lkml.org 
[lkml]   [2006]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    SubjectRe: [patch 00/21] high resolution timers / dynamic ticks - V2
    From
    Date
    (Sorry for the size of the note, there's some 50K of logs attached)

    On Mon, 02 Oct 2006 15:43:02 +0200, Thomas Gleixner said:
    > Can you please send me the bootlog and further dmesg output (especially
    > when related to timers / cpufreq).

    I booted the box to single-user both times, and then started cpuspeed.
    I then did a cat of /proc/interrupts, /proc/uptime, and a date command,
    waited 60 seconds according to my watch, and repeated. I then dumped
    the dmesg. The -dyntick kernel moved 'uptime' almost exactly 45 seconds
    (almost certainly a by-product of running at 1.2Ghz rather than 1.6Ghz).
    Does the dyntick code make any unwritten assumptions about a jiffie or
    bogomips remaining constant?

    Attached - config diff, date and /proc dumps from both -mm2 and -mm2-dyntick,
    and the dmesg's from both boots.

    Yell if you have any other questions/suggestions/etc..

    > > I'm also seeing gkrellm reporting about 25% CPU use when "near-idle" (X is up
    > > but not much is going on) when that's usually down around 5-6%. I need to
    > > collect some oprofile numbers and investigate that as well.
    >
    > I look into the accounting fixups again.
    I still need to get oprofile runs of this and see what's going on.
    --- linux-2.6.18-mm2/.config 2006-10-02 10:11:34.000000000 -0400
    +++ linux-2.6.18-mm2-hrt-dyntick5/.config 2006-10-02 02:19:09.000000000 -0400
    @@ -1,10 +1,11 @@
    #
    # Automatically generated make config: don't edit
    -# Linux kernel version: 2.6.18-mm2
    -# Mon Oct 2 10:11:34 2006
    +# Linux kernel version: 2.6.18-mm2-hrt-dyntick5
    +# Mon Oct 2 02:19:09 2006
    #
    CONFIG_X86_32=y
    CONFIG_GENERIC_TIME=y
    +CONFIG_GENERIC_CLOCKEVENTS=y
    CONFIG_LOCKDEP_SUPPORT=y
    CONFIG_STACKTRACE_SUPPORT=y
    CONFIG_SEMAPHORE_SLEEPERS=y
    @@ -103,6 +104,9 @@
    #
    # Processor type and features
    #
    +CONFIG_HIGH_RES_TIMERS=y
    +CONFIG_HIGH_RES_RESOLUTION=1000
    +CONFIG_NO_HZ=y
    # CONFIG_SMP is not set
    CONFIG_X86_PC=y
    # CONFIG_X86_ELAN is not set
    @@ -2007,6 +2011,7 @@
    CONFIG_LOG_BUF_SHIFT=17
    # CONFIG_DETECT_SOFTLOCKUP is not set
    # CONFIG_SCHEDSTATS is not set
    +CONFIG_TIMER_STATS=y
    # CONFIG_DEBUG_SLAB is not set
    # CONFIG_DEBUG_PREEMPT is not set
    # CONFIG_DEBUG_RT_MUTEXES is not set CPU0
    0: 60357 XT-PIC-level timer
    1: 183 XT-PIC-level i8042
    2: 0 XT-PIC-level cascade
    5: 0 XT-PIC-level Intel 82801CA-ICH3
    6: 3 XT-PIC-level floppy
    8: 1 XT-PIC-level rtc
    9: 1 XT-PIC-level acpi
    11: 39 XT-PIC-level uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ohci1394, yenta, yenta, yenta, pcmcia2.0
    12: 114 XT-PIC-level i8042
    14: 2045 XT-PIC-level libata
    15: 0 XT-PIC-level libata
    NMI: 0
    LOC: 0
    ERR: 0
    MIS: 0
    58.75 50.70
    Mon Oct 2 11:32:07 EDT 2006
    CPU0
    0: 120338 XT-PIC-level timer
    1: 256 XT-PIC-level i8042
    2: 0 XT-PIC-level cascade
    5: 0 XT-PIC-level Intel 82801CA-ICH3
    6: 3 XT-PIC-level floppy
    8: 1 XT-PIC-level rtc
    9: 1 XT-PIC-level acpi
    11: 39 XT-PIC-level uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ohci1394, yenta, yenta, yenta, pcmcia2.0
    12: 114 XT-PIC-level i8042
    14: 2058 XT-PIC-level libata
    15: 0 XT-PIC-level libata
    NMI: 0
    LOC: 0
    ERR: 0
    MIS: 0
    116.04 110.64
    Mon Oct 2 11:33:04 EDT 2006
    CPU0
    0: 15931 XT-PIC-level timer
    1: 164 XT-PIC-level i8042
    2: 0 XT-PIC-level cascade
    5: 0 XT-PIC-level Intel 82801CA-ICH3
    6: 3 XT-PIC-level floppy
    8: 1 XT-PIC-level rtc
    9: 0 XT-PIC-level acpi
    11: 38 XT-PIC-level uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ohci1394, yenta, yenta, yenta, pcmcia2.0
    12: 114 XT-PIC-level i8042
    14: 2066 XT-PIC-level libata
    15: 0 XT-PIC-level libata
    NMI: 0
    LOC: 0
    ERR: 0
    MIS: 0
    73.89 6.84
    Mon Oct 2 11:23:24 EDT 2006
    CPU0
    0: 24314 XT-PIC-level timer
    1: 205 XT-PIC-level i8042
    2: 0 XT-PIC-level cascade
    5: 0 XT-PIC-level Intel 82801CA-ICH3
    6: 3 XT-PIC-level floppy
    8: 1 XT-PIC-level rtc
    9: 0 XT-PIC-level acpi
    11: 38 XT-PIC-level uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ohci1394, yenta, yenta, yenta, pcmcia2.0
    12: 114 XT-PIC-level i8042
    14: 2079 XT-PIC-level libata
    15: 0 XT-PIC-level libata
    NMI: 0
    LOC: 0
    ERR: 0
    MIS: 0
    118.96 11.36
    Mon Oct 2 11:24:09 EDT 2006
    Linux version 2.6.18-mm2 (valdis@turing-police.cc.vt.edu) (gcc version 4.1.1 20060926 (Red Hat 4.1.1-26)) #1 PREEMPT Mon Oct 2 10:45:34 EDT 2006
    BIOS-provided physical RAM map:
    sanitize start
    sanitize end
    copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
    copy_e820_map() type is E820_RAM
    copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
