Messages in this thread | | | From | Bernhard Rosenkraenzer <> | Subject | 2.6.19-rc2-mm2: D-Link DUB-E100 Rev. B broken | Date | Mon, 23 Oct 2006 20:41:48 +0200 |
| |
Hi, D-Link DUB-E100 Rev. B USB Ethernet adapters have worked ok in some recent kernels - in rc2-mm2, they're broken again; they're detected correctly and the asix module is autoloaded, but after "ifconfig eth0 192.168.0.15 netmask 255.255.255.0", the box becomes unresponsive and keeps repeating
eth0: Failed to enable software MII access eth0: Failed to enable hardware MII access eth0: Failed to enable software MII access eth0: Failed to enable hardware MII access eth0: Failed to enable software MII access eth0: Failed to enable hardware MII access eth0: Failed to enable software MII access eth0: Failed to enable hardware MII access eth0: Failed to enable software MII access eth0: Failed to enable hardware MII access eth0: Failed to write Medium Mode to 0x0334: ffffff92
This loops infinitely.
Last known working is 2.6.17 with a patch to bring the asix driver up to the 14-Jun-2006 revision, first known broken is 2.6.19-rc1-mm1. (I'll try to figure out what exact change broke it, but this will take forever on this hw). - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |