lkml.org 
[lkml]   [2006]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 21/22] cell: add routines for managing PMU interrupts
From: Kevin Corry <kevcorry@us.ibm.com>

The following routines are added to arch/powerpc/platforms/cell/pmu.c:
cbe_clear_pm_interrupts()
cbe_enable_pm_interrupts()
cbe_disable_pm_interrupts()
cbe_query_pm_interrupts()
cbe_pm_irq()
cbe_init_pm_irq()

This also adds a routine in arch/powerpc/platforms/cell/interrupt.c and
some macros in cbe_regs.h to manipulate the IIC_IR register:
iic_set_interrupt_routing()

Signed-off-by: Kevin Corry <kevcorry@us.ibm.com>
Signed-off-by: Carl Love <carll@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Index: linux-2.6/arch/powerpc/platforms/cell/pmu.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/cell/pmu.c
+++ linux-2.6/arch/powerpc/platforms/cell/pmu.c
@@ -22,9 +22,11 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

+#include <linux/interrupt.h>
#include <linux/types.h>
#include <asm/io.h>
#include <asm/machdep.h>
+#include <asm/pmc.h>
#include <asm/reg.h>
#include <asm/spu.h>

@@ -338,3 +340,71 @@ void cbe_read_trace_buffer(u32 cpu, u64
}
EXPORT_SYMBOL_GPL(cbe_read_trace_buffer);

+/*
+ * Enabling/disabling interrupts for the entire performance monitoring unit.
+ */
+
+u32 cbe_query_pm_interrupts(u32 cpu)
+{
+ return cbe_read_pm(cpu, pm_status);
+}
+EXPORT_SYMBOL_GPL(cbe_query_pm_interrupts);
+
+u32 cbe_clear_pm_interrupts(u32 cpu)
+{
+ /* Reading pm_status clears the interrupt bits. */
+ return cbe_query_pm_interrupts(cpu);
+}
+EXPORT_SYMBOL_GPL(cbe_clear_pm_interrupts);
+
+void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask)
+{
+ /* Set which node and thread will handle the next interrupt. */
+ iic_set_interrupt_routing(cpu, thread, 0);
+
+ /* Enable the interrupt bits in the pm_status register. */
+ if (mask)
+ cbe_write_pm(cpu, pm_status, mask);
+}
+EXPORT_SYMBOL_GPL(cbe_enable_pm_interrupts);
+
+void cbe_disable_pm_interrupts(u32 cpu)
+{
+ cbe_clear_pm_interrupts(cpu);
+ cbe_write_pm(cpu, pm_status, 0);
+}
+EXPORT_SYMBOL_GPL(cbe_disable_pm_interrupts);
+
+static irqreturn_t cbe_pm_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ perf_irq(regs);
+ return IRQ_HANDLED;
+}
+
+int __init cbe_init_pm_irq(void)
+{
+ unsigned int irq;
+ int rc, node;
+
+ for_each_node(node) {
+ irq = irq_create_mapping(NULL, IIC_IRQ_IOEX_PMI |
+ (node << IIC_IRQ_NODE_SHIFT));
+ if (irq == NO_IRQ) {
+ printk("ERROR: Unable to allocate irq for node %d\n",
+ node);
+ return -EINVAL;
+ }
+
+ rc = request_irq(irq, cbe_pm_irq,
+ IRQF_DISABLED, "cbe-pmu-0", NULL);
+ if (rc) {
+ printk("ERROR: Request for irq on node %d failed\n",
+ node);
+ return rc;
+ }
+ }
+
+ return 0;
+}
+arch_initcall(cbe_init_pm_irq);
+
Index: linux-2.6/arch/powerpc/platforms/cell/interrupt.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/cell/interrupt.c
+++ linux-2.6/arch/powerpc/platforms/cell/interrupt.c
@@ -396,3 +396,19 @@ void __init iic_init_IRQ(void)
/* Enable on current CPU */
iic_setup_cpu();
}
+
+void iic_set_interrupt_routing(int cpu, int thread, int priority)
+{
+ struct cbe_iic_regs __iomem *iic_regs = cbe_get_cpu_iic_regs(cpu);
+ u64 iic_ir = 0;
+ int node = cpu >> 1;
+
+ /* Set which node and thread will handle the next interrupt */
+ iic_ir |= CBE_IIC_IR_PRIO(priority) |
+ CBE_IIC_IR_DEST_NODE(node);
+ if (thread == 0)
+ iic_ir |= CBE_IIC_IR_DEST_UNIT(CBE_IIC_IR_PT_0);
+ else
+ iic_ir |= CBE_IIC_IR_DEST_UNIT(CBE_IIC_IR_PT_1);
+ out_be64(&iic_regs->iic_ir, iic_ir);
+}
Index: linux-2.6/arch/powerpc/platforms/cell/interrupt.h
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/cell/interrupt.h
+++ linux-2.6/arch/powerpc/platforms/cell/interrupt.h
@@ -83,5 +83,7 @@ extern u8 iic_get_target_id(int cpu);

extern void spider_init_IRQ(void);

+extern void iic_set_interrupt_routing(int cpu, int thread, int priority);
+
#endif
#endif /* ASM_CELL_PIC_H */
Index: linux-2.6/include/asm-powerpc/cell-pmu.h
===================================================================
--- linux-2.6.orig/include/asm-powerpc/cell-pmu.h
+++ linux-2.6/include/asm-powerpc/cell-pmu.h
@@ -87,4 +87,9 @@ extern void cbe_disable_pm(u32 cpu);

extern void cbe_read_trace_buffer(u32 cpu, u64 *buf);

+extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask);
+extern void cbe_disable_pm_interrupts(u32 cpu);
+extern u32 cbe_query_pm_interrupts(u32 cpu);
+extern u32 cbe_clear_pm_interrupts(u32 cpu);
+
#endif /* __ASM_CELL_PMU_H__ */
Index: linux-2.6/arch/powerpc/platforms/cell/cbe_regs.h
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/cell/cbe_regs.h
+++ linux-2.6/arch/powerpc/platforms/cell/cbe_regs.h
@@ -185,6 +185,14 @@ struct cbe_iic_regs {
struct cbe_iic_thread_regs thread[2]; /* 0x0400 */

u64 iic_ir; /* 0x0440 */
+#define CBE_IIC_IR_PRIO(x) (((x) & 0xf) << 12)
+#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4)
+#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf)
+#define CBE_IIC_IR_IOC_0 0x0
+#define CBE_IIC_IR_IOC_1S 0xb
+#define CBE_IIC_IR_PT_0 0xe
+#define CBE_IIC_IR_PT_1 0xf
+
u64 iic_is; /* 0x0448 */
#define CBE_IIC_IS_PMI 0x2

--

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-11-20 19:29    [W:0.154 / U:1.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site