lkml.org 
[lkml]   [2006]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: 2.6.19-rc5-mm1 : probe of 0000:00:1f.2 failed with error -16
Date
Alle 16:20, lunedì 13 novembre 2006, Remi ha scritto:
> Selon Fabio Coatti <cova@ferrara.linux.it>:
> > > ata_piix: probe of 0000:00:1f.2 failed with error -16
> > > Kernel panic - not syncing: Attempted to kill init!
> > >
> > > I disabled most options in my .config file just keeping ata_piix
> > > enabled. 2.6.19-rc5 still boots fine but 2.6.19-rc-mm1 gives the same
> > > previous message.
> >
> > It seems exactly the same problem that is hitting me:
> >
> > http://lkml.org/lkml/2006/11/13/37
> >
> > If some patch comes out, I'll be willing to try it asap ;)
>
> You are getting the same message
>
> ata_piix 0000:00:1f.2: MAP [ P0 P1 IDE IDE ]
> ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17
> PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:1f.2
> ata_piix: probe of 0000:00:1f.2 failed with error -16
>
> But, your drives are driven by the sata_sil driver, which seems to be ok.
> See your partition tables displayed below.

Not exactly: my fault to not including previous mails, but basically I've two
different devices: one driven by sata_sil, the other by piix.
cfr: http://lkml.org/lkml/2006/11/12/20
In this dmesg, the kernel finds only the second device, and assigns the
name "sda"; of course the right drive (the real "sda" on my system) is not
detected so the kernel is searching the "/" filesystem where it cannot be
found.

here the relevant part of lspci output:

00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev
02) (prog-if 8a [Master SecP PriP])
Subsystem: ABIT Computer Corp. Unknown device 1014
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at f000 [size=16]


03:03.0 RAID bus controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid]
Serial ATA Controller (rev 02)
Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
I/O ports at 8000 [size=8]
I/O ports at 8400 [size=4]
I/O ports at 8800 [size=8]
I/O ports at 8c00 [size=4]
I/O ports at 9000 [size=16]
Memory at fb005000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 50000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2




--
Fabio "Cova" Coatti http://members.ferrara.linux.it/cova
Ferrara Linux Users Group http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-11-13 16:57    [W:2.325 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site