: ro root=LABEL=/ hda=none hdc=none ide_setup: hda=none ide_setup: hdc=none Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1596.163 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1286020k/1302348k available (1794k kernel code, 15040k reserved, 665k data, 152k init, 384844k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3196.86 BogoMIPS (lpj=6393721) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000 CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 08 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 0k freed ACPI: setting ELCR to 0200 (from 0e80) checking if image is initramfs... it is Freeing initrd memory: 1067k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:00:02.0 PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1080-10bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved pnp: 00:02: ioport range 0x1008-0x100f could not be reserved pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved pnp: 00:03: ioport range 0x1006-0x1007 has been reserved pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved pnp: 00:03: ioport range 0x1060-0x107f has been reserved pnp: 00:03: ioport range 0x1080-0x10bf has been reserved pnp: 00:03: ioport range 0x10c0-0x10df has been reserved pnp: 00:08: ioport range 0x900-0x90f has been reserved pnp: 00:08: ioport range 0x910-0x91f has been reserved pnp: 00:08: ioport range 0x920-0x92f has been reserved pnp: 00:08: ioport range 0x930-0x93f has been reserved pnp: 00:08: ioport range 0x940-0x97f has been reserved pnp: 00:0b: ioport range 0x7b0-0x7bb has been reserved pnp: 00:0b: ioport range 0x7c0-0x7df has been reserved pnp: 00:0b: ioport range 0xbb0-0xbbb has been reserved pnp: 00:0b: ioport range 0xbc0-0xbdf has been reserved pnp: 00:0b: ioport range 0xfb0-0xfbb has been reserved pnp: 00:0b: ioport range 0xfc0-0xfdf has been reserved pnp: 00:0b: ioport range 0x13b0-0x13bb has been reserved pnp: 00:0b: ioport range 0x13c0-0x13df has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Failed to allocate I/O resource #7:1000@10000 for 0000:00:1e.0 PCI: Bus 4, cardbus bridge: 0000:03:01.0 IO window: 00001400-000014ff IO window: 00001800-000018ff PREFETCH window: 60000000-61ffffff MEM window: 62000000-63ffffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: dfd00000-dfdfffff PREFETCH window: 60000000-61ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:03:01.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7 PCI: setting IRQ 7 as level-triggered ACPI: PCI Interrupt 0000:03:01.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Simple Boot Flag at 0x79 set to 0x1 audit: initializing netlink socket (disabled) audit(1148860881.184:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PBTN] ACPI: Sleep Button (CM) [SBTN] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THM] (48 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide0: I/O resource 0x1F0-0x1F7 not free. ide0: ports already in use, skipping probe Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... ide-floppy driver 0.99.newide ACPI: PCI Interrupt 0000:03:01.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7 Yenta: CardBus bridge found at 0000:03:01.0 [1028:0188] Yenta: ISA IRQ mask 0x0c38, PCI irq 7 Socket status: 30000006 pcmcia: parent PCI bridge Memory window: 0xdfd00000 - 0xdfdfffff pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x61ffffff usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI wakeup devices: LID PBTN PCI0 USB0 USB1 USB2 USB4 USB3 MODM PCIE ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 152k freed input: AT Translated Set 2 keyboard as /class/input/input0 SCSI subsystem initialized libata version 1.20 loaded. ata_piix 0000:00:1f.2: version 1.05 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14 input: PS/2 Mouse as /class/input/input1 input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 ata1: dev 0 cfg 49:0f00 82:746b 83:7fe8 84:4023 85:f469 86:3c48 87:4023 88:203f ata1: dev 0 ATA-6, max UDMA/100, 117210240 sectors: LBA48 ata1(0): applying bridge limits ata1: dev 0 configured for UDMA/100 scsi0 : ata_piix Vendor: ATA Model: IC25N060ATMR04-0 Rev: MO3O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: Attached scsi disk sda ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15 ata2: dev 0 cfg 49:0f00 82:0210 83:4011 84:4000 85:0000 86:0001 87:4000 88:0407 ata2: dev 0 ATAPI, max UDMA/33 ata2: dev 0 configured for UDMA/33 scsi1 : ata_piix Vendor: TSSTcorp Model: CDRW/DVD TSL462C Rev: DE01 Type: CD-ROM ANSI SCSI revision: 05 device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000bf60 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000bf40 