Messages in this thread | | | Date | Mon, 13 Feb 2006 20:18:47 -0500 (EST) | From | Justin Piszcz <> | Subject | Re: Is my SATA/400GB drive dying? |
| |
I spoke too fast.
Still get the errors:
[ 2311.980127] ata3: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00 [ 2311.980134] ata3: status=0x51 { DriveReady SeekComplete Error } [ 2311.980138] ata3: error=0x04 { DriveStatusError }
But the drive speed is back to normal!
# hdparm -t /dev/sdc
/dev/sdc: Timing buffered disk reads: 154 MB in 3.01 seconds = 51.12 MB/sec #
On Mon, 13 Feb 2006, Justin Piszcz wrote:
> The problem was I had too many SATA devices in my system, I removed two > drives and a Promise SATA/150 and then everything went back to normal, no > more errors and back to 50MB/s+. > > > On Mon, 13 Feb 2006, Justin Piszcz wrote: > >> I turned off smartd and when I cat /dev/zero > /mnt/disk/file, I get the >> following errors: >> >> [37978.030178] ata6: no sense translation for status: 0x51 >> [37978.030185] ata6: translated ATA stat/err 0x51/00 to SCSI SK/ASC/ASCQ >> 0x3/11/04 >> [37978.030188] ata6: status=0x51 { DriveReady SeekComplete Error } >> >> > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |