lkml.org 
[lkml]   [2006]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] Various typo fixes.

Correct mis-spellings of "algorithm", "appear", "consistent" and
(shame, shame) "kernel".

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>

---

Documentation/video4linux/bttv/Insmod-options | 2 +-
arch/m32r/lib/usercopy.c | 4 ++--
arch/m68knommu/platform/5307/timers.c | 2 +-
drivers/infiniband/hw/ipath/ipath_iba6110.c | 2 +-
drivers/infiniband/hw/ipath/ipath_iba6120.c | 2 +-
drivers/isdn/i4l/isdn_ppp.c | 2 +-
drivers/net/e1000/e1000_hw.h | 2 +-
drivers/net/wireless/wavelan_cs.c | 8 ++++----
drivers/sbus/char/vfc_i2c.c | 2 +-
include/linux/seqlock.h | 2 +-
lib/textsearch.c | 2 +-
net/ipv4/tcp_cong.c | 2 +-
12 files changed, 16 insertions(+), 16 deletions(-)


diff --git a/Documentation/video4linux/bttv/Insmod-options b/Documentation/video4linux/bttv/Insmod-options
index bb7c2ca..5ef7578 100644
--- a/Documentation/video4linux/bttv/Insmod-options
+++ b/Documentation/video4linux/bttv/Insmod-options
@@ -57,7 +57,7 @@ bttv.o
i2c_udelay= Allow reduce I2C speed. Default is 5 usecs
(meaning 66,67 Kbps). The default is the
maximum supported speed by kernel bitbang
- algoritm. You may use lower numbers, if I2C
+ algorithm. You may use lower numbers, if I2C
messages are lost (16 is known to work on
all supported cards).

diff --git a/arch/m32r/lib/usercopy.c b/arch/m32r/lib/usercopy.c
index 896cef1..82abd15 100644
--- a/arch/m32r/lib/usercopy.c
+++ b/arch/m32r/lib/usercopy.c
@@ -293,7 +293,7 @@ long strnlen_user(const char __user *s, long n)
: "0" (n), "1" (s), "r" (n & 3), "r" (mask), "r"(0x01010101)
: "r0", "r1", "cbit");

- /* NOTE: strnlen_user() algorism:
+ /* NOTE: strnlen_user() algorithm:
* {
* char *p;
* for (p = s; n-- && *p != '\0'; ++p)
@@ -369,7 +369,7 @@ long strnlen_user(const char __user *s, long n)
: "0" (n), "1" (s), "r" (n & 3), "r" (mask), "r"(0x01010101)
: "r0", "r1", "r2", "r3", "cbit");

- /* NOTE: strnlen_user() algorism:
+ /* NOTE: strnlen_user() algorithm:
* {
* char *p;
* for (p = s; n-- && *p != '\0'; ++p)
diff --git a/arch/m68knommu/platform/5307/timers.c b/arch/m68knommu/platform/5307/timers.c
index e5668af..b2d8e61 100644
--- a/arch/m68knommu/platform/5307/timers.c
+++ b/arch/m68knommu/platform/5307/timers.c
@@ -104,7 +104,7 @@ unsigned long coldfire_timer_offset(void)

/*
* Choose a reasonably fast profile timer. Make it an odd value to
- * try and get good coverage of kernal operations.
+ * try and get good coverage of kernel operations.
*/
#define PROFILEHZ 1013

diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c
index 7468477..9934825 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6110.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -1534,7 +1534,7 @@ static int ipath_ht_early_init(struct ipath_devdata *dd)
* @kbase: ipath_base_info pointer
*
* We set the PCIE flag because the lower bandwidth on PCIe vs
- * HyperTransport can affect some user packet algorithims.
+ * HyperTransport can affect some user packet algorithms.
*/
static int ipath_ht_get_base_info(struct ipath_portdata *pd, void *kbase)
{
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index ae8bf99..05918e1 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -1293,7 +1293,7 @@ int __attribute__((weak)) ipath_unordered_wc(void)
* @kbase: ipath_base_info pointer
*
* We set the PCIE flag because the lower bandwidth on PCIe vs
- * HyperTransport can affect some user packet algorithims.
+ * HyperTransport can affect some user packet algorithms.
*/
static int ipath_pe_get_base_info(struct ipath_portdata *pd, void *kbase)
{
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index 1726131..87115b8 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -1680,7 +1680,7 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp,
* - we hit a gap in the sequence, so no reassembly/processing is
* possible ('start' would be set to NULL)
*
- * algorightm for this code is derived from code in the book
+ * algorithm for this code is derived from code in the book
* 'PPP Design And Debugging' by James Carlson (Addison-Wesley)
*/
while (start != NULL || newfrag != NULL) {
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 3321fb1..7f5c90f 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -3247,7 +3247,7 @@ struct e1000_host_command_info {
#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */
#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */
#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
-#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorthm is completed */
+#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */
#define IFE_PMC_MDIX_MODE_SHIFT 6
#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */

diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 5eb8163..b042397 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -1168,7 +1168,7 @@ wv_mmc_show(struct net_device * dev)
m.mmr_unused0[6],
m.mmr_unused0[7]);
#endif /* DEBUG_SHOW_UNUSED */
- printk(KERN_DEBUG "Encryption algorythm: %02X - Status: %02X\n",
+ printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n",
m.mmr_des_avail, m.mmr_des_status);
#ifdef DEBUG_SHOW_UNUSED
printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n",
@@ -3590,9 +3590,9 @@ wv_82593_config(struct net_device * dev)
cfblk.acloc = TRUE; /* Disable source addr insertion by i82593 */
cfblk.preamb_len = 0; /* 2 bytes preamble (SFD) */
cfblk.loopback = FALSE;
- cfblk.lin_prio = 0; /* conform to 802.3 backoff algoritm */
- cfblk.exp_prio = 5; /* conform to 802.3 backoff algoritm */
- cfblk.bof_met = 1; /* conform to 802.3 backoff algoritm */
+ cfblk.lin_prio = 0; /* conform to 802.3 backoff algorithm */
+ cfblk.exp_prio = 5; /* conform to 802.3 backoff algorithm */
+ cfblk.bof_met = 1; /* conform to 802.3 backoff algorithm */
cfblk.ifrm_spc = 0x20 >> 4; /* 32 bit times interframe spacing */
cfblk.slottim_low = 0x20 >> 5; /* 32 bit times slot time */
cfblk.slottim_hi = 0x0;
diff --git a/drivers/sbus/char/vfc_i2c.c b/drivers/sbus/char/vfc_i2c.c
index ceec306..9efed77 100644
--- a/drivers/sbus/char/vfc_i2c.c
+++ b/drivers/sbus/char/vfc_i2c.c
@@ -14,7 +14,7 @@
/* NOTE: It seems to me that the documentation regarding the
pcd8584t/pcf8584 does not show the correct way to address the i2c bus.
Based on the information on the I2C bus itself and the remainder of
-the Phillips docs the following algorithims apper to be correct. I am
+the Phillips docs the following algorithms appear to be correct. I am
fairly certain that the flowcharts in the phillips docs are wrong. */


diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
index 6b0648c..52c9eb9 100644
--- a/include/linux/seqlock.h
+++ b/include/linux/seqlock.h
@@ -2,7 +2,7 @@
#define __LINUX_SEQLOCK_H
/*
* Reader/writer consistent mechanism without starving writers. This type of
- * lock for data where the reader wants a consitent set of information
+ * lock for data where the reader wants a consistent set of information
* and is willing to retry if the information changes. Readers never
* block but they may have to retry if a writer is in
* progress. Writers do not wait for readers.
diff --git a/lib/textsearch.c b/lib/textsearch.c
index 98bcadc..0dd98eb 100644
--- a/lib/textsearch.c
+++ b/lib/textsearch.c
@@ -40,7 +40,7 @@
* configuration according to the specified parameters.
* (3) User starts the search(es) by calling _find() or _next() to
* fetch subsequent occurrences. A state variable is provided
- * to the algorihtm to store persistent variables.
+ * to the algorithm to store persistent variables.
* (4) Core eventually resets the search offset and forwards the find()
* request to the algorithm.
* (5) Algorithm calls get_next_block() provided by the user continously
diff --git a/net/ipv4/tcp_cong.c b/net/ipv4/tcp_cong.c
index 5ca7723..7c1a87d 100644
--- a/net/ipv4/tcp_cong.c
+++ b/net/ipv4/tcp_cong.c
@@ -29,7 +29,7 @@ static struct tcp_congestion_ops *tcp_ca_find(const char *name)
}

/*
- * Attach new congestion control algorthim to the list
+ * Attach new congestion control algorithm to the list
* of available options.
*/
int tcp_register_congestion_control(struct tcp_congestion_ops *ca)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2006-12-14 14:27    [W:0.031 / U:31.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site