lkml.org 
[lkml]   [2006]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectIDE sysfs corrupted (second IDE channel parent lost) after resume from STR
    Date
    -----BEGIN PGP SIGNED MESSAGE-----
    Hash: SHA1

    This can be reproduced both in 2.6.15.6 and 2.6.16. Toshiba with Ali chipset,
    driver compiled in as module. After system resumed from suspend-to-ram,
    second channel of IDE controller loses its parent.

    Before suspend:

    total 0
    lrwxrwxrwx 1 root root 0 Mar 25 10:38 0.0
    - -> ../../../devices/pci0000:00/0000:00:04.0/ide0/0.0/
    lrwxrwxrwx 1 root root 0 Mar 25 10:38 1.0
    - -> ../../../devices/pci0000:00/0000:00:04.0/ide1/1.0/

    After resume:

    total 0
    lrwxrwxrwx 1 root root 0 Mar 25 10:38 0.0
    - -> ../../../devices/pci0000:00/0000:00:04.0/ide0/0.0/
    lrwxrwxrwx 1 root root 0 Mar 25 10:41 1.0 -> ../../../devices/ide1/1.0/

    I include dmesg output from 2.6.16; it can be seen that at least for second
    channel probe_hwif() is called but apparently at this time it does not have
    proper ->pci_dev set; I could find call chain that would have lead to this.

    Please let me know if more information (like config or lspci) are needed.
    Kernel does not contain binary drivers :)

