lkml.org 
[lkml]   [2006]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Problem booting linux 2.6.19-rc5, 2.6.19-rc5-git6, 2.6.19-rc5-mm2 with md raid 1 over lvm root
Tejun Heo wrote:
> Nicolas Mailhot wrote:
>> The failing kernels (I tried -rc5, -rc5-git6, -rc5-mm2 only print :
>>
>> %<----
>> device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
>> dm-devel@redhat.com
>> md: Autodetecting RAID arrays.
>> md: autorun ...
>> md: ... autorun DONE.
>> %<-----
>>
>> (I didn't bother copying the rest of the failing kernel dmesg, as sata
>> initialisation fills the first half of the screen, then dm is
>> initialised,
>> then you only get the logical consequences of failing to detect the /
>> volume. The sata part seems fine – it prints the name of the hard drives
>> we want to use)
>>
>> I'm attaching the dmesg for the working distro kernel (yes I know not
>> 100%
>> distro kernel, but very close to one), distro config , and the config I
>> used in my test. If anyone could help me to figure what's wrong I'd be
>> grateful.
>
> Say 'y' not 'm' to SCSI disk support.
>
That will probably work, but just building a new initrd is probably a
lot easier. Although I thought the SCSI modules were included if built
and installed if present.

--
bill davidsen <davidsen@tmr.com>
CTO TMR Associates, Inc
Doing interesting things with small computers since 1979


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-11-20 20:39    [W:0.035 / U:7.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site