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 7, io base 0x0000bf20 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected b44.c:v1.00 (Apr 7, 2006) ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 eth0: Broadcom 4400 10/100BaseT Ethernet 00:11:43:76:e0:2c ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 11, io mem 0xffa80800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected sd 0:0:0:0: Attached scsi generic sg0 type 0 1:0:0:0: Attached scsi generic sg1 type 5 ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt 0000:03:01.1[B] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[dfdfc800-dfdfcfff] Max Packet=[2048] IR/IT contexts=[4/4] cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0x100-0x4ff: excluding 0x370-0x377 0x3f0-0x3f7 cs: IO port probe 0xa00-0xaff: clean. hw_random: cannot enable RNG, aborting sr0: scsi3-mmc drive: 10x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ieee1394: Host added: ID:BUS[0-00:1023] GUID[394fc000054a9ce1] ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1e.2 to 64 intel8x0_measure_ac97_clock: measured 55282 usecs intel8x0: clocking to 48000 Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found lp: driver loaded but no devices found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1959920k swap on /dev/sda3. Priority:-1 extents:1 across:1959920k b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. audit(1148860915.205:2): audit_pid=1667 old=0 by auid=4294967295 Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized i915 1.4.0 20060119 on minor 0 NET: Unregistered protocol family 31 ieee1394: Node removed: ID:BUS[0-00:1023] GUID[394fc000054a9ce1] Stopping tasks: ============================================================================================================| Back to C! BUG: sleeping function called from invalid context at mm/slab.c:2794 in_atomic():0, irqs_disabled():1 acpi_os_acquire_object+0xf/0x3c kmem_cache_alloc+0x27/0x7f acpi_os_acquire_object+0xf/0x3c acpi_ut_allocate_object_desc_dbg+0xc/0x40 acpi_ut_create_internal_object_dbg+0x19/0x70 acpi_rs_set_srs_method_data+0x40/0xc5 acpi_pci_link_set+0x3e/0x16d kmem_cache_alloc+0x75/0x7f acpi_pci_link_set+0xf6/0x16d irqrouter_resume+0x34/0x52 __sysdev_resume+0x12/0x55 sysdev_resume+0x16/0x47 device_power_up+0x5/0xa suspend_enter+0x32/0x3a enter_state+0x121/0x13e state_store+0x81/0x94 sysfs_write_file+0xa3/0xc9 vfs_write+0xa2/0x136 sys_write+0x3b/0x64 syscall_call+0x7/0xb ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb1: root hub lost power or was reset PCI: Enabling device 0000:00:1d.1 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb2: root hub lost power or was reset PCI: Enabling device 0000:00:1d.2 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb3: root hub lost power or was reset PCI: Enabling device 0000:00:1d.3 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7 PCI: Setting latency timer of device 0000:00:1d.3 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.7 to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1e.2 to 64 ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt 0000:03:01.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7 ACPI: PCI Interrupt 0000:03:01.1[B] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 pnp: Device 00:04 does not support activation. pnp: Device 00:05 does not support activation. ata1: dev 0 configured for UDMA/100 ata2: dev 0 configured for UDMA/33 Restarting tasks... done ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt 0000:03:01.1[B] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[dfdfc800-dfdfcfff] Max Packet=[2048] IR/IT contexts=[4/4] Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. ieee1394: Host added: ID:BUS[0-00:1023] GUID[394fc000054a9ce1] NET: Unregistered protocol family 31 ieee1394: Node removed: ID:BUS[0-00:1023] GUID[394fc000054a9ce1] Stopping tasks: ==============================================================================================================| Back to C! BUG: sleeping function called from invalid context at mm/slab.c:2794 in_atomic():0, irqs_disabled():1 acpi_os_acquire_object+0xf/0x3c kmem_cache_alloc+0x27/0x7f acpi_os_acquire_object+0xf/0x3c acpi_ut_allocate_object_desc_dbg+0xc/0x40 acpi_ut_create_internal_object_dbg+0x19/0x70 acpi_rs_set_srs_method_data+0x40/0xc5 acpi_pci_link_set+0x3e/0x16d kmem_cache_alloc+0x75/0x7f acpi_pci_link_set+0xf6/0x16d irqrouter_resume+0x34/0x52 __sysdev_resume+0x12/0x55 sysdev_resume+0x16/0x47 device_power_up+0x5/0xa suspend_enter+0x32/0x3a enter_state+0x121/0x13e state_store+0x81/0x94 