lkml.org 
[lkml]   [2006]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectsuspend to disk (was Re: ReiserFS corruption with 2.6.19 (Was 2.6.19 is not stable with SATA and should not be used by any meansis not stable with SATA and should not be used by any means))
Hi!

> >Stop spreading fud. Take powersave + suspend from
> >suse10.2, and see
> >if you can break it.
> >
> >sata_nv seems to have problem, that's it. and it
> >triggered problem in
> >reiserfs. Use ext3 if you care about your data, and yes
> >your drivers
> >need to support suspend/resume.

> >
> My Compaq laptop, a Presario 2200, has video lockups
> using suspend to disk and a dead system everytime I use
> it. I don't

Try with vga=1 (no framebuffer) and minimum number of modules.

> think its fud. I also conceed its not Linux's fault most
> of the time. These vendors put Windows specific hardware

suspend to ram is usually video bios problem; suspend to disk tends to
be linux problem.
Pavel

--
Thanks for all the (sleeping) penguins.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-12-23 10:41    [W:0.096 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site