lkml.org 
[lkml]   [2006]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [patch 1/5] MMC OMAP driver
On Wed, Feb 01, 2006 at 11:47:25AM -0800, Tony Lindgren wrote:
> * Russell King <rmk+lkml@arm.linux.org.uk> [060201 04:44]:
> > I'm thinking we want a couple of helper functions:
> >
> > mmc_resp_type(cmd)
> > mmc_cmd_type(cmd)
> >
> > which would allow the flags value to be tested for response and command
> > types - in which case we'd need to also have MMC_CMD_DATA as well. For
> > an example of what I'm proposing, see the end of this message.
>
> That sounds like a good solution.

Here's a revised patch. Pierre - could you look at the missing command
types marked with /* ? */ in this patch please?

diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
--- a/drivers/mmc/au1xmmc.c
+++ b/drivers/mmc/au1xmmc.c
@@ -194,7 +194,7 @@ static int au1xmmc_send_command(struct a

u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);

- switch(cmd->flags) {
+ switch (mmc_rsp_type(cmd->flags)) {
case MMC_RSP_R1:
mmccmd |= SD_CMD_RT_1;
break;
@@ -483,34 +483,35 @@ static void au1xmmc_cmd_complete(struct
cmd = mrq->cmd;
cmd->error = MMC_ERR_NONE;

- if ((cmd->flags & MMC_RSP_MASK) == MMC_RSP_SHORT) {
-
- /* Techincally, we should be getting all 48 bits of the response
- * (SD_RESP1 + SD_RESP2), but because our response omits the CRC,
- * our data ends up being shifted 8 bits to the right. In this case,
- * that means that the OSR data starts at bit 31, so we can just
- * read RESP0 and return that
- */
-
- cmd->resp[0] = au_readl(host->iobase + SD_RESP0);
- }
- else if ((cmd->flags & MMC_RSP_MASK) == MMC_RSP_LONG) {
- u32 r[4];
- int i;
-
- r[0] = au_readl(host->iobase + SD_RESP3);
- r[1] = au_readl(host->iobase + SD_RESP2);
- r[2] = au_readl(host->iobase + SD_RESP1);
- r[3] = au_readl(host->iobase + SD_RESP0);
-
- /* The CRC is omitted from the response, so really we only got
- * 120 bytes, but the engine expects 128 bits, so we have to shift
- * things up
- */
-
- for(i = 0; i < 4; i++) {
- cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8;
- if (i != 3) cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24;
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136) {
+ u32 r[4];
+ int i;
+
+ r[0] = au_readl(host->iobase + SD_RESP3);
+ r[1] = au_readl(host->iobase + SD_RESP2);
+ r[2] = au_readl(host->iobase + SD_RESP1);
+ r[3] = au_readl(host->iobase + SD_RESP0);
+
+ /* The CRC is omitted from the response, so really
+ * we only got 120 bytes, but the engine expects
+ * 128 bits, so we have to shift things up
+ */
+
+ for(i = 0; i < 4; i++) {
+ cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8;
+ if (i != 3)
+ cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24;
+ }
+ } else {
+ /* Techincally, we should be getting all 48 bits of
+ * the response (SD_RESP1 + SD_RESP2), but because
+ * our response omits the CRC, our data ends up
+ * being shifted 8 bits to the right. In this case,
+ * that means that the OSR data starts at bit 31,
+ * so we can just read RESP0 and return that
+ */
+ cmd->resp[0] = au_readl(host->iobase + SD_RESP0);
}
}

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -211,7 +211,7 @@ int mmc_wait_for_app_cmd(struct mmc_host

appcmd.opcode = MMC_APP_CMD;
appcmd.arg = rca << 16;
- appcmd.flags = MMC_RSP_R1;
+ appcmd.flags = MMC_RSP_R1 | MMC_CMD_AC; /* ? */
appcmd.retries = 0;
memset(appcmd.resp, 0, sizeof(appcmd.resp));
appcmd.data = NULL;
@@ -331,7 +331,7 @@ static int mmc_select_card(struct mmc_ho

cmd.opcode = MMC_SELECT_CARD;
cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;

err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
if (err != MMC_ERR_NONE)
@@ -358,7 +358,7 @@ static int mmc_select_card(struct mmc_ho
struct mmc_command cmd;
cmd.opcode = SD_APP_SET_BUS_WIDTH;
cmd.arg = SD_BUS_WIDTH_4;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R1; /* ? */

err = mmc_wait_for_app_cmd(host, card->rca, &cmd,
CMD_RETRIES);
@@ -386,7 +386,7 @@ static void mmc_deselect_cards(struct mm

cmd.opcode = MMC_SELECT_CARD;
cmd.arg = 0;
- cmd.flags = MMC_RSP_NONE;
+ cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;

mmc_wait_for_cmd(host, &cmd, 0);
}
@@ -677,7 +677,7 @@ static void mmc_idle_cards(struct mmc_ho

cmd.opcode = MMC_GO_IDLE_STATE;
cmd.arg = 0;
- cmd.flags = MMC_RSP_NONE;
+ cmd.flags = MMC_RSP_NONE | MMC_CMD_BC;

mmc_wait_for_cmd(host, &cmd, 0);

