lkml.org 
[lkml]   [2006]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] change kbuild to not rely on incorrect GNU make behavior
From
Date
The kbuild system takes advantage of an incorrect behavior in GNU make.
Once this behavior is fixed, all files in the kernel rebuild every time,
even if nothing has changed. This patch ensures kbuild works with both
the incorrect and correct behaviors of GNU make.

For more details on the incorrect behavior, see:

http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html


Changes in this patch:
- Keep all targets that are to be marked .PHONY in a variable, PHONY.
- Add .PHONY: $(PHONY) to mark them properly.
- Remove any $(PHONY) files from the $? list when determining whether
targets are up-to-date or not.


Signed-off-by: Paul Smith <psmith@gnu.org>

---
diff -u -uprN linux-2.6.15-vanilla/Documentation/DocBook/Makefile linux-2.6.15/Documentation/DocBook/Makefile
--- linux-2.6.15-vanilla/Documentation/DocBook/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/Documentation/DocBook/Makefile 2006-03-05 12:34:26.617709252 -0500
@@ -28,7 +28,7 @@ PS_METHOD = $(prefer-db2x)

###
# The targets that may be used.
-.PHONY: xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
+PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs

BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
xmldocs: $(BOOKS)
@@ -211,3 +211,9 @@ clean-dirs := $(patsubst %.xml,%,$(DOCBO

#man put files in man subdir - traverse down
subdir- := man/
+
+
+# Declare the contents of the .PHONY variable as phony. We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
diff -u -uprN linux-2.6.15-vanilla/Makefile linux-2.6.15/Makefile
--- linux-2.6.15-vanilla/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/Makefile 2006-03-05 12:34:26.620707970 -0500
@@ -95,7 +95,7 @@ ifdef O
endif

# That's our default target when none is given on the command line
-.PHONY: _all
+PHONY := _all
_all:

ifneq ($(KBUILD_OUTPUT),)
@@ -106,7 +106,7 @@ KBUILD_OUTPUT := $(shell cd $(KBUILD_OUT
$(if $(KBUILD_OUTPUT),, \
$(error output directory "$(saved-output)" does not exist))

-.PHONY: $(MAKECMDGOALS)
+PHONY += $(MAKECMDGOALS)

$(filter-out _all,$(MAKECMDGOALS)) _all:
$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
@@ -123,7 +123,7 @@ ifeq ($(skip-makefile),)

# If building an external module we do not care about the all: rule
# but instead _all depend on modules
-.PHONY: all
+PHONY += all
ifeq ($(KBUILD_EXTMOD),)
_all: all
else
@@ -380,14 +380,14 @@ export RCS_TAR_IGNORE := --exclude SCCS
# Rules shared between *config targets and build targets

# Basic helpers built in scripts/
-.PHONY: scripts_basic
+PHONY += scripts_basic
scripts_basic:
$(Q)$(MAKE) $(build)=scripts/basic

# To avoid any implicit rule to kick in, define an empty command.
scripts/basic/%: scripts_basic ;

-.PHONY: outputmakefile
+PHONY += outputmakefile
# outputmakefile generate a Makefile to be placed in output directory, if
# using a seperate output directory. This allows convinient use
# of make in output directory
@@ -462,7 +462,7 @@ ifeq ($(KBUILD_EXTMOD),)
# Additional helpers built in scripts/
# Carefully list dependencies so we do not try to build scripts twice
# in parrallel
-.PHONY: scripts
+PHONY += scripts
scripts: scripts_basic include/config/MARKER
$(Q)$(MAKE) $(build)=$(@)

@@ -780,7 +780,7 @@ $(sort $(vmlinux-init) $(vmlinux-main))
# make menuconfig etc.
# Error messages still appears in the original language

-.PHONY: $(vmlinux-dirs)
+PHONY += $(vmlinux-dirs)
$(vmlinux-dirs): prepare scripts
$(Q)$(MAKE) $(build)=$@

@@ -791,10 +791,10 @@ $(vmlinux-dirs): prepare scripts
# version.h and scripts_basic is processed / created.

