[lkml]   [2006]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] ide_scsi: allow it to be used for non CD only
On 11/29/06, Alan <> wrote:
> On Wed, 29 Nov 2006 23:05:56 +0100
> "Bartlomiej Zolnierkiewicz" <> wrote:
> > Hi,
> >
> > Nowadays, you can dynamically change driver bound to a device using
> > sysfs and it works just fine for IDE, ie:
> This isn't the point of this change. The point is to do this at discovery
> time. If you do it later then many horrible things happen as the device

then "hdc=ide-cdrom" at a boot time should keep ide-scsi from
binding to hdc for all cases (builtin/modular ide-cd/ide-scsi)

> names and renames itself while udev goes boom.

Uh? I hope that udev people are informed
about these horrible things...

/dev/hdc stays there all the time
/dev/sr? addition/removal should be handled
by udev otherwise it looks like a udev bug

> Its a small clean patch and it'll solve the problem nicely until
> drivers/ide dies.

No strong feelings here about the patch. It is indeed a clean hack. ;)
I just wanted to point out that there are already more flexible ways
to achieve the same thing.

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2006-11-29 23:49    [W:0.026 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site