    copy_e820_map() start: 0000000000100000 size: 000000002fee2800 end: 000000002ffe2800 type: 1
    copy_e820_map() type is E820_RAM
    copy_e820_map() start: 000000002ffe2800 size: 000000000001d800 end: 0000000030000000 type: 2
    copy_e820_map() start: 00000000feda0000 size: 0000000000060000 end: 00000000fee00000 type: 2
    copy_e820_map() start: 00000000ffb80000 size: 0000000000480000 end: 0000000100000000 type: 2
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 0000000000100000 - 000000002ffe2800 (usable)
    BIOS-e820: 000000002ffe2800 - 0000000030000000 (reserved)
    BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
    BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
    767MB LOWMEM available.
    Entering add_active_range(0, 0, 196578) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 196578
    early_node_map[1] active PFN ranges
    0: 0 -> 196578
    On node 0 totalpages: 196578
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1503 pages used for memmap
    Normal zone: 190979 pages, LIFO batch:31
    DMI 2.3 present.
    ACPI: RSDP (v000 DELL ) @ 0x000fde50
    ACPI: RSDT (v001 DELL CPi R 0x27d40107 ASL 0x00000061) @ 0x000fde64
    ACPI: FADT (v001 DELL CPi R 0x27d40107 ASL 0x00000061) @ 0x000fde90
    ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x808
    Allocating PCI resources starting at 40000000 (gap: 30000000:ceda0000)
    Detected 1595.436 MHz processor.
    Built 1 zonelists. Total pages: 195043
    Kernel command line: vga=794 quiet crashkernel=64M@16M single
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffd000 (05603000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 706936k/786312k available (2406k kernel code, 78804k reserved, 1041k data, 180k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB)
    vmalloc : 0xf0800000 - 0xfffb5000 ( 247 MB)
    lowmem : 0xc0000000 - 0xeffe2000 ( 767 MB)
    .init : 0xc04e6000 - 0xc0513000 ( 180 kB)
    .data : 0xc0359960 - 0xc045e0a8 (1041 kB)
    .text : 0xc0100000 - 0xc0359960 (2406 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 3192.27 BogoMIPS (lpj=1596136)
    Security Framework v1.0.0 initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    selinux_register_security: Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: After all inits, caps: 3febf9ff 00000000 00000000 00000080 00000000 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU0: Thermal monitoring enabled
    CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz stepping 04
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20060707
    ACPI: setting ELCR to 0200 (from 0800)
    checking if image is initramfs... it is
    Freeing initrd memory: 1824k freed
    NET: Registered protocol family 16
    ACPI: ACPI Dock Station Driver
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
    PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
    PCI quirk: region 0880-08bf claimed by ICH4 GPIO
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    Boot video device is 0000:01:00.0
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
    ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
    ACPI: Power Resource [PADA] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 15 devices
    Intel 82802 RNG detected
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
    pnp: 00:02: ioport range 0x800-0x805 could not be reserved
    pnp: 00:02: ioport range 0x808-0x80f could not be reserved
    pnp: 00:03: ioport range 0x806-0x807 has been reserved
    pnp: 00:03: ioport range 0x810-0x85f could not be reserved
    pnp: 00:03: ioport range 0x860-0x87f has been reserved
    pnp: 00:03: ioport range 0x880-0x8bf has been reserved
    pnp: 00:03: ioport range 0x8c0-0x8df has been reserved
    pnp: 00:03: ioport range 0x8e0-0x8ff has been reserved
    pnp: 00:08: ioport range 0x900-0x91f has been reserved
    pnp: 00:08: ioport range 0x3f0-0x3f1 has been reserved
    PCI: Bridge: 0000:00:01.0
    IO window: c000-cfff
    MEM window: fc000000-fdffffff
    PREFETCH window: d8000000-e7ffffff
    PCI: Bus 3, cardbus bridge: 0000:02:01.0
    IO window: 0000e000-0000e0ff
    IO window: 0000e400-0000e4ff
    PREFETCH window: 40000000-41ffffff
    MEM window: f4000000-f5ffffff
    PCI: Bus 7, cardbus bridge: 0000:02:01.1
    IO window: 0000e800-0000e8ff
    IO window: 0000f000-0000f0ff
    PREFETCH window: 42000000-43ffffff
    MEM window: f6000000-f7ffffff
    PCI: Bus 11, cardbus bridge: 0000:02:03.0
    IO window: 0000f400-0000f4ff
    IO window: 0000f800-0000f8ff
    PREFETCH window: 44000000-45ffffff
    MEM window: fa000000-fbffffff
    PCI: Bridge: 0000:00:1e.0
    IO window: e000-ffff
    MEM window: f4000000-fbffffff
    PREFETCH window: 40000000-46ffffff
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Enabling device 0000:02:01.1 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 7, 524288 bytes)
    TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    Machine check exception polling timer started.