# Listed in dependency order
-.PHONY: prepare archprepare prepare0 prepare1 prepare2 prepare3
+PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3

# prepare-all is deprecated, use prepare as valid replacement
-.PHONY: prepare-all
+PHONY += prepare-all

# prepare3 is used to check if we are building in a separate output directory,
# and if so do:
@@ -897,7 +897,7 @@ include/linux/version.h: $(srctree)/Make

# ---------------------------------------------------------------------------

-.PHONY: depend dep
+PHONY += depend dep
depend dep:
@echo '*** Warning: make $@ is unnecessary now.'

@@ -912,21 +912,21 @@ all: modules

# Build modules

-.PHONY: modules
+PHONY += modules
modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
@echo ' Building modules, stage 2.';
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost


# Target to prepare building external modules
-.PHONY: modules_prepare
+PHONY += modules_prepare
modules_prepare: prepare scripts

# Target to install modules
-.PHONY: modules_install
+PHONY += modules_install
modules_install: _modinst_ _modinst_post

-.PHONY: _modinst_
+PHONY += _modinst_
_modinst_:
@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
echo "Warning: you may need to install module-init-tools"; \
@@ -953,7 +953,7 @@ depmod_opts :=
else
depmod_opts := -b $(INSTALL_MOD_PATH) -r
endif
-.PHONY: _modinst_post
+PHONY += _modinst_post
_modinst_post: _modinst_
if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi

@@ -996,7 +996,7 @@ clean: rm-dirs := $(CLEAN_DIRS)
clean: rm-files := $(CLEAN_FILES)
clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))

-.PHONY: $(clean-dirs) clean archclean
+PHONY += $(clean-dirs) clean archclean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)

@@ -1014,7 +1014,7 @@ mrproper: rm-dirs := $(wildcard $(MRPRO
mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts)

-.PHONY: $(mrproper-dirs) mrproper archmrproper
+PHONY += $(mrproper-dirs) mrproper archmrproper
$(mrproper-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)

@@ -1024,7 +1024,7 @@ mrproper: clean archmrproper $(mrproper-

# distclean
#
-.PHONY: distclean
+PHONY += distclean

distclean: mrproper
@find $(srctree) $(RCS_FIND_IGNORE) \
@@ -1040,7 +1040,7 @@ distclean: mrproper
# rpm target kept for backward compatibility
package-dir := $(srctree)/scripts/package

-.PHONY: %-pkg rpm
+PHONY += %-pkg rpm

%pkg: FORCE
$(Q)$(MAKE) -f $(package-dir)/Makefile $@
@@ -1131,11 +1131,11 @@ else # KBUILD_EXTMOD

# We are always building modules
KBUILD_MODULES := 1
-.PHONY: crmodverdir
+PHONY += crmodverdir
crmodverdir:
$(Q)mkdir -p $(MODVERDIR)

-.PHONY: $(objtree)/Module.symvers
+PHONY += $(objtree)/Module.symvers
$(objtree)/Module.symvers:
@test -e $(objtree)/Module.symvers || ( \
echo; \
@@ -1144,7 +1144,7 @@ $(objtree)/Module.symvers:
echo )

module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
-.PHONY: $(module-dirs) modules
+PHONY += $(module-dirs) modules
$(module-dirs): crmodverdir $(objtree)/Module.symvers
$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)

@@ -1152,13 +1152,13 @@ modules: $(module-dirs)
@echo ' Building modules, stage 2.';
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost

-.PHONY: modules_install
+PHONY += modules_install
modules_install:
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst

clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))

-.PHONY: $(clean-dirs) clean
+PHONY += $(clean-dirs) clean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)

@@ -1282,7 +1282,7 @@ namespacecheck:
endif #ifeq ($(config-targets),1)
endif #ifeq ($(mixed-targets),1)

-.PHONY: checkstack
+PHONY += checkstack
checkstack:
$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
$(PERL) $(src)/scripts/checkstack.pl $(ARCH)
@@ -1324,4 +1324,11 @@ clean := -f $(if $(KBUILD_SRC),$(srctree

endif # skip-makefile

+PHONY += FORCE
FORCE:
+
+
+# Declare the contents of the .PHONY variable as phony. We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
diff -u -uprN linux-2.6.15-vanilla/arch/arm/Makefile linux-2.6.15/arch/arm/Makefile
--- linux-2.6.15-vanilla/arch/arm/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/arch/arm/Makefile 2006-03-05 12:34:26.621707543 -0500
@@ -1,6 +1,9 @@
#
# arch/arm/Makefile
#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
@@ -172,7 +176,7 @@ endif

archprepare: maketools

-.PHONY: maketools FORCE
+PHONY += maketools FORCE
maketools: include/linux/version.h include/asm-arm/.arch FORCE
$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h

diff -u -uprN linux-2.6.15-vanilla/arch/arm/boot/Makefile linux-2.6.15/arch/arm/boot/Makefile
--- linux-2.6.15-vanilla/arch/arm/boot/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/arch/arm/boot/Makefile 2006-03-05 12:34:26.621707543 -0500
@@ -1,6 +1,9 @@
#
# arch/arm/boot/Makefile
#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
@@ -73,7 +77,7 @@ $(obj)/bootpImage: $(obj)/bootp/bootp FO
$(call if_changed,objcopy)
@echo ' Kernel: $@ is ready'

-.PHONY: initrd FORCE
+PHONY += initrd FORCE
initrd:
@test "$(INITRD_PHYS)" != "" || \
(echo This machine does not support INITRD; exit -1)
diff -u -uprN linux-2.6.15-vanilla/arch/arm/boot/bootp/Makefile linux-2.6.15/arch/arm/boot/bootp/Makefile
--- linux-2.6.15-vanilla/arch/arm/boot/bootp/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/arch/arm/boot/bootp/Makefile 2006-03-05 12:34:26.622707115 -0500
@@ -1,6 +1,9 @@
#
# linux/arch/arm/boot/bootp/Makefile
#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#

LDFLAGS_bootp :=-p --no-undefined -X \
--defsym initrd_phys=$(INITRD_PHYS) \
@@ -21,4 +25,4 @@ $(obj)/kernel.o: arch/arm/boot/zImage FO

$(obj)/initrd.o: $(INITRD) FORCE

-.PHONY: $(INITRD) FORCE
+PHONY += $(INITRD) FORCE
diff -u -uprN linux-2.6.15-vanilla/arch/arm26/Makefile linux-2.6.15/arch/arm26/Makefile
--- linux-2.6.15-vanilla/arch/arm26/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/arch/arm26/Makefile 2006-03-05 12:34:26.635701560 -0500
@@ -1,6 +1,9 @@
#
# arch/arm26/Makefile
#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
@@ -49,9 +53,9 @@ all: zImage

boot := arch/arm26/boot

-.PHONY: maketools FORCE
+PHONY += maketools FORCE
maketools: FORCE
-
+

# Convert bzImage to zImage
bzImage: vmlinux
diff -u -uprN linux-2.6.15-vanilla/arch/arm26/boot/Makefile linux-2.6.15/arch/arm26/boot/Makefile
--- linux-2.6.15-vanilla/arch/arm26/boot/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/arch/arm26/boot/Makefile 2006-03-05 12:34:26.642698569 -0500
@@ -1,6 +1,9 @@
#
# arch/arm26/boot/Makefile
#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
@@ -60,7 +64,7 @@ $(obj)/xipImage: vmlinux FORCE
@echo ' Kernel: $@ is ready'
endif

-.PHONY: initrd
+PHONY += initrd
initrd:
@test "$(INITRD_PHYS)" != "" || \
(echo This machine does not support INITRD; exit -1)
diff -u -uprN linux-2.6.15-vanilla/arch/i386/Makefile linux-2.6.15/arch/i386/Makefile
--- linux-2.6.15-vanilla/arch/i386/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/arch/i386/Makefile 2006-03-05 12:34:26.657692159 -0500
@@ -102,8 +102,8 @@ AFLAGS += $(mflags-y)

boot := arch/i386/boot

-.PHONY: zImage bzImage compressed zlilo bzlilo \
- zdisk bzdisk fdimage fdimage144 fdimage288 install kernel_install
+PHONY += zImage bzImage compressed zlilo bzlilo \
+ zdisk bzdisk fdimage fdimage144 fdimage288 install kernel_install

all: bzImage

diff -u -uprN linux-2.6.15-vanilla/arch/ia64/Makefile linux-2.6.15/arch/ia64/Makefile
--- linux-2.6.15-vanilla/arch/ia64/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/arch/ia64/Makefile 2006-03-05 12:34:26.658691732 -0500
@@ -1,6 +1,9 @@
#
# ia64/Makefile
#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
@@ -67,7 +71,7 @@ drivers-$(CONFIG_OPROFILE) += arch/ia64/

boot := arch/ia64/hp/sim/boot

-.PHONY: boot compressed check
+PHONY += boot compressed check

all: compressed unwcheck

diff -u -uprN linux-2.6.15-vanilla/arch/m32r/Makefile linux-2.6.15/arch/m32r/Makefile
--- linux-2.6.15-vanilla/arch/m32r/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/arch/m32r/Makefile 2006-03-05 12:34:26.658691732 -0500
@@ -1,6 +1,9 @@
#
# m32r/Makefile
#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#

LDFLAGS :=
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
@@ -39,7 +43,7 @@ drivers-$(CONFIG_OPROFILE) += arch/m32r/

boot := arch/m32r/boot

-.PHONY: zImage
+PHONY += zImage

all: zImage

diff -u -uprN linux-2.6.15-vanilla/arch/powerpc/Makefile linux-2.6.15/arch/powerpc/Makefile
--- linux-2.6.15-vanilla/arch/powerpc/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/arch/powerpc/Makefile 2006-03-05 12:34:26.659691305 -0500
@@ -153,7 +153,7 @@ bzImage: zImage

BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm

-.PHONY: $(BOOT_TARGETS)
+PHONY += $(BOOT_TARGETS)

boot := arch/$(ARCH)/boot

diff -u -uprN linux-2.6.15-vanilla/arch/ppc/Makefile linux-2.6.15/arch/ppc/Makefile
--- linux-2.6.15-vanilla/arch/ppc/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/arch/ppc/Makefile 2006-03-05 12:34:26.659691305 -0500
@@ -82,7 +82,7 @@ drivers-$(CONFIG_OPROFILE) += arch/power

BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm

-.PHONY: $(BOOT_TARGETS)
+PHONY += $(BOOT_TARGETS)

all: uImage zImage

diff -u -uprN linux-2.6.15-vanilla/arch/ppc/boot/Makefile linux-2.6.15/arch/ppc/boot/Makefile
--- linux-2.6.15-vanilla/arch/ppc/boot/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/arch/ppc/boot/Makefile 2006-03-05 12:34:26.660690877 -0500
@@ -1,6 +1,9 @@
#
# arch/ppc/boot/Makefile
#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
@@ -25,7 +29,7 @@ subdir- += simple openfirmware

hostprogs-y := $(addprefix utils/, addnote mknote hack-coff mkprep mkbugboot mktree)

-.PHONY: $(BOOT_TARGETS) $(bootdir-y)
+PHONY += $(BOOT_TARGETS) $(bootdir-y)

$(BOOT_TARGETS): $(bootdir-y)

diff -u -uprN linux-2.6.15-vanilla/arch/ppc/boot/openfirmware/Makefile linux-2.6.15/arch/ppc/boot/openfirmware/Makefile
--- linux-2.6.15-vanilla/arch/ppc/boot/openfirmware/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/arch/ppc/boot/openfirmware/Makefile 2006-03-05 12:34:26.669687031 -0500
@@ -1,5 +1,8 @@
# Makefile for making bootable images on various OpenFirmware machines.
#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
# Paul Mackerras January 1997
# XCOFF bootable images for PowerMacs
# Geert Uytterhoeven September 1997
@@ -150,7 +154,7 @@ $(images)/miboot.initrd.image: $(images)

# The targets used on the make command-line

-.PHONY: zImage zImage.initrd
+PHONY += zImage zImage.initrd
zImage: $(images)/vmlinux.coff \
$(images)/vmlinux.elf-pmac \
$(images)/zImage.chrp \
@@ -166,7 +170,7 @@ zImage.initrd: $(images)/vmlinux.initrd

TFTPIMAGE := /tftpboot/zImage

-.PHONY: znetboot znetboot.initrd
+PHONY += znetboot znetboot.initrd
znetboot: $(images)/vmlinux.coff \
$(images)/vmlinux.elf-pmac \
$(images)/zImage.chrp
diff -u -uprN linux-2.6.15-vanilla/arch/sh/Makefile linux-2.6.15/arch/sh/Makefile
--- linux-2.6.15-vanilla/arch/sh/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/arch/sh/Makefile 2006-03-05 12:34:26.670686604 -0500
@@ -146,7 +146,7 @@ endif

archprepare: maketools include/asm-sh/.cpu include/asm-sh/.mach

-.PHONY: maketools FORCE
+PHONY += maketools FORCE
maketools: include/linux/version.h FORCE
$(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h

diff -u -uprN linux-2.6.15-vanilla/arch/um/Makefile linux-2.6.15/arch/um/Makefile
--- linux-2.6.15-vanilla/arch/um/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/arch/um/Makefile 2006-03-05 12:34:26.676684040 -0500
@@ -1,4 +1,7 @@
-#
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
# Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
# Licensed under the GPL
#
@@ -83,7 +87,7 @@ CONFIG_KERNEL_HALF_GIGS ?= 0

SIZE = (($(CONFIG_NEST_LEVEL) + $(CONFIG_KERNEL_HALF_GIGS)) * 0x20000000)

-.PHONY: linux
+PHONY += linux

all: linux

diff -u -uprN linux-2.6.15-vanilla/arch/x86_64/Makefile linux-2.6.15/arch/x86_64/Makefile
--- linux-2.6.15-vanilla/arch/x86_64/Makefile 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/arch/x86_64/Makefile 2006-03-05 12:34:26.676684040 -0500
@@ -62,8 +62,8 @@ drivers-$(CONFIG_OPROFILE) += arch/x86_

boot := arch/x86_64/boot

-.PHONY: bzImage bzlilo install archmrproper \
- fdimage fdimage144 fdimage288 archclean
+PHONY += bzImage bzlilo install archmrproper \
+ fdimage fdimage144 fdimage288 archclean

#Default target when executing "make"
all: bzImage
diff -u -uprN linux-2.6.15-vanilla/scripts/Kbuild.include linux-2.6.15/scripts/Kbuild.include
--- linux-2.6.15-vanilla/scripts/Kbuild.include 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/scripts/Kbuild.include 2006-03-05 12:34:26.000000000 -0500
@@ -73,8 +73,8 @@ echo-cmd = $(if $($(quiet)cmd_$(1)), \
# function to only execute the passed command if necessary
# >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file
# note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars
-#
-if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
+#
+if_changed = $(if $(strip $(filter-out $(PHONY),$?) $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
@set -e; \
$(echo-cmd) \
$(cmd_$(1)); \
@@ -82,7 +82,7 @@ if_changed = $(if $(strip $? $(call arg-

# execute the command and also postprocess generated .d dependencies
# file
-if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
+if_changed_dep = $(if $(strip $(filter-out $(PHONY),$?) $(filter-out FORCE $(wildcard $^),$^)\
$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
@set -e; \
$(echo-cmd) \
@@ -94,6 +94,6 @@ if_changed_dep = $(if $(strip $? $(filte
# Usage: $(call if_changed_rule,foo)
# will check if $(cmd_foo) changed, or any of the prequisites changed,
# and if so will execute $(rule_foo)
-if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
+if_changed_rule = $(if $(strip $(filter-out $(PHONY),$?) $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
@set -e; \
$(rule_$(1)))
diff -u -uprN linux-2.6.15-vanilla/scripts/Makefile.build linux-2.6.15/scripts/Makefile.build
--- linux-2.6.15-vanilla/scripts/Makefile.build 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/scripts/Makefile.build 2006-03-05 12:34:39.859048614 -0500
@@ -4,7 +4,7 @@

src := $(obj)

-.PHONY: __build
+PHONY := __build
__build:

# Read .config if it exist, otherwise ignore
@@ -309,14 +309,14 @@ targets += $(multi-used-y) $(multi-used-
# Descending
# ---------------------------------------------------------------------------

-.PHONY: $(subdir-ym)
+PHONY += $(subdir-ym)
$(subdir-ym):
$(Q)$(MAKE) $(build)=$@