@@ -738,7 +738,7 @@ static int mmc_send_op_cond(struct mmc_h

cmd.opcode = MMC_SEND_OP_COND;
cmd.arg = ocr;
- cmd.flags = MMC_RSP_R3;
+ cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;

for (i = 100; i; i--) {
err = mmc_wait_for_cmd(host, &cmd, 0);
@@ -766,7 +766,7 @@ static int mmc_send_app_op_cond(struct m

cmd.opcode = SD_APP_OP_COND;
cmd.arg = ocr;
- cmd.flags = MMC_RSP_R3;
+ cmd.flags = MMC_RSP_R3; /* ? */

for (i = 100; i; i--) {
err = mmc_wait_for_app_cmd(host, 0, &cmd, CMD_RETRIES);
@@ -805,7 +805,7 @@ static void mmc_discover_cards(struct mm

cmd.opcode = MMC_ALL_SEND_CID;
cmd.arg = 0;
- cmd.flags = MMC_RSP_R2;
+ cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR;

err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
if (err == MMC_ERR_TIMEOUT) {
@@ -835,7 +835,7 @@ static void mmc_discover_cards(struct mm

cmd.opcode = SD_SEND_RELATIVE_ADDR;
cmd.arg = 0;
- cmd.flags = MMC_RSP_R6;
+ cmd.flags = MMC_RSP_R6; /* ? */

err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
if (err != MMC_ERR_NONE)
@@ -856,7 +856,7 @@ static void mmc_discover_cards(struct mm
} else {
cmd.opcode = MMC_SET_RELATIVE_ADDR;
cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;

err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
if (err != MMC_ERR_NONE)
@@ -878,7 +878,7 @@ static void mmc_read_csds(struct mmc_hos

cmd.opcode = MMC_SEND_CSD;
cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R2;
+ cmd.flags = MMC_RSP_R2 | MMC_CMD_AC;

err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
if (err != MMC_ERR_NONE) {
@@ -920,7 +920,7 @@ static void mmc_read_scrs(struct mmc_hos

cmd.opcode = MMC_APP_CMD;
cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; /* ? */

err = mmc_wait_for_cmd(host, &cmd, 0);
if ((err != MMC_ERR_NONE) || !(cmd.resp[0] & R1_APP_CMD)) {
@@ -932,7 +932,7 @@ static void mmc_read_scrs(struct mmc_hos

cmd.opcode = SD_APP_SEND_SCR;
cmd.arg = 0;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R1; /* ? */

memset(&data, 0, sizeof(struct mmc_data));

@@ -1003,7 +1003,7 @@ static void mmc_check_cards(struct mmc_h

cmd.opcode = MMC_SEND_STATUS;
cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;

err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
if (err == MMC_ERR_NONE)
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -171,14 +171,14 @@ static int mmc_blk_issue_rq(struct mmc_q
brq.mrq.data = &brq.data;

brq.cmd.arg = req->sector << 9;
- brq.cmd.flags = MMC_RSP_R1;
+ brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
brq.data.timeout_ns = card->csd.tacc_ns * 10;
brq.data.timeout_clks = card->csd.tacc_clks * 10;
brq.data.blksz_bits = md->block_bits;
brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
brq.stop.opcode = MMC_STOP_TRANSMISSION;
brq.stop.arg = 0;
- brq.stop.flags = MMC_RSP_R1B;
+ brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC;

if (rq_data_dir(req) == READ) {
brq.cmd.opcode = brq.data.blocks > 1 ? MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK;
@@ -223,7 +223,7 @@ static int mmc_blk_issue_rq(struct mmc_q

cmd.opcode = MMC_SEND_STATUS;
cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, 5);
if (err) {
printk(KERN_ERR "%s: error %d requesting status\n",
@@ -430,7 +430,7 @@ mmc_blk_set_blksize(struct mmc_blk_data
mmc_card_claim_host(card);
cmd.opcode = MMC_SET_BLOCKLEN;
cmd.arg = 1 << md->block_bits;
- cmd.flags = MMC_RSP_R1;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, 5);
mmc_card_release_host(card);

diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c
--- a/drivers/mmc/mmci.c
+++ b/drivers/mmc/mmci.c
@@ -124,15 +124,10 @@ mmci_start_command(struct mmci_host *hos
}