    speedstep: frequency transition measured seems out of range (0 nSec), falling back to a safe one of 500000 nSec.
    audit: initializing netlink socket (disabled)
    audit(1159803069.386:1): initialized
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    SELinux: Registering netfilter hooks
    io scheduler noop registered
    io scheduler anticipatory registered (default)
    io scheduler deadline registered
    io scheduler cfq registered
    vesafb: framebuffer at 0xe0000000, mapped to 0xf0880000, using 5120k, total 32768k
    vesafb: mode is 1280x1024x16, linelength=2560, pages=1
    vesafb: protected mode interface info at c000:e140
    vesafb: pmi: set display start = c00ce185, set palette = c00ce20a
    vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 160x64
    fb0: VESA VGA frame buffer device
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
    Hangcheck: Using get_cycles().
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    PCI: setting IRQ 5 as level-triggered
    ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI interrupt for device 0000:00:1f.6 disabled
    RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
    loop: loaded (max 8 devices)
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
    0000:02:00.0: 3Com PCI 3c905C Tornado at f0804c00.
    ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    0000:02:08.0: 3Com PCI 3c905C Tornado at f0806800.
    libata version 2.00 loaded.
    ata_piix 0000:00:1f.1: version 2.00ac7
    PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1f.1 to 64
    ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
    scsi0 : ata_piix
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
    usb usb1: new device found, idVendor=0000, idProduct=0000
    usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: UHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.18-mm2 uhci_hcd
    usb usb1: SerialNumber: 0000:00:1d.0
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
    usb usb2: new device found, idVendor=0000, idProduct=0000
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: UHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.18-mm2 uhci_hcd
    usb usb2: SerialNumber: 0000:00:1d.1
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
    usb usb3: new device found, idVendor=0000, idProduct=0000
    usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.18-mm2 uhci_hcd
    usb usb3: SerialNumber: 0000:00:1d.2
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    usbcore: registered new interface driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    input: PC Speaker as /class/input/input0
    input: AT Translated Set 2 keyboard as /class/input/input1
    ata1.00: ATA-6, max UDMA/100, 117210240 sectors: LBA
    ata1.00: ata1: dev 0 multi count 8
    ata1.01: ATAPI, max UDMA/33
    ata1.00: configured for UDMA/100
    usb 2-2: new low speed USB device using uhci_hcd and address 2
    ata1.01: configured for UDMA/33
    scsi1 : ata_piix
    usb 2-2: new device found, idVendor=045e, idProduct=0023
    usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 2-2: Product: Microsoft Trackball Optical®
    usb 2-2: Manufacturer: Microsoft
    usb 2-2: configuration #1 chosen from 1 choice
    input: Microsoft Microsoft Trackball Optical® as /class/input/input2
    input: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Optical®] on usb-0000:00:1d.1-2
    input: DualPoint Stick as /class/input/input3
    input: AlpsPS/2 ALPS DualPoint TouchPad as /class/input/input4
    scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2060A 0000 PQ: 0 ANSI: 5
    SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    sda:<6>i2c /dev entries driver
    device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
    EDAC MC: Ver: 2.0.1 Oct 2 2006
    Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
    ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    ALSA device list:
    No soundcards found.
    TCP bic registered
    Initializing XFRM netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    NET: Registered protocol family 15
    Using IPI Shortcut mode
    Time: tsc clocksource has been installed.
    Freeing unused kernel memory: 180k freed
    Write protecting the kernel read-only data: 433k
    sda1 sda2
    sd 0:0:0:0: Attached scsi disk sda
    scsi 0:0:1:0: CD-ROM TOSHIBA CDRW/DVD SDR2102 1D13 PQ: 0 ANSI: 5
    sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:1:0: Attached scsi CD-ROM sr0
    intel8x0_measure_ac97_clock: measured 50385 usecs
    intel8x0: clocking to 48000
    video bus notify
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    security: 6 users, 5 roles, 2013 types, 80 bools, 1 sens, 1024 cats
    security: 58 classes, 111120 rules
    SELinux: Completing initialization.