# Add FORCE to the prequisites of a target to force it to be always rebuilt.
# ---------------------------------------------------------------------------

-.PHONY: FORCE
+PHONY += FORCE

FORCE:

@@ -331,3 +331,9 @@ cmd_files := $(wildcard $(foreach f,$(ta
ifneq ($(cmd_files),)
include $(cmd_files)
endif
+
+
+# Declare the contents of the .PHONY variable as phony. We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
diff -u -uprN linux-2.6.15-vanilla/scripts/Makefile.clean linux-2.6.15/scripts/Makefile.clean
--- linux-2.6.15-vanilla/scripts/Makefile.clean 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/scripts/Makefile.clean 2006-03-05 12:34:26.000000000 -0500
@@ -4,7 +4,7 @@

src := $(obj)

-.PHONY: __clean
+PHONY := __clean
__clean:

# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
@@ -87,10 +87,16 @@ endif
# Descending
# ---------------------------------------------------------------------------

-.PHONY: $(subdir-ymn)
+PHONY += $(subdir-ymn)
$(subdir-ymn):
$(Q)$(MAKE) $(clean)=$@

# If quiet is set, only print short version of command

cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
+
+
+# Declare the contents of the .PHONY variable as phony. We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
diff -u -uprN linux-2.6.15-vanilla/scripts/Makefile.modinst linux-2.6.15/scripts/Makefile.modinst
--- linux-2.6.15-vanilla/scripts/Makefile.modinst 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/scripts/Makefile.modinst 2006-03-05 12:34:26.000000000 -0500
@@ -2,7 +2,7 @@
# Installing modules
# ==========================================================================

-.PHONY: __modinst
+PHONY := __modinst
__modinst:

include scripts/Kbuild.include
@@ -12,7 +12,7 @@ include scripts/Kbuild.include
__modules := $(sort $(shell grep -h '\.ko' /dev/null $(wildcard $(MODVERDIR)/*.mod)))
modules := $(patsubst %.o,%.ko,$(wildcard $(__modules:.ko=.o)))

-.PHONY: $(modules)
+PHONY += $(modules)
__modinst: $(modules)
@:

@@ -27,3 +27,9 @@ modinst_dir = $(if $(KBUILD_EXTMOD),$(ex

$(modules):
$(call cmd,modules_install,$(MODLIB)/$(modinst_dir))
+
+
+# Declare the contents of the .PHONY variable as phony. We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
diff -u -uprN linux-2.6.15-vanilla/scripts/Makefile.modpost linux-2.6.15/scripts/Makefile.modpost
--- linux-2.6.15-vanilla/scripts/Makefile.modpost 2006-01-02 22:21:10.000000000 -0500
+++ linux-2.6.15/scripts/Makefile.modpost 2006-03-05 12:34:26.000000000 -0500
@@ -32,7 +32,7 @@
# Step 4 is solely used to allow module versioning in external modules,
# where the CRC of each module is retreived from the Module.symers file.

-.PHONY: _modpost
+PHONY := _modpost
_modpost: __modpost

include .config
@@ -57,7 +57,7 @@ quiet_cmd_modpost = MODPOST
$(if $(KBUILD_EXTMOD),-i,-o) $(symverfile) \
$(filter-out FORCE,$^)

-.PHONY: __modpost
+PHONY += __modpost
__modpost: $(wildcard vmlinux) $(modules:.ko=.o) FORCE
$(call cmd,modpost)

@@ -94,7 +94,7 @@ targets += $(modules)
# Add FORCE to the prequisites of a target to force it to be always rebuilt.
# ---------------------------------------------------------------------------

-.PHONY: FORCE
+PHONY += FORCE

FORCE:

@@ -109,3 +109,9 @@ cmd_files := $(wildcard $(foreach f,$(ta
ifneq ($(cmd_files),)
include $(cmd_files)
endif
+
+
+# Declare the contents of the .PHONY variable as phony. We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)

--
-------------------------------------------------------------------------------
Paul D. Smith <psmith@gnu.org> Find some GNU make tips at:
http://www.gnu.org http://make.paulandlesley.org
"Please remain calm...I may be mad, but I am a professional." --Mad Scientist
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2006-03-05 23:57    [W:0.107 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site