    Regards

    - -andreyLinux version 2.6.16-2avb (bor@cooker.home.net) (gcc version 4.0.3
    (4.0.3-1mdk for Mandriva Linux release 2006.1)) #4 Tue Mar 21 22:26:51 MSK
    2006
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
    BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
    BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001ef60000 (usable)
    BIOS-e820: 000000001ef60000 - 000000001ef70000 (ACPI data)
    BIOS-e820: 000000001ef70000 - 0000000020000000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    495MB LOWMEM available.
    On node 0 totalpages: 126816
    DMA zone: 4096 pages, LIFO batch:0
    DMA32 zone: 0 pages, LIFO batch:0
    Normal zone: 122720 pages, LIFO batch:31
    HighMem zone: 0 pages, LIFO batch:0
    DMI 2.3 present.
    ACPI: RSDP (v000 TOSHIB ) @ 0x000f0090
    ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef60000
    ACPI: FADT (v002 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef60054
    ACPI: DSDT (v001 TOSHIB 4000 0x20020417 MSFT 0x0100000a) @ 0x00000000
    ACPI: PM-Timer IO Port: 0xee08
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    Built 1 zonelists
    Kernel command line: root=/dev/hda2 pinit hdc=ide-cd resume=/dev/hda1
    splash=silent elevator=cfq vga=791
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffd000 (013e2000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 32768 bytes)
    Detected 747.770 MHz processor.
    Using pmtmr for high-res timesource
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 498992k/507264k available (1885k kernel code, 7628k reserved, 565k
    data, 196k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 1498.62 BogoMIPS
    (lpj=2997249)
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000
    00000000 00000000 00000000
    CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000
    00000000 00000000
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    CPU serial number disabled.
    CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000
    00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU: Intel Pentium III (Coppermine) stepping 0a
    Checking 'hlt' instruction... OK.
    ACPI: setting ELCR to 0200 (from 0a00)
    checking if image is initramfs...it isn't (no cpio magic); looks like an
    initrd
    Freeing initrd memory: 324k freed
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfe5ae, last bus=5
    PCI: Using configuration type 1
    ACPI: Subsystem revision 20060127
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
    PCI quirk: region ee00-ee3f claimed by ali7101 ACPI
    PCI quirk: region ef00-ef1f claimed by ali7101 SMB
    Boot video device is 0000:01:00.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: Power Resource [PFAN] (off)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 12 devices
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    PCI: Bridge: 0000:00:01.0
    IO window: disabled.
    MEM window: f7f00000-fdffffff
    PREFETCH window: 3c000000-3c0fffff
    PCI: Bus 2, cardbus bridge: 0000:00:10.0
    IO window: 00001000-000010ff
    IO window: 00001400-000014ff
    PREFETCH window: 30000000-31ffffff
    MEM window: 32000000-33ffffff
    PCI: Bus 6, cardbus bridge: 0000:00:11.0
    IO window: 00001800-000018ff
    IO window: 00001c00-00001cff
    PREFETCH window: 34000000-35ffffff
    MEM window: 36000000-37ffffff
    PCI: Bus 10, cardbus bridge: 0000:00:11.1
    IO window: 00002000-000020ff
    IO window: 00002400-000024ff
    PREFETCH window: 38000000-39ffffff
    MEM window: 3a000000-3bffffff
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    PCI: Enabling device 0000:00:10.0 (0000 -> 0003)
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 11 (level, low) ->
    IRQ 11
    PCI: Enabling device 0000:00:11.0 (0000 -> 0003)
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
    IRQ 11
    PCI: Enabling device 0000:00:11.1 (0000 -> 0003)
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:11.1[B] -> Link [LNKB] -> GSI 11 (level, low) ->
    IRQ 11
    audit: initializing netlink socket (disabled)
    audit(1143268855.064:1): initialized
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Initializing Cryptographic API
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Activating ISA DMA hang workarounds.
    vesafb: framebuffer at 0xfc000000, mapped to 0xdf880000, using 3072k, total
    16384k
    vesafb: mode is 1024x768x16, linelength=2048, pages=9
    vesafb: protected mode interface info at c000:775e
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    Real Time Clock Driver v1.12ac
    PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
    mice: PS/2 mouse device common for all mice
    md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 4.39