    SELinux: Setting up existing superblocks.
    SELinux: initialized (dev dm-0, type ext3), uses xattr
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
    SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
    SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
    SELinux: initialized (dev devpts, type devpts), uses transition SIDs
    SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
    SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
    SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
    SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
    SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
    SELinux: initialized (dev proc, type proc), uses genfs_contexts
    SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
    SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
    SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    audit(1159803074.616:2): policy loaded auid=4294967295
    audit(1159803074.993:3): avc: denied { execute } for pid=458 comm="rc.sysinit" name="hostname" dev=dm-0 ino=33031 scontext=system_u:system_r:initrc_t:s0 tcontext=system_u:object_r:hostname_exec_t:s0 tclass=file
    audit(1159803074.993:4): avc: denied { execute_no_trans } for pid=458 comm="rc.sysinit" name="hostname" dev=dm-0 ino=33031 scontext=system_u:system_r:initrc_t:s0 tcontext=system_u:object_r:hostname_exec_t:s0 tclass=file
    audit(1159803074.993:5): avc: denied { read } for pid=458 comm="rc.sysinit" name="hostname" dev=dm-0 ino=33031 scontext=system_u:system_r:initrc_t:s0 tcontext=system_u:object_r:hostname_exec_t:s0 tclass=file
    Real Time Clock Driver v1.12ac
    audit(1159803078.140:6): avc: denied { dac_override } for pid=488 comm="dmesg" capability=1 scontext=system_u:system_r:dmesg_t:s0 tcontext=system_u:system_r:dmesg_t:s0 tclass=capability
    audit(1159803079.947:7): avc: denied { dac_override } for pid=559 comm="pam_console_app" capability=1 scontext=system_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:system_r:pam_console_t:s0-s0:c0.c1023 tclass=capability
    ACPI: PCI Interrupt 0000:02:01.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[f8fff000-f8fff7ff] Max Packet=[2048] IR/IT contexts=[4/4]
    Yenta: CardBus bridge found at 0000:02:01.0 [1028:00d5]
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:02:01.0, mfunc 0x05033002, devctl 0x64
    Yenta: CardBus bridge found at 0000:02:01.1 [1028:00d5]
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:02:01.1, mfunc 0x05033002, devctl 0x64
    Yenta: CardBus bridge found at 0000:02:03.0 [12a3:ab01]
    Yenta: Enabling burst memory read transactions
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:02:03.0, mfunc 0x01000002, devctl 0x60
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.00 (30-Jul-2006)
    iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x0860)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Linux agpgart interface v0.101 (c) Dave Jones
    Yenta: ISA IRQ mask 0x0498, PCI irq 11
    Socket status: 30000020
    pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
    cs: IO port probe 0xe000-0xffff: clean.
    pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x46ffffff
    ohci1394: fw-host0: Running dma failed because Node ID is not valid
    Yenta: ISA IRQ mask 0x0498, PCI irq 11
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
    cs: IO port probe 0xe000-0xffff: clean.
    pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x46ffffff
    agpgart: Detected an Intel i845 Chipset.
    agpgart: AGP aperture is 64M @ 0xe8000000
    Yenta: ISA IRQ mask 0x0000, PCI irq 11
    Socket status: 30000010
    pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
    cs: IO port probe 0xe000-0xffff: clean.
    pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x46ffffff
    pccard: CardBus card inserted into slot 0
    PCI: Enabling device 0000:03:00.0 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:03:00.0 to 64
    eth2: Xircom cardbus revision 3 at irq 11
    PCI: Enabling device 0000:03:00.1 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:03:00.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    0000:03:00.1: ttyS1 at I/O 0xe080 (irq = 11) is a 16550A
    ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
    ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
    pccard: PCMCIA card inserted into slot 2
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[374fc0002a71c021]
    cs: memory probe 0xf4000000-0xfbffffff: excluding 0xf4000000-0xf8ffffff 0xfa000000-0xfbffffff
    pcmcia: registering new device pcmcia2.0
    orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
    orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
    pcmcia: request for exclusive IRQ could not be fulfilled.
    pcmcia: the driver needs updating to supported shared IRQ lines.
    cs: IO port probe 0x100-0x3af: excluding 0x370-0x37f
    cs: IO port probe 0x3e0-0x4ff: clean.
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: excluding 0x370-0x37f
    cs: IO port probe 0x3e0-0x4ff: clean.
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: excluding 0x370-0x37f
    cs: IO port probe 0x3e0-0x4ff: clean.
