lkml.org 
[lkml]   [2006]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/5] Char: sx, convert to pci probing
Rolf Eike Beer wrote:
> Jiri Slaby wrote:
>> sx, convert to pci probing
>>
>> convert old pci code to pci probing.
>>
>> Cc: <R.E.Wolff@BitWizard.nl>
>> Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
>>
>> ---
>> commit 56b6b52313a48cbda4c84bd35252337063269d88
>> tree 1f32778374ad0eb5d2671cc94674753d1198dbff
>> parent d8e4a1a052b460b07936030bc99d8d9fe2b4bbf9
>> author Jiri Slaby <jirislaby@gmail.com> Sun, 22 Oct 2006 01:51:54 +0200
>> committer Jiri Slaby <jirislaby@gmail.com> Sun, 22 Oct 2006 01:51:54 +0200
>>
>> drivers/char/sx.c | 183
>> ++++++++++++++++++++++++++++++----------------------- 1 files changed, 105
>> insertions(+), 78 deletions(-)
>>
>> diff --git a/drivers/char/sx.c b/drivers/char/sx.c
>> index cf08be7..9b800bd 100644
>> --- a/drivers/char/sx.c
>> +++ b/drivers/char/sx.c
>> @@ -246,14 +246,6 @@ #ifndef PCI_DEVICE_ID_SPECIALIX_SX_XIO_I
>> #define PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 0x2000
>> #endif
>>
>> -#ifdef CONFIG_PCI
>> -static struct pci_device_id sx_pci_tbl[] = {
>> - { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8,
>> PCI_ANY_ID, PCI_ANY_ID }, - { 0 }
>> -};
>> -MODULE_DEVICE_TABLE(pci, sx_pci_tbl);
>> -#endif /* CONFIG_PCI */
>> -
>> /* Configurable options:
>> (Don't be too sure that it'll work if you toggle them) */
>>
>> @@ -2373,7 +2365,6 @@ static void __exit sx_release_drivers(vo
>> func_exit();
>> }
>>
>> -#ifdef CONFIG_PCI
>> /********************************************************
>> * Setting bit 17 in the CNTRL register of the PLX 9050 *
>> * chip forces a retry on writes while a read is pending.*
>> @@ -2404,22 +2395,112 @@ #define CNTRL_REG_GOODVALUE 0x182600
>> }
>> iounmap(rebase);
>> }
>> -#endif
>>
>> +static int __devinit sx_pci_probe(struct pci_dev *pdev,
>> + const struct pci_device_id *ent)
>> +{
>> + struct sx_board *board;
>> + unsigned int i;
>> + int retval = -EIO;
>> +
>> + for (i = 0; i < SX_NBOARDS; i++)
>> + if (!(boards[i].flags & SX_BOARD_PRESENT))
>> + break;
>> +
>> + if (i == SX_NBOARDS)
>> + goto err;
>> +
>> + retval = pci_enable_device(pdev);
>> + if (retval)
>> + goto err;
>> +
>> + board = &boards[i];
>
> I'm rather sure you need some type of locking here.

Yes, correct, it's gonna to be done.

>> +
>> + board->flags &= ~SX_BOARD_TYPE;
>> + board->flags |= (pdev->subsystem_vendor == 0x200) ? SX_PCI_BOARD :
>> + SX_CFPCI_BOARD;
>> +
>> + /* CF boards use base address 3.... */
>> + if (IS_CF_BOARD (board))
>> + board->hw_base = pci_resource_start(pdev, 3);
>> + else
>> + board->hw_base = pci_resource_start(pdev, 2);
>> + board->base2 =
>> + board->base = ioremap(board->hw_base, WINDOW_LEN (board));
>> + if (!board->base) {
>> + dev_err(&pdev->dev, "ioremap failed\n");
>> + goto err;
>> + }
>
> pci_iomap() or something?

I agree, not in this patch.

>> +
>> + /* Most of the stuff on the CF board is offset by 0x18000 .... */
>> + if (IS_CF_BOARD (board))
>> + board->base += 0x18000;
>> +
>> + board->irq = pdev->irq;
>
> Is this extra copy of the IRQ number needed?
>
>
>> @@ -2585,6 +2611,7 @@ static void __exit sx_exit (void)
>> struct sx_board *board;
>>
>> func_enter();
>> + pci_unregister_driver(&sx_pcidriver);
>> for (i = 0; i < SX_NBOARDS; i++) {
>> board = &boards[i];
>> if (board->flags & SX_BOARD_INITIALIZED) {
>
> Locking?

There are many more places, that needs to be locked due to these flags. I will
post them, this is only part I of changes. (If somebody objects to something it
will brake everything on the top of that patch. That's the reason, why I post in
batches.)

thanks,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-10-23 12:57    [W:0.038 / U:1.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site