lkml.org 
[lkml]   [2006]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.19 does not boot, while 2.6.19-rc4 does
On Sat, 9 Dec 2006 16:28:59 +0100 Norbert Preining wrote:

> Hi all!
>
> [Please Cc]
>
> I copied my old config-2.6.19-rc4 to a clean linux-2.6.19 tree, called
> make oldconfig; make, installed the kernel and modules, but the kernel
> cannot find the root file system.
>
> I diffed the two config files and the only not-comment diff is:
> -# CONFIG_SYSCTL_SYSCALL is not set
> +CONFIG_SYSCTL_SYSCALL=y
> (how did this happen?)

The default changed from n to y.

> a part of the dmesg is included here (from -rc4):
>
> libata version 2.00 loaded.
> ata_piix 0000:00:1f.2: version 2.00ac6
> ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
> ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
> ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15
> scsi0 : ata_piix
> PM: Adding info for No Bus:host0
> ata1.00: ATA-7, max UDMA/133, 195371568 sectors: LBA48 NCQ (depth 0/32)
> ata1.00: ata1: dev 0 multi count 16
> ata1.00: configured for UDMA/133
> scsi1 : ata_piix

That didn't help (me).

> Hardware: Acer TravelMate 3012
>
>
> Any suggestions what to do next?

Test 2.6.19-rc5, 2.6.19-rc6, and then use git snapshots or
git bisect to focus in on the breakage.

And post more complete boot logs.

---
~Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-12-09 19:43    [W:0.037 / U:2.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site