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    eth2: Hardware identity 0005:0004:0005:0000
    eth2: Station identity 001f:0001:0008:000a
    eth2: Firmware determined as Lucent/Agere 8.10
    eth2: Ad-hoc demo mode supported
    eth2: IEEE standard IBSS ad-hoc mode supported
    eth2: WEP supported, 104-bit key
    eth2: MAC address 00:02:2D:5C:11:48
    eth2: Station name "HERMES I"
    eth2: ready
    eth2: orinoco_cs at 2.0, irq 11, io 0xe100-0xe13f
    Non-volatile memory driver v1.2
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
    Netfilter messages via NETLINK v0.30.
    audit(1159803085.289:8): avc: denied { getattr } for pid=457 comm="rc.sysinit" name="hostname" dev=dm-0 ino=33031 scontext=system_u:system_r:initrc_t:s0 tcontext=system_u:object_r:hostname_exec_t:s0 tclass=file
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery absent)
    ACPI: Battery Slot [BAT1] (battery absent)
    ACPI: Lid Switch [LID]
    ACPI: Power Button (CM) [PBTN]
    ACPI: Sleep Button (CM) [SBTN]
    Using specific hotkey driver
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: Thermal Zone [THM] (67 C)
    EXT3 FS on dm-0, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev sda1, type ext3), uses xattr
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-11, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-11, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-7, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-8, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-9, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-10, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-10, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-6, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-4, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-4, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-5, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-1, type ext3), uses xattr
    Adding 1572856k swap on /dev/rootvg/swap. Priority:-1 extents:1 across:1572856k
    SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
    audit(1159803121.098:9): avc: denied { getattr } for pid=1508 comm="bash" name="cpuspeed" dev=dm-0 ino=197100 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:initrc_exec_t:s0 tclass=file
    audit(1159803121.098:10): avc: denied { execute } for pid=1508 comm="bash" name="cpuspeed" dev=dm-0 ino=197100 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:initrc_exec_t:s0 tclass=file
    audit(1159803121.098:11): avc: denied { read } for pid=1508 comm="bash" name="cpuspeed" dev=dm-0 ino=197100 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:initrc_exec_t:s0 tclass=file
    audit(1159803122.483:12): avc: denied { execute_no_trans } for pid=1535 comm="bash" name="cpuspeed" dev=dm-0 ino=197100 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:initrc_exec_t:s0 tclass=file
    audit(1159803122.527:13): avc: denied { ioctl } for pid=1535 comm="cpuspeed" name="cpuspeed" dev=dm-0 ino=197100 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:initrc_exec_t:s0 tclass=file
    audit(1159803122.572:14): avc: denied { getattr } for pid=1535 comm="cpuspeed" name="cpuspeed" dev=dm-7 ino=295240 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:cpuspeed_exec_t:s0 tclass=file
    audit(1159803122.617:15): avc: denied { execute } for pid=1539 comm="bash" name="cpuspeed" dev=dm-7 ino=295240 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:cpuspeed_exec_t:s0 tclass=file
    audit(1159803122.617:16): avc: denied { read } for pid=1539 comm="bash" name="cpuspeed" dev=dm-7 ino=295240 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:cpuspeed_exec_t:s0 tclass=file
    audit(1159803122.617:17): avc: denied { execute_no_trans } for pid=1540 comm="bash" name="cpuspeed" dev=dm-7 ino=295240 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:cpuspeed_exec_t:s0 tclass=file
    TSC appears to be running slowly. Marking it as unstable
    Time: acpi_pm clocksource has been installed.
    Linux version 2.6.18-mm2-hrt-dyntick5 (valdis@turing-police.cc.vt.edu) (gcc version 4.1.1 20060926 (Red Hat 4.1.1-26)) #1 PREEMPT Mon Oct 2 02:41:10 EDT 2006
    BIOS-provided physical RAM map:
    sanitize start
    sanitize end
    copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
    copy_e820_map() type is E820_RAM
    copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
    copy_e820_map() start: 0000000000100000 size: 000000002fee2800 end: 000000002ffe2800 type: 1
    copy_e820_map() type is E820_RAM
    copy_e820_map() start: 000000002ffe2800 size: 000000000001d800 end: 0000000030000000 type: 2
    copy_e820_map() start: 00000000feda0000 size: 0000000000060000 end: 00000000fee00000 type: 2
    copy_e820_map() start: 00000000ffb80000 size: 0000000000480000 end: 0000000100000000 type: 2
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 0000000000100000 - 000000002ffe2800 (usable)
    BIOS-e820: 000000002ffe2800 - 0000000030000000 (reserved)
    BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
    BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
    767MB LOWMEM available.
    Entering add_active_range(0, 0, 196578) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 196578
    early_node_map[1] active PFN ranges
    0: 0 -> 196578
    On node 0 totalpages: 196578
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1503 pages used for memmap
    Normal zone: 190979 pages, LIFO batch:31
    DMI 2.3 present.
    ACPI: RSDP (v000 DELL ) @ 0x000fde50
    ACPI: RSDT (v001 DELL CPi R 0x27d40107 ASL 0x00000061) @ 0x000fde64
    ACPI: FADT (v001 DELL CPi R 0x27d40107 ASL 0x00000061) @ 0x000fde90
    ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x808
    Allocating PCI resources starting at 40000000 (gap: 30000000:ceda0000)
    Detected 1595.398 MHz processor.
