lkml.org 
[lkml]   [2006]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    Subject[-mm patch 3/4] AVR32: Move spi device definitions into main board setup file
    There's no point in having a separate file just to set up the board-
    specific data for spi. By moving it into the rest of the board-
    specific setup code, we can also make sure that the data is
    registered before we register the spi master controller.

    This patch also records the GPIO pin to use as chip select in the
    controller_data member of the spi_board_info data for each device.

    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
    ---
    arch/avr32/boards/atstk1000/Makefile | 2 +-
    arch/avr32/boards/atstk1000/atstk1002.c | 15 +++++++++++++++
    arch/avr32/boards/atstk1000/spi.c | 27 ---------------------------
    3 files changed, 16 insertions(+), 28 deletions(-)

    Index: linux-2.6.19-rc4-mm2/arch/avr32/boards/atstk1000/Makefile
    ===================================================================
    --- linux-2.6.19-rc4-mm2.orig/arch/avr32/boards/atstk1000/Makefile 2006-11-07 11:29:15.000000000 +0100
    +++ linux-2.6.19-rc4-mm2/arch/avr32/boards/atstk1000/Makefile 2006-11-07 11:31:00.000000000 +0100
    @@ -1,2 +1,2 @@
    -obj-y += setup.o spi.o flash.o
    +obj-y += setup.o flash.o
    obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
    Index: linux-2.6.19-rc4-mm2/arch/avr32/boards/atstk1000/atstk1002.c
    ===================================================================
    --- linux-2.6.19-rc4-mm2.orig/arch/avr32/boards/atstk1000/atstk1002.c 2006-11-07 11:29:15.000000000 +0100
    +++ linux-2.6.19-rc4-mm2/arch/avr32/boards/atstk1000/atstk1002.c 2006-11-07 11:33:09.000000000 +0100
    @@ -7,11 +7,24 @@
    * it under the terms of the GNU General Public License version 2 as
    * published by the Free Software Foundation.
    */
    +#include <linux/device.h>
    #include <linux/init.h>
    +#include <linux/spi/spi.h>

    +#include <asm/arch/at32ap7000.h>
    #include <asm/arch/board.h>
    #include <asm/arch/init.h>

    +static struct spi_board_info spi_board_info[] __initdata = {
    + {
    + .modalias = "ltv350qv",
    + .controller_data = (void *)GPIO_PIN_PA4,
    + .max_speed_hz = 16000000,
    + .bus_num = 0,
    + .chip_select = 1,
    + },
    +};
    +
    struct eth_platform_data __initdata eth0_data = {
    .valid = 1,
    .mii_phy_addr = 0x10,
    @@ -39,6 +52,8 @@ static int __init atstk1002_init(void)
    at32_add_device_usart(2);

    at32_add_device_eth(0, &eth0_data);
    +
    + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
    at32_add_device_spi(0);
    at32_add_device_lcdc(0, &atstk1000_fb0_data);

    Index: linux-2.6.19-rc4-mm2/arch/avr32/boards/atstk1000/spi.c
    ===================================================================
    --- linux-2.6.19-rc4-mm2.orig/arch/avr32/boards/atstk1000/spi.c 2006-11-07 11:29:15.000000000 +0100
    +++ /dev/null 1970-01-01 00:00:00.000000000 +0000
    @@ -1,27 +0,0 @@
    -/*
    - * ATSTK1000 SPI devices
    - *
    - * Copyright (C) 2005 Atmel Norway
    - *
    - * This program is free software; you can redistribute it and/or modify
    - * it under the terms of the GNU General Public License version 2 as
    - * published by the Free Software Foundation.
    - */
    -#include <linux/device.h>
    -#include <linux/spi/spi.h>
    -
    -static struct spi_board_info spi_board_info[] __initdata = {
    - {
    - .modalias = "ltv350qv",
    - .max_speed_hz = 16000000,
    - .bus_num = 0,
    - .chip_select = 1,
    - },
    -};
    -
    -static int board_init_spi(void)
    -{
    - spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
    - return 0;
    -}
    -arch_initcall(board_init_spi);
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/
    \
     
     \ /
      Last update: 2006-11-07 12:45    [W:4.046 / U:0.032 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site