sysfs_write_file+0xa3/0xc9 vfs_write+0xa2/0x136 sys_write+0x3b/0x64 syscall_call+0x7/0xb ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb1: root hub lost power or was reset PCI: Enabling device 0000:00:1d.1 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb2: root hub lost power or was reset PCI: Enabling device 0000:00:1d.2 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb3: root hub lost power or was reset PCI: Enabling device 0000:00:1d.3 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7 PCI: Setting latency timer of device 0000:00:1d.3 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.7 to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1e.2 to 64 ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt 0000:03:01.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7 ACPI: PCI Interrupt 0000:03:01.1[B] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 pnp: Device 00:04 does not support activation. pnp: Device 00:05 does not support activation. ata1: dev 0 configured for UDMA/100 ata2: dev 0 configured for UDMA/33 Restarting tasks... done ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt 0000:03:01.1[B] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[dfdfc800-dfdfcfff] Max Packet=[2048] IR/IT contexts=[4/4] b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 ieee1394: Host added: ID:BUS[0-00:1023] GUID[394fc000054a9ce1] NET: Unregistered protocol family 31 ieee1394: Node removed: ID:BUS[0-00:1023] GUID[394fc000054a9ce1] Stopping tasks: ============================================================================================================| Shrinking memory... -\done (15972 pages freed) .......... swsusp: Need to copy 73999 pages swsusp: Restoring Highmem BUG: sleeping function called from invalid context at mm/slab.c:2794 in_atomic():0, irqs_disabled():1 acpi_os_acquire_object+0xf/0x3c kmem_cache_alloc+0x27/0x7f acpi_os_acquire_object+0xf/0x3c acpi_ut_allocate_object_desc_dbg+0xc/0x40 acpi_ut_create_internal_object_dbg+0x19/0x70 acpi_rs_set_srs_method_data+0x40/0xc5 acpi_pci_link_set+0x3e/0x16d kmem_cache_alloc+0x75/0x7f acpi_pci_link_set+0xf6/0x16d irqrouter_resume+0x34/0x52 __sysdev_resume+0x12/0x55 sysdev_resume+0x16/0x47 device_power_up+0x5/0xa swsusp_suspend+0x6b/0x83 pm_suspend_disk+0x42/0xc5 enter_state+0x4f/0x13e state_store+0x81/0x94 sysfs_write_file+0xa3/0xc9 vfs_write+0xa2/0x136 sys_write+0x3b/0x64 syscall_call+0x7/0xb irq 11: nobody cared (try booting with the "irqpoll" option) __report_bad_irq+0x2b/0x69 note_interrupt+0x187/0x1b3 handle_IRQ_event+0x22/0x4e __do_IRQ+0x97/0xcb do_IRQ+0x19/0x24 common_interrupt+0x1a/0x20 __xfrm4_bundle_create+0x2c4/0x34b __do_softirq+0x2c/0x7f do_softirq+0x22/0x26 do_IRQ+0x1e/0x24 common_interrupt+0x1a/0x20 cache_alloc_refill+0x2a9/0x5b2 acpi_os_allocate+0x15/0x26 acpi_os_acquire_object+0xf/0x3c kmem_cache_alloc+0x67/0x7f acpi_os_acquire_object+0xf/0x3c acpi_ut_create_generic_state+0xc/0x25 acpi_ns_evaluate_relative+0x47/0xcf acpi_rs_set_srs_method_data+0x9d/0xc5 acpi_pci_link_set+0x3e/0x16d sys_mprotect+0x236/0x45c acpi_pci_link_set+0xf6/0x16d irqrouter_resume+0x34/0x52 __sysdev_resume+0x12/0x55 sysdev_resume+0x16/0x47 device_power_up+0x5/0xa swsusp_suspend+0x6b/0x83 pm_suspend_disk+0x42/0xc5 enter_state+0x4f/0x13e state_store+0x81/0x94 sysfs_write_file+0xa3/0xc9 vfs_write+0xa2/0x136 sys_write+0x3b/0x64 syscall_call+0x7/0xb handlers: [] (usb_hcd_irq+0x0/0x54) [] (usb_hcd_irq+0x0/0x54) Disabling IRQ #11 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb1: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb2: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7 PCI: Setting latency timer of device 0000:00:1d.3 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.7 to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1e.2 to 64 ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt 0000:03:01.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7 ACPI: PCI Interrupt 0000:03:01.1[B] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 pnp: Device 00:04 does not support activation. pnp: Device 00:05 does not support activation. ata1: dev 0 configured for UDMA/100 ata2: dev 0 configured for UDMA/33 Restarting tasks... done ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt 0000:03:01.1[B] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[dfdfc800-dfdfcfff] Max Packet=[2048] IR/IT contexts=[4/4] Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. ieee1394: Host added: ID:BUS[0-00:1023] GUID[394fc000054a9ce1] --Multipart=_Sun__28_May_2006_17_21_01_-0700_Dl.PMQwZw/iEr=I0-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/