lkml.org 
[lkml]   [2006]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subject2.6.19-rc4-mm1: noidlehz problems
    Hi!

    First, it would be nice if we had someone listed as a maintainer of
    noidlehz stuff...

    Then... I'm getting strange messages from noidlehz each time I
    unplug/replug AC power (perhaps due to interrupt latency?).

    Disabling NO_HZ and high resolution timers due to timer broadcasting
    (C3 stops local apic)
    Adding 987988k swap on /dev/sda1. Priority:-1 extents:1
    across:987988k
    Disabling NO_HZ and high resolution timers due to timer broadcasting
    (C3 stops local apic)
    EXT2-fs warning (device sda2): ext2_fill_super: mounting ext3
    filesystem as ext2
    pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr.
    pcmcia: This interface will soon be removed from the kernel; please
    expect breakage unless you upgrade to new tools.
    pcmcia: see
    http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for
    details.
    cs: IO port probe 0x310-0x380: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    Disabling NO_HZ and high resolution timers due to timer broadcasting
    (C3 stops local apic)
    Disabling NO_HZ and high resolution timers due to timer broadcasting
    (C3 stops local apic)
    e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
    e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
    coda_read_super: Bad mount data
    coda_read_super: device index: 0
    coda_read_super: rootfid is (01234567.ffffffff.080519b0.00000000)
    coda_upcall: Venus dead on (op,un) (7.2) flags 10
    Failure of coda_cnode_make for root: error -19
    acpiphp_glue: cannot get bridge info
    Disabling NO_HZ and high resolution timers due to timer broadcasting
    (C3 stops local apic)
    Disabling NO_HZ and high resolution timers due to timer broadcasting
    (C3 stops local apic)
    Disabling NO_HZ and high resolution timers due to timer broadcasting
    (C3 stops local apic)
    Disabling NO_HZ and high resolution timers due to timer broadcasting
    (C3 stops local apic)

    ...I'd expect one such message, not many of them. Something seems
    seriously wrong there...

    Plus, suspend to RAM and disk is broken in -rc4-mm1. Suspend to RAM
    dies with screaming speaker, suspend to disk returns but machine is
    mostly toast (and screaming, looks like timer problem, beeps never
    end). I'll disable NO_HZ and try again.

    Pavel
    --
    (english) http://www.livejournal.com/~pavelmachek
    (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2006-11-01 13:27    [W:0.021 / U:152.332 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site