    NET: Registered protocol family 2
    input: AT Translated Set 2 keyboard as /class/input/input0
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 6, 262144 bytes)
    TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    TCP bic registered
    NET: Registered protocol family 1
    Using IPI Shortcut mode
    swsusp: Resume From Partition /dev/hda1
    PM: Checking swsusp image.
    swsusp: Error -6 check for resume file
    PM: Resume from disk failed.
    ACPI wakeup devices:
    COM USB1 ASND VIY0 VIY1 LAN MPC0 MPC1 NOV0 LID
    ACPI: (supports S0 S3 S4 S5)
    BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    RAMDISK: Compressed image found at block 0
    VFS: Mounted root (ext2 filesystem).
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ALI15X3: IDE controller at PCI slot 0000:00:04.0
    ACPI: PCI Interrupt 0000:00:04.0[A]: no GSI
    ALI15X3: chipset revision 195
    ALI15X3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xeff0-0xeff7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xeff8-0xefff, BIOS settings: hdc:DMA, hdd:pio
    Probing IDE interface ide0...
    hda: IC25N020ATDA04-0, ATA DISK drive
    input: ImPS/2 Generic Wheel Mouse as /class/input/input1
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: max request size: 128KiB
    hda: 39070080 sectors (20003 MB) w/1806KiB Cache, CHS=38760/16/63, UDMA(33)
    hda: cache flushes not supported
    hda: hda1 hda2
    ReiserFS: hda2: found reiserfs format "3.6" with standard journal
    ReiserFS: hda2: using ordered data mode
    ReiserFS: hda2: journal params: device hda2, size 8192, journal first block
    18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hda2: checking transaction log (hda2)
    ReiserFS: hda2: Using r5 hash to sort names
    Freeing unused kernel memory: 196k freed
    Write protecting the kernel read-only data: 266k
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKG] -> GSI 11 (level, low) ->
    IRQ 11
    ohci_hcd 0000:00:02.0: OHCI Host Controller
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:02.0: irq 11, io mem 0xf7eff000
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 3 ports detected
    ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 11 (level, low) ->
    IRQ 11
    Yenta: CardBus bridge found at 0000:00:10.0 [12a3:ab01]
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:10.0, mfunc 0x01000002, devctl 0x60
    Yenta: ISA IRQ mask 0x0000, PCI irq 11
    Socket status: 30000059
    ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
    IRQ 11
    Yenta: CardBus bridge found at 0000:00:11.0 [1179:0001]
    Yenta: ISA IRQ mask 0x04b8, PCI irq 11
    Socket status: 30000007
    pccard: PCMCIA card inserted into slot 0
    cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff 0xe0000-0xfffff
    cs: memory probe 0x60000000-0x60ffffff: clean.
    cs: memory probe 0xa0000000-0xa0ffffff: clean.
    pcmcia: registering new device pcmcia0.0
    ACPI: PCI Interrupt 0000:00:11.1[B] -> Link [LNKB] -> GSI 11 (level, low) ->
    IRQ 11
    Yenta: CardBus bridge found at 0000:00:11.1 [1179:0001]
    wlags49_h1_cs v7.18 for PCMCIA, 03/31/2004 14:31:00 by Agere Systems,
    http://www.agere.com
    *** Modified for kernel 2.6 by Andrey Borzenkov <arvidjaar@mail.ru> $Revision:
    19 $
    *** Station Mode (STA) Support: YES
    *** Access Point Mode (AP) Support: YES
    eth0: PRI 31 variant 2 version 9.48
    eth0: NIC 5 variant 2 version 1.02
    eth0: Wireless, io_addr 0x100, irq 11, mac_address 00:02:2D:26:95:6C
    Yenta: ISA IRQ mask 0x04b8, PCI irq 11
    Socket status: 30000007
    ts: Compaq touchscreen protocol output
    Linux agpgart interface v0.101 (c) Dave Jones
    agpgart: Detected ALi M1644 chipset
    agpgart: AGP aperture is 64M @ 0xf0000000
    ACPI: AC Adapter [ADP1] (on-line)
    ACPI: Battery Slot [BAT1] (battery present)
    ACPI: Battery Slot [BAT2] (battery absent)
    ACPI: Power Button (FF) [PWRF]
    ACPI: Lid Switch [LID]
    ACPI: Fan [FAN] (off)
    ACPI: CPU0 (power states: C1[C1] C2[C2])
    ACPI: Thermal Zone [THRM] (49 C)
    toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18
    toshiba_acpi: HCI method: \_SB_.VALD.GHCI
    ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
    Adding 500432k swap on /dev/hda1. Priority:-1 extents:1 across:500432k
    loop: loaded (max 8 devices)
    hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
    ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 11 (level, low) ->
    IRQ 11
    NET: Registered protocol family 17
    pcmcia: Detected deprecated PCMCIA ioctl usage.
    pcmcia: This interface will soon be removed from the kernel; please expect
    breakage unless you upgrade to new tools.
    pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html
    for details.
