lkml.org 
[lkml]   [2006]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subjectlibata PATA patch for 2.6.16-rc5
Date
Hi Alan,

2.6.16-rc4-ide2 correctly identified my HP Colorado tape drive (which
I haven't had a chance to use yet...), but 2.6.16-rc5-ide1 doesn't at
all:

[4294687.689000] pata_via 0000:00:0f.1: version 0.1.4
[4294687.689000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -
> GSI 20 (level, low) -> IRQ 177
[4294687.689000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 1
[4294687.689000] ata5: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma
0xD000 irq 14
[4294687.841000] via_do_set_mode: Mode=8 ast broken=Y udma=133 mul=4
[4294688.021000] ata5: dev 0 cfg 49:0f00 82:0218 83:4000 84:4000
85:0218 86:0000 87:4000 88:101f
[4294688.021000] ata5: dev 0 ATAPI, max UDMA/66
[4294688.021000] via_do_set_mode: Mode=8 ast broken=Y udma=133 mul=4
[4294688.021000] via_do_set_mode: Mode=12 ast broken=Y udma=133 mul=4
[4294688.021000] via_do_set_mode: Mode=68 ast broken=Y udma=133 mul=4
[4294688.021000] ata5: dev 0 configured for UDMA/66
[4294688.021000] scsi4 : pata_via
[4294688.027000] Vendor: PIONEER Model: DVD-RW DVR-110D Rev: 1.39
[4294688.027000] Type: CD-ROM ANSI
SCSI revision: 05
[4294688.127000] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2
cdda tray
[4294688.127000] Uniform CD-ROM driver Revision: 3.20
[4294688.128000] sr 4:0:0:0: Attached scsi CD-ROM sr0
[4294688.128000] sr 4:0:0:0: Attached scsi generic sg4 type 5
[4294688.128000] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma
0xD008 irq 15
[4294688.588000] via_do_set_mode: Mode=8 ast broken=Y udma=133 mul=4
[4294688.745000] ata6: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000
85:0000 86:0000 87:0000 88:0000
[4294688.745000] ata6: dev 0 ATAPI, max MWDMA2
[4294688.745000] via_do_set_mode: Mode=8 ast broken=Y udma=133 mul=4
[4294688.785000] usb 1-1: new low speed USB device using uhci_hcd and
address 4
[4294688.896000] ata6: PIO error
[4294688.896000] via_do_set_mode: Mode=12 ast broken=Y udma=133 mul=4
[4294688.896000] via_do_set_mode: Mode=34 ast broken=Y udma=133 mul=4
[4294688.896000] ata6: dev 0 configured for MWDMA2
[4294688.896000] scsi5 : pata_via

I'm guessing it's the PIO error, but I really don't have a clue.

HTH,
Chris

--
Chris Boot
bootc@bootc.net
http://www.bootc.net/


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-03-01 00:45    [W:0.069 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site