    Built 1 zonelists. Total pages: 195043
    Kernel command line: vga=794 quiet crashkernel=64M@16M single
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffd000 (05603000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    Clock event device pit configured with caps set: 07
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 706888k/786312k available (2412k kernel code, 78852k reserved, 1044k data, 180k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB)
    vmalloc : 0xf0800000 - 0xfffb5000 ( 247 MB)
    lowmem : 0xc0000000 - 0xeffe2000 ( 767 MB)
    .init : 0xc04e8000 - 0xc0515000 ( 180 kB)
    .data : 0xc035b03f - 0xc0460128 (1044 kB)
    .text : 0xc0100000 - 0xc035b03f (2412 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 3192.28 BogoMIPS (lpj=1596144)
    Security Framework v1.0.0 initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    selinux_register_security: Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: After all inits, caps: 3febf9ff 00000000 00000000 00000080 00000000 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU0: Thermal monitoring enabled
    CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz stepping 04
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20060707
    ACPI: setting ELCR to 0200 (from 0800)
    checking if image is initramfs... it is
    Freeing initrd memory: 1824k freed
    NET: Registered protocol family 16
    ACPI: ACPI Dock Station Driver
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
    PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
    PCI quirk: region 0880-08bf claimed by ICH4 GPIO
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    Boot video device is 0000:01:00.0
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
    ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
    ACPI: Power Resource [PADA] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 15 devices
    Intel 82802 RNG detected
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
    pnp: 00:02: ioport range 0x800-0x805 could not be reserved
    pnp: 00:02: ioport range 0x808-0x80f could not be reserved
    pnp: 00:03: ioport range 0x806-0x807 has been reserved
    pnp: 00:03: ioport range 0x810-0x85f could not be reserved
    pnp: 00:03: ioport range 0x860-0x87f has been reserved
    pnp: 00:03: ioport range 0x880-0x8bf has been reserved
    pnp: 00:03: ioport range 0x8c0-0x8df has been reserved
    pnp: 00:03: ioport range 0x8e0-0x8ff has been reserved
    pnp: 00:08: ioport range 0x900-0x91f has been reserved
    pnp: 00:08: ioport range 0x3f0-0x3f1 has been reserved
    PCI: Bridge: 0000:00:01.0
    IO window: c000-cfff
    MEM window: fc000000-fdffffff
    PREFETCH window: d8000000-e7ffffff
    PCI: Bus 3, cardbus bridge: 0000:02:01.0
    IO window: 0000e000-0000e0ff
    IO window: 0000e400-0000e4ff
    PREFETCH window: 40000000-41ffffff
    MEM window: f4000000-f5ffffff
    PCI: Bus 7, cardbus bridge: 0000:02:01.1
    IO window: 0000e800-0000e8ff
    IO window: 0000f000-0000f0ff
    PREFETCH window: 42000000-43ffffff
    MEM window: f6000000-f7ffffff
    PCI: Bus 11, cardbus bridge: 0000:02:03.0
    IO window: 0000f400-0000f4ff
    IO window: 0000f800-0000f8ff
    PREFETCH window: 44000000-45ffffff
    MEM window: fa000000-fbffffff
    PCI: Bridge: 0000:00:1e.0
    IO window: e000-ffff
    MEM window: f4000000-fbffffff
    PREFETCH window: 40000000-46ffffff
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Enabling device 0000:02:01.1 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 7, 524288 bytes)
    TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    Machine check exception polling timer started.
    speedstep: frequency transition measured seems out of range (0 nSec), falling back to a safe one of 500000 nSec.
    audit: initializing netlink socket (disabled)
    audit(1159802531.385:1): initialized
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    SELinux: Registering netfilter hooks
    io scheduler noop registered
    io scheduler anticipatory registered (default)
    io scheduler deadline registered
    io scheduler cfq registered
    vesafb: framebuffer at 0xe0000000, mapped to 0xf0880000, using 5120k, total 32768k
    vesafb: mode is 1280x1024x16, linelength=2560, pages=1
    vesafb: protected mode interface info at c000:e140
    vesafb: pmi: set display start = c00ce185, set palette = c00ce20a
    vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 160x64
    fb0: VESA VGA frame buffer device
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
    Hangcheck: Using get_cycles().
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    PCI: setting IRQ 5 as level-triggered
    ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI interrupt for device 0000:00:1f.6 disabled
    RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
    loop: loaded (max 8 devices)
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
    0000:02:00.0: 3Com PCI 3c905C Tornado at f0804c00.
    ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    0000:02:08.0: 3Com PCI 3c905C Tornado at f0806800.
    libata version 2.00 loaded.