    e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
    e100: Copyright(c) 1999-2005 Intel Corporation
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 11 (level, low) ->
    IRQ 11
    e100: eth0: e100_probe: addr 0xf7efd000, irq 11, MAC addr 00:00:39:D7:14:A1
    eth1: PRI 31 variant 2 version 9.48
    eth1: NIC 5 variant 2 version 1.02
    eth1: PRI 31 variant 2 version 9.48
    eth1: NIC 5 variant 2 version 1.02
    eth1: PRI 31 variant 2 version 9.48
    eth1: NIC 5 variant 2 version 1.02
    i2c_adapter i2c-0: Error: command never completed
    i2c_adapter i2c-0: Adapter hung, retrying after reset
    i2c_adapter i2c-0: Error: command never completed
    i2c_adapter i2c-0: Adapter hung, retrying after reset
    i2c_adapter i2c-0: Error: command never completed
    i2c_adapter i2c-0: Adapter hung, retrying after reset
    ========== suspend start ======================
    ACPI: PCI interrupt for device 0000:00:06.0 disabled
    ACPI: PCI interrupt for device 0000:00:0a.0 disabled
    e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
    e100: Copyright(c) 1999-2005 Intel Corporation
    ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 11 (level, low) ->
    IRQ 11
    e100: eth0: e100_probe: addr 0xf7efd000, irq 11, MAC addr 00:00:39:D7:14:A1
    pccard: card ejected from slot 0
    PM: Preparing system for mem sleep
    Stopping tasks:
    ==================================================================================|
    pnp: Device 00:09 disabled.
    ACPI: PCI interrupt for device 0000:00:11.1 disabled
    ACPI: PCI interrupt for device 0000:00:11.0 disabled
    ACPI: PCI interrupt for device 0000:00:10.0 disabled
    ACPI: PCI interrupt for device 0000:00:0a.0 disabled
    ACPI: PCI interrupt for device 0000:00:02.0 disabled
    PM: Entering mem sleep
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Back to C!
    Debug: sleeping function called from invalid context
    at /home/bor/src/linux-git/mm/slab.c:2729
    in_atomic():0, irqs_disabled():1
    [<c0104213>] show_trace+0x13/0x20
    [<c010423e>] dump_stack+0x1e/0x20
    [<c0116032>] __might_sleep+0xa2/0xc0
    [<c015c533>] kmem_cache_alloc+0x53/0x70
    [<c01f2a53>] acpi_os_acquire_object+0x11/0x41
    [<c020843f>] acpi_ut_allocate_object_desc_dbg+0xf/0x44
    [<c02084cb>] acpi_ut_create_internal_object_dbg+0x16/0x6a
    [<c0204807>] acpi_rs_set_srs_method_data+0x40/0xb9
    [<c0203f05>] acpi_set_current_resources+0x23/0x2e
    [<c020bd7b>] acpi_pci_link_set+0xff/0x17b
    [<c020be2e>] irqrouter_resume+0x37/0x56
    [<c0236b8a>] __sysdev_resume+0x1a/0x90
    [<c0236c47>] sysdev_resume+0x47/0x70
    [<c023c648>] device_power_up+0x8/0x10
    [<c0138b7a>] enter_state+0x1ba/0x220
    [<c0138c77>] state_store+0x97/0xb0
    [<c01a188e>] subsys_attr_store+0x2e/0x30
    [<c01a1e63>] sysfs_write_file+0xb3/0x100
    [<c015fe57>] vfs_write+0xa7/0x190
    [<c0160867>] sys_write+0x47/0x70
    [<c0102f07>] sysenter_past_esp+0x54/0x75
    PM: Finishing wakeup.
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKG] -> GSI 11 (level, low) ->
    IRQ 11
    ACPI: PCI Interrupt 0000:00:04.0[A]: no GSI
    ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 11 (level, low) ->
    IRQ 11
    pccard: PCMCIA card inserted into slot 0
    pcmcia: registering new device pcmcia0.0
    eth1: PRI 31 variant 2 version 9.48
    eth1: NIC 5 variant 2 version 1.02
    eth1: Wireless, io_addr 0x100, irq 11, mac_address 00:02:2D:26:95:6C
    ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
    IRQ 11
    ACPI: PCI Interrupt 0000:00:11.1[B] -> Link [LNKB] -> GSI 11 (level, low) ->
    IRQ 11
    pnp: Failed to activate device 00:05.
    pnp: Failed to activate device 00:06.
    pnp: Device 00:09 activated.
    usb usb1: root hub lost power or was reset
    Restarting tasks... done
    eth1: PRI 31 variant 2 version 9.48
    eth1: NIC 5 variant 2 version 1.02
    eth1: PRI 31 variant 2 version 9.48
    eth1: NIC 5 variant 2 version 1.02
    eth1: PRI 31 variant 2 version 9.48
    eth1: NIC 5 variant 2 version 1.02
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    NFSD: starting 90-second grace period
    NET: Registered protocol family 23
    ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 11 (level, low) ->
    IRQ 11
    Probing IDE interface ide1...
    hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    hdc: ATAPI 24X DVD-ROM drive, 128kB Cache
    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.4.2.2 (GNU/Linux)

    iD8DBQFEJPZvR6LMutpd94wRAoLqAJ0UxvE3WGtDsreVeql2xhAmpmKHbgCgxiDh
    kspfyJ6bWdSfXrfsLuyGAC0=
    =vbuO
    -----END PGP SIGNATURE-----
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2006-03-25 08:55    [W:0.044 / U:29.892 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site