c |= cmd->opcode | MCI_CPSM_ENABLE;
- switch (cmd->flags & MMC_RSP_MASK) {
- case MMC_RSP_NONE:
- default:
- break;
- case MMC_RSP_LONG:
- c |= MCI_CPSM_LONGRSP;
- case MMC_RSP_SHORT:
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136)
+ c |= MCI_CPSM_LONGRSP;
c |= MCI_CPSM_RESPONSE;
- break;
}
if (/*interrupt*/0)
c |= MCI_CPSM_INTERRUPT;
diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c
--- a/drivers/mmc/pxamci.c
+++ b/drivers/mmc/pxamci.c
@@ -178,14 +178,15 @@ static void pxamci_start_cmd(struct pxam
if (cmd->flags & MMC_RSP_BUSY)
cmdat |= CMDAT_BUSY;

- switch (cmd->flags & (MMC_RSP_MASK | MMC_RSP_CRC)) {
- case MMC_RSP_SHORT | MMC_RSP_CRC:
+#define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
+ switch (RSP_TYPE(mmc_resp_type(cmd))) {
+ case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6 */
cmdat |= CMDAT_RESP_SHORT;
break;
- case MMC_RSP_SHORT:
+ case RSP_TYPE(MMC_RSP_R3):
cmdat |= CMDAT_RESP_R3;
break;
- case MMC_RSP_LONG | MMC_RSP_CRC:
+ case RSP_TYPE(MMC_RSP_R2):
cmdat |= CMDAT_RESP_R2;
break;
default:
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -459,7 +459,7 @@ static void wbsd_send_command(struct wbs
/*
* Do we expect a reply?
*/
- if ((cmd->flags & MMC_RSP_MASK) != MMC_RSP_NONE) {
+ if (cmd->flags & MMC_RSP_PRESENT) {
/*
* Read back status.
*/
@@ -476,10 +476,10 @@ static void wbsd_send_command(struct wbs
cmd->error = MMC_ERR_BADCRC;
/* All ok */
else {
- if ((cmd->flags & MMC_RSP_MASK) == MMC_RSP_SHORT)
- wbsd_get_short_reply(host, cmd);
- else
+ if (cmd->flags & MMC_RSP_136)
wbsd_get_long_reply(host, cmd);
+ else
+ wbsd_get_short_reply(host, cmd);
}
}

diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -21,24 +21,35 @@ struct mmc_command {
u32 arg;
u32 resp[4];
unsigned int flags; /* expected response type */
-#define MMC_RSP_NONE (0 << 0)
-#define MMC_RSP_SHORT (1 << 0)
-#define MMC_RSP_LONG (2 << 0)
-#define MMC_RSP_MASK (3 << 0)
-#define MMC_RSP_CRC (1 << 3) /* expect valid crc */
-#define MMC_RSP_BUSY (1 << 4) /* card may send busy */
-#define MMC_RSP_OPCODE (1 << 5) /* response contains opcode */
+#define MMC_RSP_PRESENT (1 << 0)
+#define MMC_RSP_136 (1 << 1) /* 136 bit response */
+#define MMC_RSP_CRC (1 << 2) /* expect valid crc */
+#define MMC_RSP_BUSY (1 << 3) /* card may send busy */
+#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
+#define MMC_CMD_MASK (3 << 5) /* command type */
+#define MMC_CMD_AC (0 << 5)
+#define MMC_CMD_ADTC (1 << 5)
+#define MMC_CMD_BC (2 << 5)
+#define MMC_CMD_BCR (3 << 5)

/*
* These are the response types, and correspond to valid bit
* patterns of the above flags. One additional valid pattern
* is all zeros, which means we don't expect a response.
*/
-#define MMC_RSP_R1 (MMC_RSP_SHORT|MMC_RSP_CRC|MMC_RSP_OPCODE)
-#define MMC_RSP_R1B (MMC_RSP_SHORT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
-#define MMC_RSP_R2 (MMC_RSP_LONG|MMC_RSP_CRC)
-#define MMC_RSP_R3 (MMC_RSP_SHORT)
-#define MMC_RSP_R6 (MMC_RSP_SHORT|MMC_RSP_CRC)
+#define MMC_RSP_NONE (0)
+#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+#define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
+#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
+#define MMC_RSP_R3 (MMC_RSP_PRESENT)
+#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC)
+
+#define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
+
+/*
+ * These are the command types.
+ */
+#define mmc_cmd_type(cmd) ((cmd)->flags & MMC_CMD_TYPE)

unsigned int retries; /* max number of retries */
unsigned int error; /* command error */

--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-02-02 11:43    [W:0.121 / U:6.436 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site