    ata_piix 0000:00:1f.1: version 2.00ac7
    PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1f.1 to 64
    ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
    scsi0 : ata_piix
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
    usb usb1: new device found, idVendor=0000, idProduct=0000
    usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: UHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.18-mm2-hrt-dyntick5 uhci_hcd
    usb usb1: SerialNumber: 0000:00:1d.0
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
    usb usb2: new device found, idVendor=0000, idProduct=0000
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: UHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.18-mm2-hrt-dyntick5 uhci_hcd
    usb usb2: SerialNumber: 0000:00:1d.1
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
    usb usb3: new device found, idVendor=0000, idProduct=0000
    usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.18-mm2-hrt-dyntick5 uhci_hcd
    usb usb3: SerialNumber: 0000:00:1d.2
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    usbcore: registered new interface driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    input: PC Speaker as /class/input/input0
    input: AT Translated Set 2 keyboard as /class/input/input1
    ata1.00: ATA-6, max UDMA/100, 117210240 sectors: LBA
    ata1.00: ata1: dev 0 multi count 8
    ata1.01: ATAPI, max UDMA/33
    ata1.00: configured for UDMA/100
    usb 2-2: new low speed USB device using uhci_hcd and address 2
    ata1.01: configured for UDMA/33
    scsi1 : ata_piix
    usb 2-2: new device found, idVendor=045e, idProduct=0023
    usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 2-2: Product: Microsoft Trackball Optical®
    usb 2-2: Manufacturer: Microsoft
    usb 2-2: configuration #1 chosen from 1 choice
    input: Microsoft Microsoft Trackball Optical® as /class/input/input2
    input: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Optical®] on usb-0000:00:1d.1-2
    input: DualPoint Stick as /class/input/input3
    input: AlpsPS/2 ALPS DualPoint TouchPad as /class/input/input4
    scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2060A 0000 PQ: 0 ANSI: 5
    SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    sda:<6>i2c /dev entries driver
    device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
    EDAC MC: Ver: 2.0.1 Oct 2 2006
    Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
    ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    ALSA device list:
    No soundcards found.
    TCP bic registered
    Initializing XFRM netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    NET: Registered protocol family 15
    Using IPI Shortcut mode
    Time: tsc clocksource has been installed.
    Clock event device pit configured with caps set: 08
    Switched to high resolution mode on CPU 0
    Freeing unused kernel memory: 180k freed
    Write protecting the kernel read-only data: 434k
    sda1 sda2
    sd 0:0:0:0: Attached scsi disk sda
    scsi 0:0:1:0: CD-ROM TOSHIBA CDRW/DVD SDR2102 1D13 PQ: 0 ANSI: 5
    sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:1:0: Attached scsi CD-ROM sr0
    intel8x0_measure_ac97_clock: measured 51386 usecs
    intel8x0: clocking to 48000
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    security: 6 users, 5 roles, 2013 types, 80 bools, 1 sens, 1024 cats
    security: 58 classes, 111120 rules
    SELinux: Completing initialization.
    SELinux: Setting up existing superblocks.
    SELinux: initialized (dev dm-0, type ext3), uses xattr
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
    SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
    SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
    SELinux: initialized (dev devpts, type devpts), uses transition SIDs
    SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
    SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
    SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
    SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
    SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
    SELinux: initialized (dev proc, type proc), uses genfs_contexts
    SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
    SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
    SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    audit(1159802536.642:2): policy loaded auid=4294967295
    audit(1159802537.006:3): avc: denied { execute } for pid=457 comm="rc.sysinit" name="hostname" dev=dm-0 ino=33031 scontext=system_u:system_r:initrc_t:s0 tcontext=system_u:object_r:hostname_exec_t:s0 tclass=file
    audit(1159802537.006:4): avc: denied { execute_no_trans } for pid=457 comm="rc.sysinit" name="hostname" dev=dm-0 ino=33031 scontext=system_u:system_r:initrc_t:s0 tcontext=system_u:object_r:hostname_exec_t:s0 tclass=file
    audit(1159802537.006:5): avc: denied { read } for pid=457 comm="rc.sysinit" name="hostname" dev=dm-0 ino=33031 scontext=system_u:system_r:initrc_t:s0 tcontext=system_u:object_r:hostname_exec_t:s0 tclass=file
    Real Time Clock Driver v1.12ac
    audit(1159802539.162:6): avc: denied { dac_override } for pid=487 comm="dmesg" capability=1 scontext=system_u:system_r:dmesg_t:s0 tcontext=system_u:system_r:dmesg_t:s0 tclass=capability
    audit(1159802540.991:7): avc: denied { dac_override } for pid=542 comm="pam_console_app" capability=1 scontext=system_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:system_r:pam_console_t:s0-s0:c0.c1023 tclass=capability
    ACPI: PCI Interrupt 0000:02:01.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[f8fff000-f8fff7ff] Max Packet=[2048] IR/IT contexts=[4/4]
    Yenta: CardBus bridge found at 0000:02:01.0 [1028:00d5]
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:02:01.0, mfunc 0x05033002, devctl 0x64
    Yenta: CardBus bridge found at 0000:02:01.1 [1028:00d5]
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:02:01.1, mfunc 0x05033002, devctl 0x64
    Yenta: CardBus bridge found at 0000:02:03.0 [12a3:ab01]
    Yenta: Enabling burst memory read transactions
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:02:03.0, mfunc 0x01000002, devctl 0x60
    Linux agpgart interface v0.101 (c) Dave Jones
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.00 (30-Jul-2006)
    iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x0860)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    agpgart: Detected an Intel i845 Chipset.
    agpgart: AGP aperture is 64M @ 0xe8000000
    ohci1394: fw-host0: Running dma failed because Node ID is not valid
    Yenta: ISA IRQ mask 0x0498, PCI irq 11
    Socket status: 30000020
    pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
    cs: IO port probe 0xe000-0xffff: clean.
    pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x46ffffff
    Yenta: ISA IRQ mask 0x0498, PCI irq 11
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
    cs: IO port probe 0xe000-0xffff: clean.
    pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x46ffffff
    Yenta: ISA IRQ mask 0x0000, PCI irq 11
    Socket status: 30000010
    pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
    cs: IO port probe 0xe000-0xffff: clean.
    pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x46ffffff
    pccard: CardBus card inserted into slot 0
    PCI: Enabling device 0000:03:00.0 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:03:00.0 to 64
    eth2: Xircom cardbus revision 3 at irq 11
    PCI: Enabling device 0000:03:00.1 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:03:00.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    0000:03:00.1: ttyS1 at I/O 0xe080 (irq = 11) is a 16550A
    ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
    ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
    pccard: PCMCIA card inserted into slot 2
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[374fc0002a71c021]
    cs: IO port probe 0x100-0x3af: excluding 0x370-0x37f
    cs: IO port probe 0x3e0-0x4ff: clean.
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: excluding 0x370-0x37f
    cs: IO port probe 0x3e0-0x4ff: clean.
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: memory probe 0xf4000000-0xfbffffff: excluding 0xf4000000-0xf8ffffff 0xfa000000-0xfbffffff
    pcmcia: registering new device pcmcia2.0
    cs: IO port probe 0x100-0x3af: excluding 0x370-0x37f
    cs: IO port probe 0x3e0-0x4ff: clean.
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
    orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
    pcmcia: request for exclusive IRQ could not be fulfilled.
    pcmcia: the driver needs updating to supported shared IRQ lines.
    eth2: Hardware identity 0005:0004:0005:0000
    eth2: Station identity 001f:0001:0008:000a
    eth2: Firmware determined as Lucent/Agere 8.10
    eth2: Ad-hoc demo mode supported
    eth2: IEEE standard IBSS ad-hoc mode supported
    eth2: WEP supported, 104-bit key
    eth2: MAC address 00:02:2D:5C:11:48
    eth2: Station name "HERMES I"
    eth2: ready
    eth2: orinoco_cs at 2.0, irq 11, io 0xe100-0xe13f
    Non-volatile memory driver v1.2
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
    Netfilter messages via NETLINK v0.30.
    audit(1159802546.388:8): avc: denied { getattr } for pid=456 comm="rc.sysinit" name="hostname" dev=dm-0 ino=33031 scontext=system_u:system_r:initrc_t:s0 tcontext=system_u:object_r:hostname_exec_t:s0 tclass=file
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery absent)
    ACPI: Battery Slot [BAT1] (battery absent)
    ACPI: Lid Switch [LID]
    ACPI: Power Button (CM) [PBTN]
    ACPI: Sleep Button (CM) [SBTN]
    Using specific hotkey driver
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: Thermal Zone [THM] (68 C)
    EXT3 FS on dm-0, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev sda1, type ext3), uses xattr
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-11, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-11, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-7, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-8, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-9, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-10, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-10, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-6, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-4, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-4, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-5, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev dm-1, type ext3), uses xattr
    Adding 1572856k swap on /dev/rootvg/swap. Priority:-1 extents:1 across:1572856k
    SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
    audit(1159802586.630:9): avc: denied { getattr } for pid=1502 comm="bash" name="spamassassin" dev=dm-0 ino=197880 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:initrc_exec_t:s0 tclass=file
    audit(1159802586.630:10): avc: denied { execute } for pid=1502 comm="bash" name="spamassassin" dev=dm-0 ino=197880 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:initrc_exec_t:s0 tclass=file
    audit(1159802586.630:11): avc: denied { read } for pid=1502 comm="bash" name="spamassassin" dev=dm-0 ino=197880 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:initrc_exec_t:s0 tclass=file
    audit(1159802592.469:12): avc: denied { execute_no_trans } for pid=1525 comm="bash" name="cpuspeed" dev=dm-0 ino=197100 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:initrc_exec_t:s0 tclass=file
    audit(1159802592.506:13): avc: denied { ioctl } for pid=1525 comm="cpuspeed" name="cpuspeed" dev=dm-0 ino=197100 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:initrc_exec_t:s0 tclass=file
    audit(1159802592.551:14): avc: denied { getattr } for pid=1525 comm="cpuspeed" name="cpuspeed" dev=dm-7 ino=295240 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:cpuspeed_exec_t:s0 tclass=file
    audit(1159802592.585:15): avc: denied { execute } for pid=1529 comm="bash" name="cpuspeed" dev=dm-7 ino=295240 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:cpuspeed_exec_t:s0 tclass=file
    audit(1159802592.585:16): avc: denied { read } for pid=1529 comm="bash" name="cpuspeed" dev=dm-7 ino=295240 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:cpuspeed_exec_t:s0 tclass=file
    audit(1159802592.586:17): avc: denied { execute_no_trans } for pid=1530 comm="bash" name="cpuspeed" dev=dm-7 ino=295240 scontext=system_u:system_r:sysadm_t:s0 tcontext=system_u:object_r:cpuspeed_exec_t:s0 tclass=file
    [unhandled content-type:application/pgp-signature]
    \
     
     \ /
      Last update: 2006-10-02 20:29    [W:0.134 / U:59.240 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site